1,232 research outputs found
Drained cyclic behaviour of loose Dogs Bay sand
The results of drained cyclic triaxial tests performed on
Dogs Bay sand (a carbonate sand) are discussed in this
paper. For this sand it has been previously demonstrated
that the critical state exists and is unique. The relationship
between volumetric strains due to cyclic loading and
the critical state of this material under monotonic conditions
is explored here. Drained cyclic tests on loose
samples have been carried out, applying different amplitudes
of cyclic loading for samples that generally have
initial states on the wet side of critical. The trends of
behaviour are summarised, pointing out the relationship
between initial state parameter, amplitude of cyclic loading
and final change in the state parameter at equilibrium.
Experimental evidence is also given to demonstrate
that the sand has a memory of the volumetric
strain that has previously occurred when different patterns
of cyclic loading are consecutively applied and
equilibrium has not been reached
Performance of heterogeneous earthfill dams under earthquakes: optimal location of the impervious core
Earthfill dams are man-made geostructures which may be especially damaged by seismic loadings, because the soil skeleton they are made of suffers remarkable modifications in its mechanical properties, as well as changes of pore water pressure and flow of this water inside their pores, when subjected to vibrations. The most extreme situation is the dam failure due to soil liquefaction. Coupled finite element numerical codes are a useful tool to assess the safety of these dams. In this paper the application of a fully coupled numerical model, previously developed and validated by the authors, to a set of theoretical cross sections of earthfill dams with impervious core, is presented. All these dams are same height and have the same volume of impervious material at the core. The influence of the core location inside the dam on its response against seismic loading is numerically explored. The dams are designed as strictly stable under static loads. As a result of this research, a design recommendation on the location of the impervious core is obtained for this type of earth dams, on the basis of the criteria of minor liquefaction risk, minor soil degradation during the earthquake and minor crest settlement
Effect of Class F Fly Ash on Fine Sand Compaction through Soil Stabilization
This paper presents the results of an experimental investigation carried out to
evaluate the effect of fly ash (FA) on fine sand compaction and its suitability as a
material for embankments. The literature review demonstrates the lack of research
on stabilization of sandy material using FA. The study is concerned with the role of
FA content in stabilized soil physical characteristics. The main aim of this paper is
to determine the optimum quantity of FA content for stabilization of this type of
soil. This is achieved through particle size distribution and compaction (standard
proctor) tests. The sand was stabilized with three proportions of FA (5%, 10% and
15%) and constant cement content of 3% was used as an activator. For better
comparison, the sand was also stabilized by 3% cement only so that the effect of
FA could be observed more clearly. The results were in line with the literature for
other types of soil, i.e. as the % of FA increases, reduction in maximum dry density
and higher optimum moisture content were observed
Recommended from our members
Exploring the Effect of Different Team Compositions on Team Motivation, Student Satisfaction and Performance in Team Practical Activities
The main source of diversity in engineering education usually is the distinct level of motivation, which sometimes causes lack of engagement. Working in motivated teams is likely to enhance the overall performance of the whole group. The aim of this paper is to find the best composition of teams in practical activities proposed in the classroom for engineering students to enhance team motivation. The experience with a group of Civil Engineering students at the University of West London is presented as a case study. This group was very diverse in the level of individual motivation. In this experiment, the whole group was split in two subgroups, and each one divided in teams of 3 people. For one of the subgroups, the distribution in teams was forced by the lecturer, while for the second one the students were allowed to freely distribute themselves. All teams were requested to solve a practical activity, consisting of the classification of several soils according to three different systems, based on experimental data equally provided to all the students. The different results obtained for both configurations of teams show an overall better performance for the âforcedâ composition, with a higher level of student satisfaction on the activity and on their achieved learning
Numerical simulation of observed liquefaction phenomena from the 2011 Christchurch (New Zealand) event
Soil liquefaction at the ground often cause damages to various infrastructure assets.
Its consequences have been widely made evident by the performance of the Telecommunication
Network Services during the 2010-2011 Canterbury Earthquake Sequence (CES) which stroke
the Canterbury region in New Zealand. Despite the relevance of loss of functionality of the
telecommunication system, especially during the post-event recovery phase, studies in the
literature on the network performance about damages due to liquefaction are still limited.
