55 research outputs found
Recommended from our members
Novel Catalytic Materials for Selective Oxidation of Carbon Monoxide for Use in Fuel Cells
The present work includes the preparation, characterisation and testing of alumina supported Pt-based bimetallic catalysts for the selective removal of carbon monoxide in the presence of excess hydrogen, to be used as the feed stock for fuel cells. In this study, an attempt has been made to modify the Pt/Al203 (low- and high-dispersed) catalyst with Sn, Fe, Co, Cr, Mn, Ni and Cu as promoters using the surface organometallic chemistry (SOMC) route. Various techniques have been employed to characterise the Pt/Al2O3 and the M-Pt/Al2O3 bimetallic catalysts. Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-AES) technique has been used to determine the composition of the promoted catalysts. The presence of the expected amounts of the second metal in the bimetallic catalysts indicated success of the SOMC route for the preparation of the bimetallic catalysts. The CO uptake by bimetallic catalysts has been found to be lower than that
by Pt/AEO] catalyst. Decrease in the CO uptake during CO chemisorption experiments relative to the basic Pt/Al203 catalyst indicates the physical presence of the second metal on the Pt sites suggesting a selective reaction between the reduced
surface Pt of the Pt/Al203 catalyst and the organometallic precursor of the second metal had occurred. The shift in the reduction peaks for the bimetallic catalysts in the Temperature Programmed Reduction (TPR) profile compared with that of
unpromoted catalyst suggested physical proximity of the two metal species in the catalyst. The presence of the two metals together with no observable change in the size of the particles in the bimetallic catalysts has been confirmed by using Transmission Electron Microscopy (TEM/STEM) together with Energy Dispersive X-Ray (EDX) analysis. This was yet another proof of successful deposition of second metal on Pt by the SOMC technique. All the M-Pt/Al203 bimetallic catalysts (low-dispersed) prepared by the SOMC route were screened towards CO oxidation in the presence of excess H2. Out of all the bimetallic catalysts screened, the best performing catalysts were chosen for the detailed study using two different gas mixtures, containing 02:C0 ratios of 2.5 and 1. The most interesting feature of this study was the performance of Fe- and Co-promoted catalysts under different O2:CO ratios. Both the systems, FePt and CoPt, brought the temperature for the complete CO oxidation down to the temperature range of 80 - 100 °C which is highly preferred for the commercial applications, while maintaining the high value of CO selectivity. The enhanced activity of the promoted Pt catalysts was suggested to be due to the presence of a metal oxide, MOx (M = Fe and Co) which provides the site for O2 absorption and dissociation and therefore eliminates the normal inhibition observed in the oxidation of CO on Pt catalysts
An Overview on Phyto-molecules and Screening Method of Antiurolithiatic Activity
Kidney stones are one of the oldest known and common diseases in the urinary tract system. Kidney stones are a growing global problem. It is also known as Urolithiasis. Lithiasis is a condition where urinary calculus is formed in the kidney and urinary tract. It is a complicated urinary disorder that has gravely troubled the health and quality of human life. It has been associated with an increased risk of end-stage renal failure. Urinary stones affect 10-12% of the population in industrialized countries. There are only a few geographical areas in which the stone disease is rare, e.g., Germany and in the coastal areas of Japan. The etiology of kidney stone is multifactorial. The most common type of kidney stone is calcium oxalate formed at Randallâs plaque on the renal papillary surfaces. The mechanism of stone formation is a complex process which results from several physicochemical events including supersaturation, nucleation, growth, aggregation and retention of urinary stone constituents within tubular cells. These steps are modulated by an imbalance between factors that promote or inhibit urinary crystallization. Currently, there is no satisfactory drug to cure and/or prevent kidney stone recurrences. Conventional agents are being used to control kidney stone along with lifestyle management. Medicinal plants are found to be useful in this metabolic disorder from ancient days due to its no or low-toxic nature, easily available in rural areas, cheap; there are fewer chances of recurrence. Thus, further understanding of the pathophysiology of kidney stone formation is a research area to manage urolithiasis using new drugs. Therefore, this review has intended to provide compiled up-to-date information on kidney stone etiology, pathogenesis and prevention approaches and critically review the available literature on various medicinal plants with their antilithiatic activity and screening method of this activity to develop an effective drug to treat the disease.
