32 research outputs found
Flight Results of the InflateSail Spacecraft and Future Applications of DragSails
The InflateSail CubeSat, designed and built at the Surrey Space Centre (SSC) at the University of Surrey, UK, for the Von Karman Institute (VKI), Belgium, is one of the technology demonstrators for the QB50 programme. The 3.2 kilogram InflateSail is â3Uâ in size and is equipped with a 1 metre long inflatable boom and a 10 square metre deployable drag sail. InflateSail\u27s primary goal is to demonstrate the effectiveness of using a drag sail in Low Earth Orbit (LEO) to dramatically increase the rate at which satellites lose altitude and re-enter the Earth\u27s atmosphere. InflateSail was launched on Friday 23rd June 2017 into a 505km Sun-synchronous orbit. Shortly after the satellite was inserted into its orbit, the satellite booted up and automatically started its successful deployment sequence and quickly started its decent. The spacecraft exhibited varying dynamic modes, capturing in-situ attitude data throughout the mission lifetime. The InflateSail spacecraft re-entered 72 days after launch. This paper describes the spacecraft and payload, and analyses the effect of payload deployment on its orbital trajectory. The boom/drag-sail technology developed by SSC will next be used on the RemoveDebris mission, which will demonstrate the applicability of the system to microsat deorbiting
Remove Debris Mission, From Concept to Orbit
The RemoveDebris mission will be the first European Active Debris Removal (ADR) missions to give an in orbit demonstration of the viability of a series of cost effective technologies that can be used to observe, capture and destroy space debris. RemoveDebris is a low cost mission performing key active debris removal (ADR) technology demonstrations including the use of a net, a harpoon, vision-based navigation (VBN) and a dragsail in a realistic space operational environment. For the purposes of the mission two CubeSats will be ejected and used as targets for experiments instead of real space debris, which is an important step towards a fully operational ADR mission. The craft has launched to the ISS on the 2nd of April 2018, on board a Dragon capsule (SpaceX CRS-14 ISS re-supply mission). From here the satellite is to be deployed via the NanoRacks Kaber system into an orbit of around 400 km. Aglietti 2 32nd Annual AIAA/USU Conference on Small Satellites This paper examines the design of the mission from initial concepts through to manufacture, AIT, testing and up to launch, and apart from a general consideration of the mission, will focus on the elements of design & testing that differ from a conventional mission
Lyophilisation of influenza, rabies and Marburg lentiviral pseudotype viruses for the development and distribution of a neutralisation-assay based diagnostic kit
Pseudotype viruses (PVs) are chimeric, replication-deficient virions that mimic wild-type virus entry mechanisms and can be safely employed in neutralisation assays, bypassing the need for high biosafety requirements and performing comparably to established serological assays. However, PV supernatant necessitates -80°C long-term storage and cold-chain maintenance during transport, which limits the scope of dissemination and application throughout resource-limited laboratories. We therefore investigated the effects of lyophilisation on influenza, rabies and Marburg PV stability, with a view to developing a pseudotype virus neutralisation assay (PVNA) based kit suitable for affordable global distribution. Infectivity of each PV was calculated after lyophilisation and immediate reconstitution, as well as subsequent to incubation of freeze-dried pellets at varying temperatures, humidities and timepoints. Integrity of glycoprotein structure following treatment was also assessed by employing lyophilised PVs in downstream PVNAs. In the presence of 0.5M sucrose-PBS cryoprotectant, each freeze-dried pseudotype was stably stored for 4 weeks at up to 37°C and could be neutralised to the same potency as unlyophilised PVs when employed in PVNAs. These results confirm the viability of a freeze-dried PVNA-based kit, which could significantly facilitate low-cost serology for a wide portfolio of emerging infectious viruses
The InflateSail CubeSat Mission:The First European Demonstration of Drag-Sail De-Orbiting
The InflateSail (QB50-UK06) CubeSat, designed and built at the Surrey Space Centre (SSC) at the University of Surrey, UK, for the Von Karman Institute (VKI), Belgium â was one of the technology demonstrators for the QB50 pro-gramme. The 3.2 kilogram 3U CubeSat was equipped with a 1 metre long inflat-able boom and a 10m2 deployable drag sail. InflateSail's primary mission was to demonstrate the effectiveness of using a drag sail in Low Earth Orbit (LEO) to dramatically increase the rate at which satellites lose altitude and re-enter the Earth's atmosphere and it was one of 31 satellites that were launched simultane-ously on the PSLV (polar satellite launch vehicle) C-38 from Sriharikota, India on 23rd June 2017 into a 505km, 97.44o Sun-synchronous orbit (SSO). Shortly after orbital insertion, InflateSail booted-up, and, once safely clear of the other satellites on the launch, it automatically activated its payload â firstly, deploying a 1 metre long inflatable boom comprising a metal-polymer laminate tube, using a cool gas generator (CGG) to provide the inflation gas, and secondly, using a brushless DC motor at the end of the boom to extend four lightweight bistable rigid composite (BRC) booms to draw out the 3.1m x 3.1m square, 12 micron thick polymer drag-sail. As intended, the satellite immediately began to lose alti-tude, and re-entered the atmosphere just 72 days later â thus demonstrating for the first time the de-orbiting of a spacecraft using European inflatable and drag-sail technologies. The boom/drag-sail technology developed by SSC will next be used on the RemoveDebris mission, due for launch in 2018, which will demon-strate the capturing and de-orbiting of artificial space debris targets using a net and harpoon system
InflateSail de-orbit flight demonstration results and follow-on drag-sail applications
The InflateSail (QB50-UK06) CubeSat, designed and built at the Surrey Space Centre (SSC) for the Von Karman
Institute (VKI), Belgium, was one of the technology demonstrators for the European Commissionâs QB50
programme. The 3.2 kg 3U CubeSat was equipped with a 1 metre long inflatable mast and a 10m2
deployable drag
sail. InflateSail's primary mission was to demonstrate the effectiveness of using a drag sail in Low Earth Orbit (LEO)
to dramatically increase the rate at which satellites lose altitude and re-enter the Earth's atmosphere and it was one of
31 satellites that were launched simultaneously on the PSLV (polar satellite launch vehicle) C-38 from Sriharikota,
India on 23rd June 2017 into a 505km, 97.44o
Sun-synchronous orbit.
