Preliminary data set to assess the performance of an outdoor membrane photobioreactor

[EN] This data in brief (DIB) article is related to a Research article entitled 'Optimising an outdoor membrane photobioreactor for tertiary sewage treatment' [1]. Data related to the effect of substrate turbidity, the ammonium concentration at which the culture reaches nitrogen-deplete conditions and the microalgae growth rate under outdoor conditions is provided. Microalgae growth rates under different substrate turbidity were obtained to assess the reduction of the culture's light availability. Lab-scale experiments showed growth rates reductions of 22-44%. Respirometric tests were carried to know the limiting ammonium concentration in thismicroalgae-basedwastewater treatment system. Growth rates (m) of green microalgae Scenedesmus and Chlorella obtained under outdoor conditions; i.e. 0.40 d(-1) (R-2 = 0.993) and 0.43 d(-1) (R-2 = 0.995), respectively, can be useful to obtain optimum operating conditions of membrane photobioreactor (MPBR).This research work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO, Projects CTM2014-54980-C2-1-R and CTM2014-54980-C2-2-R) jointly with the European Regional Development Fund (ERDF), which are gratefully acknowledged. It also received support from the Spanish Ministry of Education, Culture and Sport via a pre-doctoral FPU fellowship to the first author (FPU14/05082).Gonzalez-Camejo, J.; Jiménez Benítez, AL.; Ruano, MV.; Robles Martínez, Á.; Barat, R.; Ferrer, J. (2019). Preliminary data set to assess the performance of an outdoor membrane photobioreactor. Data in Brief. 27:1-7. https://doi.org/10.1016/j.dib.2019.104599S172

Efficacy of different antifouling treatments for seawater cooling systems

In an industrial seawater cooling system, the effects of three different antifouling treatments, viz. sodium hypochlorite (NaClO), aliphatic amines (Mexel1432) and UV radiation, on the characteristics of the fouling formed were evaluated. For this study a portable pilot plant, as a side-stream monitoring system and seawater cooling system, was employed. The pilot plant simulated a power plant steam condenser, having four titanium tubes under different treatment patterns, where fouling progression could be monitored. The nature of the fouling obtained was chiefly inorganic, showing a clear dependence on the antifouling treatment employed. After 72 days the tubes under treatment showed a reduction in the heat transfer resistance (R) of around 70% for NaClO, 48% for aliphatic amines and 55% for UV, with respect to the untreated tube. The use of a logistic model was very useful for predicting the fouling progression and the maximum asymptotic value of the increment in the heat transfer resistance (DRmax). The apparent thermal conductivity (l) of the fouling layer showed a direct relationship with the percentage of organic matter in the collected fouling. The characteristics and mode of action of the different treatments used led to fouling with diverse physicochemical properties

Anaerobic biodegradation of oleic and palmitic acids : evidence of mass transfer limitations caused by long chain fatty acid accumulation onto the anaerobic sludge

Palmitic acid was the main long chain fatty acids (LCFA) that accumulated onto the anaerobic sludge when oleic acid was fed to an EGSB reactor. The conversion between oleic and palmitic acid was linked to the biological activity. When palmitic acid was fed to an EGSB reactor it represented also the main LCFA that accumulated onto the sludge. The way of palmitic acid accumulation was different in the oleic and in the palmitic acid fed reactors.Whenoleic acid was fed, the biomass-associated LCFA (83% as palmitic acid) were mainly adsorbed and entrapped in the sludge that became ‘‘encapsulated’’ by an LCFA layer. However, when palmitic acid was fed, the biomass-associated LCFA (the totality as palmitic acid) was mainly precipitated in white spots like precipitates in between the sludge, which remained ‘‘non-encapsulated.’’ The two sludges were compared in terms of the specific methanogenic activity (SMA) in the presence of acetate, propionate, butyrate, and H2CO2, before and after the mineralization of similar amounts of biomassassociated LCFA (4.6 and 5.2 g COD-LCFA/g of volatile suspended solids (VSS), for the oleic and palmitic acid fed sludge, respectively). The ‘‘non-encapsulated,’’ sludge exhibited a considerable initial methanogenic activity on all the tested substrates, with the single exception of butyrate. However, with the ‘‘encapsulated’’ sludge only methane production from ethanol andH2/CO2 was detected, after a lag phase of about 50 h. After mineralization of the biomass-associated LCFA, both sludges exhibited activities of similar order of magnitude in the presence of the same individual substrates and significantly higher than before. The results evidenced that LCFA accumulation onto the sludge can create a physical barrier and hinder the transfer of substrates and products, inducing a delay on the initial methane production. Whatever the mechanism, metabolic or physical, that is behind this inhibition, it is reversible, being eliminated after the depletion of the biomass-associated LCFA.Fundação para a Ciência e Tecnologia (FCT) Fundo Social Europeu (FSE