Keywords: Kidney stones, Urolithiasis, Etiology, Calcium oxalate, Pathophysiology, Medicinal plant
Spintronics: Combination of Nanotechnology & Superconductivity
Advances in fabrication & characterization of magnetic & superconductivity materials on nanometre length scales paves the way for new experimental, theoretical & technological frontiers. This paper emphasize on âspintronicsâ: it is a nanoscale technology in which information is carried not by the electonâs charge, as it is in conventional microchips, but by the electronâs intrinsic spin, by controlling the spin degree of freedom in solid â state heterostructures & magnetic quantum dots, Spintronics offers new possibilities for developing data processing speeds, lower electric consumption & the ability to carry out radically new quantum computations over conventional electronics. Spintronics a prototype device that is already in use in industry as a read head & a memory âstorage cell is the giant â magneto resistive (GMR) sandwich structure which consists of alternating ferromagnetic & non-magnetic metal layers. Experimental work is reviewed with the emphasis on the fundamentals & application in which external electric & magnetic field will be used to control spin & charge dynamics to create new functionalities which are ineffective with conventional electronics. Key Words: spintronics, superconductivity, giant â magneto resistive (GMR), magnetic field, heterostructures, conventional electronics etc
Formulation, Development and Evaluation of Fast Dissolving Oral Film of Antidepressant Drug
see PD
Preparation of mupirocin-loaded polymeric nanocapsules using essential oil of rosemary
A genome-scale integrated approach aids in genetic dissection of complex flowering time trait in chickpea
A combinatorial approach of candidate gene-based association analysis and genome-wide association study (GWAS) integrated with QTL mapping, differential gene expression profiling and molecular haplotyping was deployed in the present study for quantitative dissection of complex flowering time trait in chickpea. Candidate gene-based association mapping in a flowering time association panel (92 diverse desi and kabuli accessions) was performed by employing the genotyping information of 5724 SNPs discovered from 82 known flowering chickpea gene orthologs of Arabidopsis and legumes as well as 832 gene-encoding transcripts that are differentially expressed during flower development in chickpea. GWAS using both genome-wide GBS- and candidate gene-based genotyping data of 30,129 SNPs in a structured population of 92 sequenced accessions (with 200â250 kb LD decay) detected eight maximum effect genomic SNP loci (genes) associated (34 % combined PVE) with flowering time. Six flowering time-associated major genomic loci harbouring five robust QTLs mapped on a high-resolution intra-specific genetic linkage map were validated (11.6â27.3 % PVE at 5.4â11.7 LOD) further by traditional QTL mapping. The flower-specific expression, including differential up- and down-regulation (>three folds) of eight flowering time-associated genes (including six genes validated by QTL mapping) especially in early flowering than late flowering contrasting chickpea accessions/mapping individuals during flower development was evident. The gene haplotype-based LD mapping discovered diverse novel natural allelic variants and haplotypes in eight genes with high trait association potential (41 % combined PVE) for flowering time differentiation in cultivated and wild chickpea. Taken together, eight potential known/candidate flowering time-regulating genes [efl1 (early flowering 1), FLD (Flowering locus D), GI (GIGANTEA), Myb (Myeloblastosis), SFH3 (SEC14-like 3), bZIP (basic-leucine zipper), bHLH (basic helix-loop-helix) and SBP (SQUAMOSA promoter binding protein)], including novel markers, QTLs, alleles and haplotypes delineated by aforesaid genome-wide integrated approach have potential for marker-assisted genetic improvement and unravelling the domestication pattern of flowering time in chickpea
The global, regional, and national burden of oesophageal cancer and its attributable risk factors in 195 countries and territories, 1990-2017: A systematic analysis for the global burden of disease study 2017
