Influence of chain topology (cyclic versus linear) on the nucleation and isothermal crystallization of poly(L-lactide) and poly(D-lactide)

In this paper, ring closure click chemistry methods have been used to produce cyclic c-PLLA and c-PDLA of a number average molecular weight close to 10 kg/mol. The effects of stereochemistry of the polymer chains and their topology on their structure, nucleation and crystallization were studied in detail employing Wide Angle X-ray Scattering (WAXS), Small Angle X-ray Scattering (SAXS), Polarized Light Optical Microscopy (PLOM) and standard and advanced Differential Scanning Calorimetry (DSC). The crystal structures of linear and cyclic PLAs are identical to each other and no differences in superstructural morphology could be detected. Cyclic PLA chains are able to nucleate much faster and to produce a higher number of nuclei in comparison to linear analogues, either upon cooling from the melt or upon heating from the glassy state. In the samples prepared in this work, a small fraction of linear or higher molecular weight cycles was detected (according to SEC analyses). The presence of such “impurities” retards spherulitic growth rates of c-PLAs making them nearly the same as those of l-PLAs. On the other hand, the overall crystallization rate determined by DSC was much larger for c-PLAs, as a consequence of the enhanced nucleation that occurs in cyclic chains. The equilibrium melting temperatures of cyclic chains were determined and found to be 5 ºC higher in comparison with values for l-PLAs. This result is a consequence of the lower entropy of cyclic chains in the melt. Self-nucleation studies demonstrated that c-PLAs have a shorter crystalline memory than linear analogues, as a result of their lower entanglement density. Successive self-nucleation and annealing (SSA) experiments reveal the remarkable ability of cyclic molecules to thicken, even to the point of crystallization with extended collapsed ring conformations. In general terms, stereochemistry had less influence on the results obtained in comparison with the dominating effect of chain topology.“UPV/EHU Infrastructure: INF 14/38”; “Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13–4E–1726” and “Mineco MAT2014-53437-C2-P”, 'Ministerio de Economia y Competitividad (MINECO), code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza (Basque Government), code: IT-654-13. O.C acknowledges financial support from the European Commission and Région Wallonne FEDER program (Materia Nova) and OPTI²MAT program of excellence, by the Interuniversity Attraction Pole Program (P7/05) initiated by the Belgian Science Policy office and by the FNRS-FRFC. OC is Research Associate of the F.R.S.-FNRS. Organic Synthesis and Mass Spectrometry Laboratory thanks F.R.S.-FNRS for the financial support for the acquisition of the Waters QToF Premier and Synapt-G2Si mass spectrometers and for continuing support. Finally, all authors would like to acknowledge Research and Innovation Staff Exchange (RISE) H2020-MSCA-RISE-2017-778092, project BIODEST for promoting cooperation between the Mons team and the UPV/EHU team

Atmospheric Aerosol Assisted Pulsed Plasma Polymerization: An Environmentally Friendly Technique for Tunable Catechol-Bearing Thin Films

In this work, an atmospheric aerosol assisted pulsed plasma process is reported as an environmentally friendly technique for the preparation of tunable catechol-bearing thin films under solvent and catalyst free conditions. The approach relies on the direct injection of dopamine acrylamide dissolved in 2-hydroxyethylmethacrylate as comonomer into the plasma zone. By adjusting the pulsing of the electrical discharge, the reactive plasma process can be alternatively switch ON (tON) and OFF (tOFF) during different periods of time, thus allowing a facile and fine tuning of the catechol density, morphology and deposition rate of the coating. An optimal tON/tOFF ratio is established, that permits maximizing the catechol content in the deposited film. Finally, a diagram, based on the average energy input into the process, is proposed allowing for easy custom synthesis of layers with specific chemical and physical properties, thus highlighting the utility of the developed dry plasma route

Emerging polyhydroxyurethanes as sustainable thermosets: a structure–property relationship

peer reviewedPolyhydroxyurethanes (PHU), obtained from CO2-based cyclic carbonates (CC) and polyamines, are known as greener and safer alternatives to conventional polyurethanes. Interestingly, the hydroxyurethane moieties present along the PHU’s backbone offer unexplored opportunities in terms of enhanced adhesion and mechanical properties that could be a major breakthrough in many structural applications. Furthermore, PHUs have shown thermomechanical recyclability arising from the ability of hydroxyurethane moieties to participate in reversible exchange reactions. However, the relationship between the macromolecular structure, the processability, and the final properties of these materials have not been evaluated to a sufficient extent to establish a comprehensive overview of these emerging thermosets. In this sense, this work aims to address this research gap by investigating the rheological and thermomechanical performances of PHU thermosets and opening an unexplored door for future sustainable engineered structural applications. A special emphasis was put on PHU thermosets formulated using potentially biobased monomers. The rheological behavior during cross-linking of the PHU formulations was studied and highlighted the importance of the number of CC functionalities in the viscosity and gel time, ranging from 10 min to nearly 3 h. Moduli superior to 2 GPa and glass transition over 50 °C were obtained for short multifunctional CC. Finally, the dynamic network behavior of these PHUs was also demonstrated through stress-relaxation and reprocessing. High temperatures (over 150 °C) and pressure lead to a good recovery of the thermomechanical properties. Such materials appear to be an interesting platform for structural applications, particularly fiber-reinforced polymers, that can overcome many sustainability challenges.The " Non-Isocyanate Polyurethanes - European Joint Doctorate " [ NIPU-EJD