Exploring an unprecedented database of in-situ geotechnical inspections collected after the CES,
this research first compares alternative empirical liquefaction-triggering models available in the
literature with observation maps. Then, a soil column profile is evaluated adopting a constitutive
model based on generalised plasticity (âmodified Pastor-Zienkiewiczâ) through a Finite Element
based home-developed code. The obtained results from the numerical models are finally crosschecked with the empirical analyses, the existing liquefaction investigation maps and field
observations collected in the aftermath of the CES
Influence of Fines Content on Liquefaction from a Critical State Framework: the Christchurch Earthquake Case Study
In earthquake engineering practice, the liquefaction potential of soils is commonly evaluated through simplified procedures. These approaches are suitable for sands with very low to no fines content, which have been traditionally thought to be the only liquefiable materials. However, field observations and experimental research have extensively demonstrated that low plasticity silty sands can also be highly liquefiable. Thus, this paper investigates the effect of nonplastic fines contents on the liquefaction potential of soils, taking the 2010â2011 Canterbury Earthquake Sequence as a case study. The validity of standard simplified procedures for high fines content soils is critically evaluated and compared with a finite element model based on a full solidâfluid coupled formulation. The model includes a state parameter-based constitutive law within the generalised plasticity theory, which allows the fines content to be taken into account explicitly. The standard simplified procedures are shown to be less effective in the evaluation of liquefaction potential in soils with high fines content but are still indispensable tools for evaluating the performance of soils over large urban areas. As the main conclusion, it is recommended that empirical models are complemented with an advanced numerical analysis in those cases where silty sands with high fines content are identified, as its outcomes can more realistically represent the soil behaviour during a seismic event
Monitoring the impact of desert dust outbreaks for air quality for health studies
We review the major features of desert dust outbreaks that are relevant to the assessment of dust impacts upon human health. Our ultimate goal is to provide scientific guidance for the acquisition of relevant population exposure information for epidemiological studies tackling the short and long term health effects of desert dust. We first describe the source regions and the typical levels of dust particles in regions close and far away from the source areas, along with their size, composition, and bio-aerosol load. We then describe the processes by which dust may become mixed with anthropogenic particulate matter (PM) and/or alter its load in receptor areas. Short term health effects are found during desert dust episodes in different regions of the world, but in a number of cases the results differ when it comes to associate the effects to the bulk PM, the desert dust-PM, or non-desert dust-PM. These differences are likely due to the different monitoring strategies applied in the epidemiological studies, and to the differences on atmospheric and emission (natural and anthropogenic) patterns of desert dust around the world. We finally propose methods to allow the discrimination of health effects by PM fraction during dust outbreaks, and a strategy to implement desert dust alert and monitoring systems for health studies and air quality management.The systematic review was funded by WHO with as part of a Grant Agreement with Ministry of Foreign Affairs, Norway. Thanks are also given to the Spanish Ministry for the Ecological Transition for long term support in the last 2 decades to our projects on African dust effects on air quality over Spain; to the Spanish Ministry of Science, Innovation and Universities and FEDER Funds for the HOUSE project (CGL2016-78594-R), and to the Generalitat de Catalunya (AGAUR 2017 SGR41). Carlos PĂ©rez GarcĂa-Pando acknowledges long-term support from the AXA Research Fund, as well as the support received through the RamĂłn y Cajal program (grant RYC-2015-18690) of the Spanish Ministry of Science, Innovation and Universities.Peer ReviewedPostprint (published version
Understanding the experiences of cardiovascular disease management in low income areas
