Identification of shallow sea models

In this paper we consider a parameter estimation procedure for shallow sea models. The method is formulated as a minimization problem. An adjoint model is used to calculate the gradient of the criterion which is to be minimized. In order to obtain a robust estimation method, the uncertainty of the open boundary conditions can be taken into acoount by allowing random noise inputs to act on the open boundaries. This method avoids the possibility that boundary errors are interpreted by the estimation procedure as parameter fluctuations. We apply the parameter estimation method to identify a shallow sea model of the entire European continental shelf. First, a space-varying bottom friction coefficient is estimated simultaneously with the depth. The second application is the estimation of the parameterization of the wind stress coefficient as a function of the wind velocity. Finally, an uncertain open boundary condition is included. It is shown that in this case the parameter estimation procedure does become more robust and produces more realistic estimates. Furthermore, an estimate of the open boundary conditions is also obtained

Characterisation of Tactile Sensors based on Fibre Bragg gratings Towards Temperature Independent Pressure Sensing

AbstractThis paper presents the development of flexible pressure sensing sheets, based on fibre Bragg grating sensing elements. The devices feature optical wavelength-encoded sensing signals and show promise in applications such as pressure mapping and tactile sensing. FBGs inscribed in highly-birefringent microstructured fibres, reflecting two separate Bragg peaks, are specially employed. Prototypes with FBGs embedded in polymer sheets were produced and characterised for temperature and pressure sensitivities. An improved sensor structure was implemented aiming at temperature independent tactile sensing with Bragg peak separation as the sensing signal

Photonic crystal fiber Bragg grating based sensors:opportunities for applications in healthcare

We review the state-of-the-art in photonic crystal fiber (PCF) and microstructured polymer optical fiber (mPOF) based mechanical sensing. We first introduce how the unique properties of PCF can benefit Bragg grating based temperature insensitive pressure and transverse load sensing. Then we describe how the latest developments in mPOF Bragg grating technology can enhance optical fiber pressure sensing. Finally we explain how the integration of specialty fiber sensor technology with bio-compatible polymer based micro-technology provides great opportunities for fiber sensors in the field of healthcare

Bend-Direction and Rotation Plastic Optical Fiber Sensor

[EN] A plastic filament of poly (methyl methacrylate) (PMMA) was fabricated by extrusion. The mode confinement was simulated using numerical software. The idea is to study how the light intensity changes inside the plastic optical fiber (POF) when a bending in multiple directions is applied. The results obtained from the simulation were compared to the experimental observations. The non-circular shape of the POF allows sensing a rotation applied as well. The angle of rotation was obtained processing two images of the end facet of the fiber (one with the fiber in a reference position and one with the rotated fiber), using an intensity-based automatic image registration. The accuracy in the rotation calculation was of 0.01 degrees.FINESSE project, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement no 722509. Ministry of Economy and Competitiveness project DIMENSION TEC2017 and by the Generalitat Valenciana project PROMETEO 2017/017.Sartiano, D.; Geernaert, T.; Torres Roca, E.; Sales Maicas, S. (2020). Bend-Direction and Rotation Plastic Optical Fiber Sensor. Sensors. 20(18):1-9. https://doi.org/10.3390/s20185405S19201

The use of nasal mupirocin ointment to prevent Staphylococcus aureus bacteraemias in haemodialysis patients: an analysis of cost- effectiveness

Nasal carriage of Staphylococcus aureus is a risk factor for the development of infections caused by S. aureus in haemodialysis patients. This study compared the incidence of bacteraemia caused by S. aureus during 6 months of use of nasal 2% calcium mupirocin ('Nasal Bactroban') 3-times a week for nasal carriers with the incidence observed previously in the same dialysis unit without the use of mupirocin. Nasal mupirocin led to the total eradication of nasal carriage of S. aureus, a 4.26-fold reduction in the incidence of S. aureus bacteraemia, and a substantial cost saving. After a cumulative experience of nasal mupirocin in haemodialysis patients of more than 43 patient-years, the development of mupirocin resistance was not observed

Microstructured Optical Fiber Sensors Embedded in a Laminate Composite for Smart Material Applications

Fiber Bragg gratings written in highly birefringent microstructured optical fiber with a dedicated design are embedded in a composite fiber-reinforced polymer. The Bragg peak wavelength shifts are measured under controlled axial and transversal strain and during thermal cycling of the composite sample. We obtain a sensitivity to transversal strain that exceeds values reported earlier in literature by one order of magnitude. Our results evidence the relevance of using microstructured optical fibers for structural integrity monitoring of composite material structures

Challenges in the Fabrication of Biodegradable and Implantable Optical Fibers for Biomedical Applications

The limited penetration depth of visible light in biological tissues has encouraged researchers to develop novel implantable light-guiding devices. Optical fibers and waveguides that are made from biocompatible and biodegradable materials offer a straightforward but effective approach to overcome this issue. In the last decade, various optically transparent biomaterials, as well as different fabrication techniques, have been investigated for this purpose, and in view of obtaining fully fledged optical fibers. This article reviews the state-of-the-art in the development of biocompatible and biodegradable optical fibers. Whilst several reviews that focus on the chemical properties of the biomaterials from which these optical waveguides can be made have been published, a systematic review about the actual optical fibers made from these materials and the different fabrication processes is not available yet. This prompted us to investigate the essential properties of these biomaterials, in view of fabricating optical fibers, and in particular to look into the issues related to fabrication techniques, and also to discuss the challenges in the use and operation of these optical fibers. We close our review with a summary and an outline of the applications that may benefit from these novel optical waveguides