Sodium dodecyl sulfate allows the persistence and recovery of biofilms of Pseudomonas fluorescens formed under different hydrodynamic conditions

The effect of the anionic surfactant sodium dodecyl sulfate (SDS) on Pseudomonas fluorescens biofilms was investigated using flow cell reactors with stainless steel substrata, under turbulent (Re=5200) and laminar (Re=2000) flow. Steady-state biofilms were exposed to SDS in single doses (0.5, 1, 3 and 7 mM) and biofilm respiratory activity and mass measured at 0, 3, 7 and 12 h after the SDS application. The effect of SDS on biofilm mechanical stability was assessed using a rotating bioreactor. Whilst high concentrations (7 mM) of SDS promoted significant biofilm inactivation, it did not significantly reduce biofouling. Turbulent and laminar flow-generated biofilms had comparable susceptibility to SDS application. Following SDS exposure, biofilms rapidly recovered over the following 12 h, achieving higher respiratory activity values than before treatment. This phenomenon of posttreatment recovery was more pronounced for turbulent flow-generated biofilms, with an increase in SDS concentration. The mechanical stability of the biofilms increased with surfactant application, except for SDS concentrations near the critical micellar concentration, as measured by biofilm removal due to an increase in external shear stress forces. The data suggest that although SDS exerts antimicrobial action against P. fluorescens biofilms, even if only partial and reversible, it had only limited antifouling efficacy, increasing biofilm mechanical stability at low concentrations and allowing significant and rapid recovery of turbulent flow-generated biofilms.Fundação para a Ciência e a Tecnologia (FCT

Phycoremediation of municipal wastewater by microalgae to produce biofuel

Municipal wastewater (WW), if not properly remediated, poses a threat to the environment and human health by carrying significant loads of nutrients and pathogens. These contaminants pollute rivers, lakes and natural reservoirs where they cause eutrophication and pathogen-mediated diseases. However, the high nutrient content of WW makes it an ideal environment for remediation with microalgae that require high nutrient concentrations for growth and are not susceptible to toxins and pathogens. Given that an appropriate algal strain is used for remediation, the incurred biomass can be refined for the production of biofuel. Four microalgal species (Chlamydomonas reinhardtii, Chlorella sp., Parachlorella kessleri-I and Nannochloropsis gaditana) were screened for efficient phycoremediation of municipal WW and potential use for biodiesel production. Among the four strains tested, P. kessleri-I showed the highest growth rate and biomass production in 100% WW. It efficiently removed all major nutrients with a removal rate of up to 98% for phosphate after ten days of growth in 100% municipal WW collected from Delhi. The growth of P. kessleri-I in WW resulted in a 50% increase of biomass and a 115% increase of lipid content in comparison to growth in control media. The FAME and fuel properties of lipids isolated from cells grown in WW complied with international standards. The present study provides evidence that the green alga P. kessleri-I effectively remediates municipal WW and can be used to produce biodiesel

The effect of the introduction of Nile tilapia ( Oreochromis niloticus , L.) on small indigenous fish species (mola, Amblypharyngodon mola , Hamilton; chela, Chela cachius , Hamilton; punti, Puntius sophore , Hamilton)

This is the first controlled experiment to quantify the effect of introduced tilapia on indigenous species. This experiment was conducted in small earthen ponds (100 m 2 ) to assess the impact of mixed-sex or all-male Nile tilapia ( Oreochromis niloticus ) on small indigenous species (SIS) commonly found in south Asia, mola ( Amblypharyngodon mola ), chela ( Chela cachius ) and punti ( Puntius sophore ). Ponds were fertilized, then stocked with 0.56 fish m −2 of water surface area in the mixed-sex and all-male tilapia treatments and 0.42 fish m −2 in the treatment without tilapia. No additional nutritional inputs were applied after stocking. Treatments were: mixed-sex tilapia with SIS, mono-sex male tilapia with SIS and SIS without tilapia (control). All treatments were stocked with 14 fish per species. All species reproduced during the 21-month culture duration. The number of recruits varied by species, Tilapia reproduced in greater numbers than SIS. Tilapia numbers at harvest were the highest (451 ± 25/100 m 2 ) in the mixed-sex treatment compared with mola (221 ± 22/100 m 2 ), chela (94 ± 8/100 m 2 ) and punti (100 ± 7/100 m 2 ). The number of mola was higher (399 ± 33/100 m 2 ) in the all-male tilapia treatment. There was reduction in the number of mola and chela in the treatment containing mixed-sex tilapia. Gut content analysis combined with water sampling revealed that all fish species fed selectively. Significant interspecies dietary overlap was found between Nile tilapia and SIS and among SIS. Thus, there is potential for tilapia to compete with indigenous fish species when space and other resources are limiting, but a longer duration study with varying level of management is needed to determine how successfully tilapia competes with locally adapted SIS.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/79201/1/j.1365-2109.2009.02372.x.pd