© 2020 The Author(s). Background Oesophageal cancer is a common and often fatal cancer that has two main histological subtypes: oesophageal squamous cell carcinoma and oesophageal adenocarcinoma. Updated statistics on the incidence and mortality of oesophageal cancer, and on the disability-adjusted life-years (DALYs) caused by the disease, can assist policy makers in allocating resources for prevention, treatment, and care of oesophageal cancer. We report the latest estimates of these statistics for 195 countries and territories between 1990 and 2017, by age, sex, and Socio-demographic Index (SDI), using data from the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD). Methods We used data from vital registration systems, vital registration-samples, verbal autopsy records, and cancer registries, combined with relevant modelling, to estimate the mortality, incidence, and burden of oesophageal cancer from 1990 to 2017. Mortality-to-incidence ratios (MIRs) were estimated and fed into a Cause of Death Ensemble model (CODEm) including risk factors. MIRs were used for mortality and non-fatal modelling. Estimates of DALYs attributable to the main risk factors of oesophageal cancer available in GBD were also calculated. The proportion of oesophageal squamous cell carcinoma to all oesophageal cancers was extracted by use of publicly available data, and its variation was examined against SDI, the Healthcare Access and Quality (HAQ) Index, and available risk factors in GBD that are specific for oesophageal squamous cell carcinoma (eg, unimproved water source and indoor air pollution) and for oesophageal adenocarcinoma (gastro-oesophageal reflux disease). Findings There were 473 000 (95% uncertainty interval [95% UI] 459 000-485 000) new cases of oesophageal cancer and 436 000 (425 000-448 000) deaths due to oesophageal cancer in 2017. Age-standardised incidence was 5.9 (5.7-6.1) per 100 000 population and age-standardised mortality was 5.5 (5.3-5.6) per 100 000. Oesophageal cancer caused 9.78 million (9.53-10.03) DALYs, with an age-standardised rate of 120 (117-123) per 100 000 population. Between 1990 and 2017, age-standardised incidence decreased by 22.0% (18.6-25.2), mortality decreased by 29.0% (25.8-32.0), and DALYs decreased by 33.4% (30.4-36.1) globally. However, as a result of population growth and ageing, the total number of new cases increased by 52.3% (45.9-58.9), from 310 000 (300 000-322 000) to 473 000 (459 000-485 000); the number of deaths increased by 40.0% (34.1-46.3), from 311 000 (301 000-323 000) to 436 000 (425 000-448 000); and total DALYs increased by 27.4% (22.1-33.1), from 7.68 million (7.42-7.97) to 9.78 million (9.53-10.03). At the national level, China had the highest number of incident cases (235 000 [223 000-246 000]), deaths (213 000 [203 000-223 000]), and DALYs (4.46 million [4.25-4.69]) in 2017. The highest national-level agestandardised incidence rates in 2017 were observed in Malawi (23.0 [19.4-26.5] per 100 000 population) and Mongolia (18.5 [16.4-20.8] per 100 000). In 2017, age-standardised incidence was 2.7 times higher, mortality 2.9 times higher, and DALYs 3.0 times higher in males than in females. In 2017, a substantial proportion of oesophageal cancer DALYs were attributable to known risk factors: tobacco smoking (39.0% [35.5-42.2]), alcohol consumption (33.8% [27.3-39.9]), high BMI (19.5% [6.3-36.0]), a diet low in fruits (19.1% [4.2-34.6]), and use of chewing tobacco (7.5% [5.2-9.6]). Countries with a low SDI and HAQ Index and high levels of indoor air pollution had a higher proportion of oesophageal squamous cell carcinoma to all oesophageal cancer cases than did countries with a high SDI and HAQ Index and with low levels of indoor air pollution. Interpretation Despite reductions in age-standardised incidence and mortality rates, oesophageal cancer remains a major cause of cancer mortality and burden across the world. Oesophageal cancer is a highly fatal disease, requiring increased primary prevention efforts and, possibly, screening in some high-risk areas. Substantial variation exists in age-standardised incidence rates across regions and countries, for reasons that are unclear
Spatial, temporal, and demographic patterns in prevalence of chewing tobacco use in 204 countries and territories, 1990-2019 : a systematic analysis from the Global Burden of Disease Study 2019