Justification: Cardiovascular diseases (CVD) are one of the main causes of death and disability in the UK. This studyâs principal aim was to produce a thorough picture of everyday reality for people with CVD and other chronic health conditions who live in economically deprived neighbourhoods in Liverpool and are themselves experiencing economic difficulties. Methodology: this was a qualitative, exploratory study based on in-depth semi-structured qualitative interviews conducted with 14 participants whose cardiovascular health was compromised between July and August 2017. The study sample included 14 people (3 women) ranged from 54 to 76 years of age. Thematic analysis was used for data analysis and the biographical disruption concept was used as theoretical reference to explore the results. Wider health inequalities literature supplemented the individual experiences of chronic illness. Results: Four main themes emerged from the data: (1) âhow illness has affected me and those close to meâ (2) âstruggling for moneyâ, (3) âcoping with poor lifestyleâ, and (4) âreflections on current careâ. The varied nature of participants' narratives about their chronic illness indicated that the experience of biographical disruption depends on the wide social-economic and cultural factors (macro-context) of the individual. Discussion: A better understanding of the barriers that interfere with low-income individualsâ decision-making process is needed to be able to support people with chronic conditions living in more disadvantaged areas, to self-manage their health and wellbeing more effectively. This study suggests that biographical disruption theory combined with health inequalities evidence enhances the study of experiences of chronic illness management
Efficient Scalable Computing through Flexible Applications and Adaptive Workloads
In this paper we introduce a methodology for dynamic job reconfiguration driven by the programming model runtime in collaboration with the global resource manager. We improve the system throughput by exploiting malleability techniques (in terms of number of MPI ranks) through the reallocation of resources assigned to a job during its execution. In our proposal, the OmpSs runtime reconfigures the number of MPI ranks during the execution of an application in cooperation with the Slurm workload manager. In addition, we take advantage of OmpSs offload semantics to allow application developers deal with data redistribution. By combining these elements a job is able to expand itself in order to exploit idle nodes or be shrunk if other queued jobs could be initiated. This novel approach adapts the system workload in order to increase the throughput as well as make a smarter use of the underlying resources. Our experiments demonstrate that this approach can reduce the total execution time of a practical workload by more than 40% while reducing the amount of resources by 30%.This work is supported by the Project TIN2014-53495-R and TIN2015-65316-P from MINECO and FEDER. Antonio J. Peña is cofinanced by MINECO under Juan de la Cierva fellowship number IJCI-2015-23266. Special thanks to José I. Aliaga for the conjugate gradient code.Peer ReviewedPostprint (author's final draft
Element behaviour during combustion in coal-fired Orhaneli power plant, Bursa-Turkey
This study focuses on element behaviour during combustion in the Orhaneli thermal power plant (a 210 MW unit, Bursa-Turkey). A total of 51 samples, feed coals (FCs), fly ashes (FAs) and bottom ashes (BAs), which were systematically collected over an eight-week period, have been analysed for major, minor and trace elements (Al, Ca, Fe, K, Mg, Na, S, As, B, Ba, Be, Bi, Cd, Co, Cr, Cs, Cu, Ga, Ge, Hf, Hg, Li, Mn, Mo, Nb, Ni, P, Pb, Rb, Sb, Sc, Se, Sn, Sr, Ta, Th, Ti, Tl, U, V, W, Y, Zn, Zr and REEs). This study shows that FCs on an airdried basis have high moisture (av. 9%), high volatile matter (av. 33%), very high ash yield (av. 53%), relatively high sulfur content (av. 2.14%) and low gross calorific value (av. 1775 kcal/kg). Proximate analyses of combustion residues imply that BAs have higher contents of unburned carbonaceous matter than FAs. Mean values of trace element concentrations in FCs fall within the ranges of most world coals, except for Cr, Cs, Ni and U which occur in concentrations slightly higher than those determined for most of world coals. Some elements such as S, Hg, As, B, Bi, Cd, Cs, Ge, K, Pb, Rb, Sb, Se, Sn, Tl, and Zn are indicating enrichments in FAs. The remaining elements investigated in this study have no clear segregation between FAs and BAs. The mass balance calculations point to Ca content of feed coal controlling the partitioning of elements in this power plant, producing a high removal efficiency for highly volatile elements such as Hg, B and Se, and a high retention of As, Bi, Cd, Cs, Ge, Pb, Rb, Sb, Sn, Tl and Zn in FAs. However, the high enrichment in trace elements of FAs can increase the hazardous potential of this coal by-product
- âŠ