Direct observation of active material concentration gradients and crystallinity breakdown in LiFePO4 electrodes during charge/discharge cycling of lithium batteries

The phase changes that occur during discharge of an electrode comprised of LiFePO4, carbon, and PTFE binder have been studied in lithium half cells by using X-ray diffraction measurements in reflection geometry. Differences in the state of charge between the front and the back of LiFePO4 electrodes have been visualized. By modifying the X-ray incident angle the depth of penetration of the X-ray beam into the electrode was altered, allowing for the examination of any concentration gradients that were present within the electrode. At high rates of discharge the electrode side facing the current collector underwent limited lithium insertion while the electrode as a whole underwent greater than 50% of discharge. This behavior is consistent with depletion at high rate of the lithium content of the electrolyte contained in the electrode pores. Increases in the diffraction peak widths indicated a breakdown of crystallinity within the active material during cycling even during the relatively short duration of these experiments, which can also be linked to cycling at high rate

Instability zones for satellites of asteroids. The example of the (87) Sylvia system

We study the stability of the (87) Sylvia system and of the neighborhood of its two satellites. We use numerical integrations considering the non-sphericity of Sylvia, as well as the mutual perturbation of the satellites and the solar perturbation. Two numerical models have been used, which describe respectively the short and long-term evolution of the system. We show that the actual system is in a deeply stable zone, but surrounded by both fast and secular chaotic regions due to resonances. We then investigate how tidal and BYORP effects modify the location of the system over time with respect to the instability zones. Finally, we briefly generalize this study to other known triple systems and to satellites of asteroids in general, and discuss about their distance from mean-motion and evection resonances.Comment: 25 pages, 11 figures. Submitted to Icaru

Determinants of GBP Recruitment to Toxoplasma gondii Vacuoles and the Parasitic Factors That Control It

IFN-γ is a major cytokine that mediates resistance against the intracellular parasite Toxoplasma gondii. The p65 guanylate-binding proteins (GBPs) are strongly induced by IFN-γ. We studied the behavior of murine GBP1 (mGBP1) upon infection with T. gondii in vitro and confirmed that IFN-γ-dependent re-localization of mGBP1 to the parasitophorous vacuole (PV) correlates with the virulence type of the parasite. We identified three parasitic factors, ROP16, ROP18, and GRA15 that determine strain-specific accumulation of mGBP1 on the PV. These highly polymorphic proteins are held responsible for a large part of the strain-specific differences in virulence. Therefore, our data suggest that virulence of T. gondii in animals may rely in part on recognition by GBPs. However, phagosomes or vacuoles containing Trypanosoma cruzi did not recruit mGBP1. Co-immunoprecipitation revealed mGBP2, mGBP4, and mGBP5 as binding partners of mGBP1. Indeed, mGBP2 and mGBP5 co-localize with mGBP1 in T. gondii-infected cells. T. gondii thus elicits a cell-autonomous immune response in mice with GBPs involved. Three parasitic virulence factors and unknown IFN-γ-dependent host factors regulate this complex process. Depending on the virulence of the strains involved, numerous GBPs are brought to the PV as part of a large, multimeric structure to combat T. gondii.National Institutes of Health (U.S.)Massachusetts Life Sciences Center (New Investigator Award)National Institute of General Medical Sciences (U.S.) (Pre-Doctoral Grant in the Biological Sciences (5-T32-GM007287-33))Studienstiftung des deutschen VolkesCancer Research Institute (New York, N.Y.)Cleo and Paul Schimmel FoundationBayer HealthcareHuman Frontier Science Program (Strasbourg, France

Space plasma physics science opportunities for the lunar orbital platform - Gateway

The Lunar Orbital Platform - Gateway (LOP - Gateway, or simply Gateway) is a crewed platform that will be assembled and operated in the vicinity of the Moon by NASA and international partner organizations, including ESA, starting from the mid-2020s. It will offer new opportunities for fundamental and applied scientific research. The Moon is a unique location to study the deep space plasma environment. Moreover, the lunar surface and the surface-bounded exosphere are interacting with this environment, constituting a complex multi-scale interacting system. This paper examines the opportunities provided by externally mounted payloads on the Gateway in the field of space plasma physics, heliophysics and space weather, and also examines the impact of the space environment on an inhabited platform in the vicinity of the Moon. It then presents the conceptual design of a model payload, required to perform these space plasma measurements and observations. It results that the Gateway is very well-suited for space plasma physics research. It allows a series of scientific objectives with a multi-disciplinary dimension to be addressed

Fundamental questions and applications of sclerochronology: Community-defined research priorities.

Horizon scanning is an increasingly common strategy to identify key research needs and frame future agendas in science. Here, we present the results of the first such exercise for the field of sclerochronology, thereby providing an overview of persistent and emergent research questions that should be addressed by future studies. Through online correspondence following the 5th International Sclerochronology Conference in 2019, participants submitted and rated questions that addressed either knowledge gaps or promising applications of sclerochronology. An initial list of 130 questions was compiled based on contributions of conference attendees and reviewed by expert panels formed during the conference. Herein, we present and discuss the 50 questions rated to be of the highest priority, determined through an online survey distributed to sclerochronology community members post the conference. The final list (1) includes important questions related to mechanisms of biological control over biomineralization, (2) highlights state of the art applications of sclerochronological methods and data for solving long-standing questions in other fields such as climate science and ecology, and (3) emphasizesthe need for common standards for data management and analysis. Although research priorities are continually reassessed, our list provides a roadmap that can be used to motivate research efforts and advance sclerochronology towardnew, and more powerful, applications.N/