Interpretation Chewing tobacco remains a substantial public health problem in several regions of the world, and predominantly in south Asia. We found little change in the prevalence of chewing tobacco use between 1990 and 2019, and that control efforts have had much larger effects on the prevalence of smoking tobacco use than on chewing tobacco use in some countries. Mitigating the health effects of chewing tobacco requires stronger regulations and policies that specifically target use of chewing tobacco, especially in countries with high prevalence. Findings In 2019, 273 center dot 9 million (95% uncertainty interval 258 center dot 5 to 290 center dot 9) people aged 15 years and older used chewing tobacco, and the global age-standardised prevalence of chewing tobacco use was 4 center dot 72% (4 center dot 46 to 5 center dot 01). 228 center dot 2 million (213 center dot 6 to 244 center dot 7; 83 center dot 29% [82 center dot 15 to 84 center dot 42]) chewing tobacco users lived in the south Asia region. Prevalence among young people aged 15-19 years was over 10% in seven locations in 2019. Although global agestandardised prevalence of smoking tobacco use decreased significantly between 1990 and 2019 (annualised rate of change: -1 center dot 21% [-1 center dot 26 to -1 center dot 16]), similar progress was not observed for chewing tobacco (0 center dot 46% [0 center dot 13 to 0 center dot 79]). Among the 12 highest prevalence countries (Bangladesh, Bhutan, Cambodia, India, Madagascar, Marshall Islands, Myanmar, Nepal, Pakistan, Palau, Sri Lanka, and Yemen), only Yemen had a significant decrease in the prevalence of chewing tobacco use, which was among males between 1990 and 2019 (-0 center dot 94% [-1 center dot 72 to -0 center dot 14]), compared with nine of 12 countries that had significant decreases in the prevalence of smoking tobacco. Among females, none of these 12 countries had significant decreases in prevalence of chewing tobacco use, whereas seven of 12 countries had a significant decrease in the prevalence of tobacco smoking use for the period. Summary Background Chewing tobacco and other types of smokeless tobacco use have had less attention from the global health community than smoked tobacco use. However, the practice is popular in many parts of the world and has been linked to several adverse health outcomes. Understanding trends in prevalence with age, over time, and by location and sex is important for policy setting and in relation to monitoring and assessing commitment to the WHO Framework Convention on Tobacco Control. Methods We estimated prevalence of chewing tobacco use as part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2019 using a modelling strategy that used information on multiple types of smokeless tobacco products. We generated a time series of prevalence of chewing tobacco use among individuals aged 15 years and older from 1990 to 2019 in 204 countries and territories, including age-sex specific estimates. We also compared these trends to those of smoked tobacco over the same time period. Findings In 2019, 273 & middot;9 million (95% uncertainty interval 258 & middot;5 to 290 & middot;9) people aged 15 years and older used chewing tobacco, and the global age-standardised prevalence of chewing tobacco use was 4 & middot;72% (4 & middot;46 to 5 & middot;01). 228 & middot;2 million (213 & middot;6 to 244 & middot;7; 83 & middot;29% [82 & middot;15 to 84 & middot;42]) chewing tobacco users lived in the south Asia region. Prevalence among young people aged 15-19 years was over 10% in seven locations in 2019. Although global age standardised prevalence of smoking tobacco use decreased significantly between 1990 and 2019 (annualised rate of change: -1 & middot;21% [-1 & middot;26 to -1 & middot;16]), similar progress was not observed for chewing tobacco (0 & middot;46% [0 & middot;13 to 0 & middot;79]). Among the 12 highest prevalence countries (Bangladesh, Bhutan, Cambodia, India, Madagascar, Marshall Islands, Myanmar, Nepal, Pakistan, Palau, Sri Lanka, and Yemen), only Yemen had a significant decrease in the prevalence of chewing tobacco use, which was among males between 1990 and 2019 (-0 & middot;94% [-1 & middot;72 to -0 & middot;14]), compared with nine of 12 countries that had significant decreases in the prevalence of smoking tobacco. Among females, none of these 12 countries had significant decreases in prevalence of chewing tobacco use, whereas seven of 12 countries had a significant decrease in the prevalence