Shortly after safe deployment in orbit, InflateSail automatically activated its payload. Firstly, it inflated its metrelong
metal-polymer laminate tubular mast, and then activated a stepper motor to extend four lightweight bi-stable
rigid composite (BRC) booms from the end of the mast, so as to draw out the 3.1m x 3.1m square, 12m thick
polyethylene naphthalate (PEN) drag-sail. As intended, the satellite immediately began to lose altitude, causing it to
re-enter the atmosphere just 72 days later â thus successfully demonstrating for the first time the de-orbiting of a
spacecraft using European inflatable and drag-sail technologies.
The InflateSail project was funded by two European Commission Framework Program Seven (FP7) projects:
DEPLOYTECH and QB50. DEPLOYTECH had eight European partners including DLR, Airbus France, RolaTube,
Cambridge University, and was assisted by NASA Marshall Space Flight Center. DEPLOYTECHâs objectives were
to advance the technological capabilities of three different space deployable technologies by qualifying their
concepts for space use. QB50 was a programme, led by VKI, for launching a network of 50 CubeSats built mainly by
university teams all over the world to perform first-class science in the largely unexplored lower thermosphere.
The boom/drag-sail technology developed by SSC will next be used on a third FP7 Project: RemoveDebris,
launched in 2018, which will demonstrate the capturing and de-orbiting of artificial space debris targets using a net
and harpoon system. This paper describes the results of the InflateSail mission, including the observed effects of
atmospheric density and solar activity on its trajectory and body dynamics. It also describes the application of the
technology to RemoveDebris and its potential as a commercial de-orbiting add-on package for future space missions
Global urban environmental change drives adaptation in white clover
Urbanization transforms environments in ways that alter biological evolution. We examined whether urban environmental change drives parallel evolution by sampling 110,019 white clover plants from 6169 populations in 160 cities globally. Plants were assayed for a Mendelian antiherbivore defense that also affects tolerance to abiotic stressors. Urban-rural gradients were associated with the evolution of clines in defense in 47% of cities throughout the world. Variation in the strength of clines was explained by environmental changes in drought stress and vegetation cover that varied among cities. Sequencing 2074 genomes from 26 cities revealed that the evolution of urban-rural clines was best explained by adaptive evolution, but the degree of parallel adaptation varied among cities. Our results demonstrate that urbanization leads to adaptation at a global scale
Flight Results of the InflateSail Spacecraft and Future Applications of Drag Sails
The InflateSail CubeSat, designed and built at the Surrey Space Centre (SSC) at the University of Surrey, UK, for the Von Karman Institute (VKI), Belgium, is one of the technology demonstrators for the QB50 programme. The 3.2 kilogram InflateSail is â3Uâ in size and is equipped with a 1 metre long inflatable boom and a 10 square metre deployable drag sail.
InflateSail's primary goal is to demonstrate the effectiveness of using a drag sail in Low Earth Orbit (LEO) to dramatically increase the rate at which satellites lose altitude and re-enter the Earth's atmosphere. InflateSail was launched on Friday 23rd June 2017 into a 505km Sun-synchronous orbit. Shortly after the satellite was inserted into its orbit, the satellite booted up and automatically started its successful deployment sequence and quickly started its decent. The spacecraft exhibited varying dynamic modes, capturing in-situ attitude data throughout the mission lifetime. The InflateSail spacecraft re-entered 72 days after launch.
This paper describes the spacecraft and payload, and analyses the effect of payload deployment on its orbital trajectory. The boom/drag-sail technology developed by SSC will next be used on the RemoveDebris mission, which will demonstrate the applicability of the system to microsat deorbiting
The active space debris removal mission RemoveDebris. Part 1: from concept to launch
International audienc