Fed-batch fermentation of olive mill wastewaters for lipase production

In the Mediterranean basin countries, huge amounts of olive mill wastewaters (OMW) are produced by the olive oil industry. It constitutes a serious environmental problem, nevertheless its composition turns OMW into a potential growth medium to lipolytic microorganisms. The aim of this work was to study lipase production as well as OMW degradation in fed-batch cultures of Candida cylindracea CBS 7869, Candida rugosa CBS 2275 and Yarrowia lipolytica W29 (ATCC 20460). Besides the improvement of lipase production, the fed-batch approach enhanced the effluent degradation, since it led to good COD and lipids reduction, both higher than 50%. C. rugosa achieved the highest value of lipase productivity (130 U L−1 h−1), in parallel with highest lipids reduction (77%). This study demonstrates thatOMWare becoming a competitive and valuable growth medium in fermentation processes with lipolytic microorganisms. The fed-batch strategy used proved to be an efficient approach to enhance lipase production from OMW and to reduce significantly the final organic load of the medium.The authors acknowledge the financial support provided by 'Fundacao para a Ciencia e Tecnologia' (Project PTDC/AMB/69379/2006; Grant SFRH/BD/27915/2006)

Advanced monitoring of high-rate anaerobic reactors through quantitative image analysis of granular sludge and multivariate statistical analysis

Four organic loading disturbances were performed in lab-scale EGSB reactors fed with ethanol. In load disturbance 1 (LD1) and 2 (LD2), the organic loading rate (OLR) was increased between 5 and 18.5 kg COD m-3 day-1, through the influent ethanol concentration increase, and the hydraulic retention time decrease from 7.8 to 2.5 h, respectively. Load disturbances 3 (LD3) and 4 (LD4) were applied by increasing the OLR to 50 kg COD m-3 day-1 during 3 days and 16 days, respectively. The granular sludge morphology was quantified by image analysis and was related to the reactor performance, including effluent volatile suspended solids, indicator of washout events. In general, it was observed the selective washout of filamentous forms associated to granules erosion/fragmentation and to a decrease in the specific acetoclastic activity. These phenomena induced the transitory deterioration of reactor performance in LD2, LD3, and LD4, but not in LD1. Extending the exposure time in LD4 promoted acetogenesis inhibition after 144 h. The application of Principal Components Analysis determined a latent variable that encompasses a weighted sum of performance, physiological and morphological information. This new variable was highly sensitive to reactor efficiency deterioration, enclosing variations between 27% and 268% in the first hours of disturbances. The high loadings raised by image analysis parameters, especially filaments length per aggregates area (LfA), revealed that morphological changes of granular sludge, should be considered to monitor and control load disturbances in high rate anaerobic (granular) sludge bed digesters.Fundação para a Ciência e a Tecnologia (FCT) - Bolsa SFRH/BD/13317/2003, POCI/AM/60141/2004, POCTI/BIO/37934/200

Modeling the decay of nitrite oxidizing bacteria under different reduction potential conditions

[EN] Autotrophic growth and decay rates of ammonium and nitrite oxidizing bacteria (AOB and NOB, respectively) have a significant impact on the design and on the process performance of wastewater treatment systems where nitrification occurs. Literature data on the separate decay rates of AOB and NOB is scarce and inconsistent. In this study, batch experiments based on respirometric techniques were conducted to determine the NOB decay rates under different oxidation-reduction potential conditions, in order to widen the understanding of nitrite dynamics. The decay rate measured under anoxic conditions was 85% lower than under aerobic conditions, whereas under anaerobic conditions the decay rate reduction was 92%. A design and simulation tool was used to assess the impact of applying these results in differentiated areas of an activated sludge system. Simulations show a greater impact for systems with a sludge retention time under 10 days, for which up to a 16-fold increase in NOB biomass concentration and up to 86% and 80% reductions in ammonium and nitrite concentrations in the effluent were calculated. Therefore, this work demonstrates that considering different decay rates for autotrophic biomass under different ORP conditions avoids underestimating system performance and over dimensioning new activated sludge schemes.This research project has been supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO,project CTM2017-86751-C2), whose support is gratefully acknowledged.Ruiz Martinez, A.; Claros Bedoya, JA.; Serralta Sevilla, J.; Bouzas Blanco, A.; Ferrer, J. (2018). Modeling the decay of nitrite oxidizing bacteria under different reduction potential conditions. Process Biochemistry. 71:159-165. https://doi.org/10.1016/j.procbio.2018.05.021S1591657