of tobacco smoking use for the period. Interpretation Chewing tobacco remains a substantial public health problem in several regions of the world, and predominantly in south Asia. We found little change in the prevalence of chewing tobacco use between 1990 and 2019, and that control efforts have had much larger effects on the prevalence of smoking tobacco use than on chewing tobacco use in some countries. Mitigating the health effects of chewing tobacco requires stronger regulations and policies that specifically target use of chewing tobacco, especially in countries with high prevalence. Copyright (c) 2021 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.Peer reviewe
Spatial, temporal, and demographic patterns in prevalence of smoking tobacco use and attributable disease burden in 204 countries and territories, 1990-2019 : a systematic analysis from the Global Burden of Disease Study 2019
Background Ending the global tobacco epidemic is a defining challenge in global health. Timely and comprehensive estimates of the prevalence of smoking tobacco use and attributable disease burden are needed to guide tobacco control efforts nationally and globally. Methods We estimated the prevalence of smoking tobacco use and attributable disease burden for 204 countries and territories, by age and sex, from 1990 to 2019 as part of the Global Burden of Diseases, Injuries, and Risk Factors Study. We modelled multiple smoking-related indicators from 3625 nationally representative surveys. We completed systematic reviews and did Bayesian meta-regressions for 36 causally linked health outcomes to estimate non-linear dose-response risk curves for current and former smokers. We used a direct estimation approach to estimate attributable burden, providing more comprehensive estimates of the health effects of smoking than previously available. Findings Globally in 2019, 1.14 billion (95% uncertainty interval 1.13-1.16) individuals were current smokers, who consumed 7.41 trillion (7.11-7.74) cigarette-equivalents of tobacco in 2019. Although prevalence of smoking had decreased significantly since 1990 among both males (27.5% [26. 5-28.5] reduction) and females (37.7% [35.4-39.9] reduction) aged 15 years and older, population growth has led to a significant increase in the total number of smokers from 0.99 billion (0.98-1.00) in 1990. Globally in 2019, smoking tobacco use accounted for 7.69 million (7.16-8.20) deaths and 200 million (185-214) disability-adjusted life-years, and was the leading risk factor for death among males (20.2% [19.3-21.1] of male deaths). 6.68 million [86.9%] of 7.69 million deaths attributable to smoking tobacco use were among current smokers. Interpretation In the absence of intervention, the annual toll of 7.69 million deaths and 200 million disability-adjusted life-years attributable to smoking will increase over the coming decades. Substantial progress in reducing the prevalence of smoking tobacco use has been observed in countries from all regions and at all stages of development, but a large implementation gap remains for tobacco control. Countries have a dear and urgent opportunity to pass strong, evidence-based policies to accelerate reductions in the prevalence of smoking and reap massive health benefits for their citizens. Copyright (C) 2021 The Author(s). Published by Elsevier Ltd.Peer reviewe
BLOOM: A 176B-Parameter Open-Access Multilingual Language Model
Large language models (LLMs) have been shown to be able to perform new tasks
based on a few demonstrations or natural language instructions. While these
capabilities have led to widespread adoption, most LLMs are developed by
resource-rich organizations and are frequently kept from the public. As a step
towards democratizing this powerful technology, we present BLOOM, a
176B-parameter open-access language model designed and built thanks to a
collaboration of hundreds of researchers. BLOOM is a decoder-only Transformer
language model that was trained on the ROOTS corpus, a dataset comprising
hundreds of sources in 46 natural and 13 programming languages (59 in total).
We find that BLOOM achieves competitive performance on a wide variety of
benchmarks, with stronger results after undergoing multitask prompted
finetuning. To facilitate future research and applications using LLMs, we
publicly release our models and code under the Responsible AI License
- âŠ