Gold catalysts for the synthesis of aromatic azocompounds from nitroaromatics in one step

[EN] One-step selective hydrogenation of nitroaromatics to obtain symmetric azocompounds with high yields has been performed with a gold supported on cerium oxide catalysts. Au/TiO2 and Au/CeO2 catalysts direct the reaction by two different pathways and with different selectivities. In situ FTIR studies reveal that the surface concentration of the intermediate nitrosobenzene is decisive in directing the reaction trough the different reaction pathways. In this way, while on Au/TiO2 a fast hydrogenation of the nitrosobenzene intermediate leads to a low surface concentration of the nitrosocompound, on Au/CeO2 nitrosobenzene is more stabilized on the catalyst surface leading to a lower hydrogenation and a higher coupling rate, resulting in high selectivities to azobenzene. On Au/CeO2, the relative weak adsorption of the azo with respect to the azoxycompound on the catalyst surface avoids the consecutive hydrogenation of azocompounds to the corresponding anilines until all the azoxy has been consumed. Asymmetric azobenzenes have also been obtained with very high yields on TiO2, through the Mills reaction.The authors wish to acknowledge the financial support from the Spanish Ministries of Education and Science and Economy and Competitiveness under the project Consolider-Ingenio 2010 (CSD2009-00050 "Development of more efficient catalysts for the design of sustainable chemical processes and clean energy production") and the Severo Ochoa program (SEV-2012-0267), respectively. D.C. thanks the Spanish MEC for postgraduate scholarship, project MAT2006-14274-C02-01.Cómbita Merchán, DF.; Concepción Heydorn, P.; Corma Canós, A. (2014). Gold catalysts for the synthesis of aromatic azocompounds from nitroaromatics in one step. Journal of Catalysis. 311:339-349. https://doi.org/10.1016/j.jcat.2013.12.014S33934931

Enzymatic reduction of azo and indigoid compounds

A customer- and environment-friendly method for the decolorization azo dyes was developed. Azoreductases could be used both to bleach hair dyed with azo dyes and to reduce dyes in vat dyeing of textiles. A new reduced nicotinamide adenine dinucleotide-dependent azoreductase of Bacillus cereus, which showed high potential for reduction of these dyes, was purified using a combination of ammonium sulfate precipitation and chromatography and had a molecular mass of 21.5 kDa. The optimum pH of the azoreductase depended on the substrate and was within the range of pH 6 to 7, while the maximum temperature was reached at 40°C. Oxygen was shown to be an alternative electron acceptor to azo compounds and must therefore be excluded during enzymatic dye reduction. Biotransformation of the azo dyes Flame Orange and Ruby Red was studied in more detail using UV-visible spectroscopy, high-performance liquid chromatography, and mass spectrometry (MS). Reduction of the azo bonds leads to cleavage of the dyes resulting in the cleavage product 2-amino-1,3 dimethylimidazolium and N∼1∼,N∼1∼-dimethyl-1,4-benzenediamine for Ruby Red, while only the first was detected for Flame Orange because of MS instability of the expected 1,4-benzenediamine. The azoreductase was also found to reduce vat dyes like Indigo Carmine (C.I. Acid Blue 74). Hydrogen peroxide (H2O2) as an oxidizing agent was used to reoxidize the dye into the initial form. The reduction and oxidation mechanism of Indigo Carmine was studied using UV-visible spectroscopy

Analgesics use and ESRD in younger age: a case-control study

<p>Abstract</p> <p>Background</p> <p>An ad hoc peer-review committee was jointly appointed by Drug Authorities and Industry in Germany, Austria and Switzerland in 1999/2000 to review the evidence for a causal relation between phenacetin-free analgesics and nephropathy. The committee found the evidence as inconclusive and requested a new case-control study of adequate design.</p> <p>Methods</p> <p>We performed a population-based case-control study with incident cases of end-stage renal disease (ESRD) under the age of 50 years and four age and sex-matched neighborhood controls in 170 dialysis centers (153 in Germany, and 17 in Austria) from January 1, 2001 to December 31, 2004. Data on lifetime medical history, risk factors, treatment, job exposure and intake of analgesics were obtained in a standardized face-to-face interview using memory aids to enhance accuracy. Study design, study performance, analysis plan, and study report were approved by an independent international advisory committee and by the Drug Authorities involved. Unconditional logistic regression analyses were performed.</p> <p>Results</p> <p>The analysis included 907 cases and 3,622 controls who had never used phenacetin-containing analgesics in their lifetime. The use of high cumulative lifetime dose (3^rdtertile) of analgesics in the period up to five years before dialysis was not associated with later ESRD. Adjusted odds ratios with 95% confidence intervals were 0.8 (0.7 – 1.0) and 1.0 (0.8 – 1.3) for ever- compared with no or low use and high use compared with low use, respectively. The same results were found for all analgesics and for mono-, and combination preparations with and without caffeine. No increased risk was shown in analyses stratifying for dose and duration. Dose-response analyses showed that analgesic use was not associated with an increased risk for ESRD up to 3.5 kg cumulative lifetime dose (98 % of the cases with ESRD). While the large subgroup of users with a lifetime dose up to 0.5 kg (278 cases and 1365 controls) showed a significantly decreased risk, a tiny subgroup of extreme users with over 3.5 kg lifetime use (19 cases and 11 controls) showed a significant risk increase. The detailed evaluation of 22 cases and 19 controls with over 2.5 kg lifetime use recommended by the regulatory advisors showed an impressive excess of other conditions than analgesics triggering the evolution of ESRD in cases compared with controls.</p> <p>Conclusion</p> <p>We found no clinically meaningful evidence for an increased risk of ESRD associated with use of phenacetin-free analgesics in single or combined formulation. The apparent risk increase shown in a small subgroup with extreme lifetime dose of analgesics is most likely an indirect, non-causal association. This hypothesis, however, cannot be confirmed or refuted within our case-control study. Overall, our results lend support to the mounting evidence that phenacetin-free analgesics do not induce ESRD and that the notion of "analgesic nephropathy" needs to be re-evaluated.</p

Comparison of published orthopaedic trauma trials following registration in Clinicaltrials.gov

<p>Abstract</p> <p>Background</p> <p>After the Food and Drug Administration Modernization Act of 1997, the registration of all clinical trials became mandatory prior to publication. Our primary objective was to determine publication rates for orthopaedic trauma trials registered with ClinicalTrials.gov. We further evaluated methodological consistency between registration and publication.</p> <p>Methods</p> <p>We searched Clinical Trials.gov for all trials related to orthopaedic trauma. We excluded active trials and trials not completed by July 2009, and performed a systematic search for publications resulting from registered closed trials. Information regarding primary and secondary outcomes, intervention, study sponsors, and sample size were extracted from registrations and publications.</p> <p>Results</p> <p>Of 130 closed trials, 37 eligible trials resulted in 16 publications (43.2%). We found no significant differences in publication rates between funding sources for industry sponsored studies and nongovernment/nonindustry sponsored studies (<it>p </it>> 0.05). About half the trials (45%) did not include the NCT ID in the publication. Two (10%) publications had major changes to the primary outcome measure and ten (52.6%) to sample size.</p> <p>Conclusions</p> <p>Registration of orthopaedic trauma trials does not consistently result in publication. When trials are registered, many do not cite NCT ID in the publication. Furthermore, changes that are not reflected in the registry of the trial are frequently made to the final publication.</p

Electric Field Exposure Triggers and Guides Formation of Pseudopod-Like Blebs in U937 Monocytes

We describe a new phenomenon of anodotropic pseudopod-like blebbing in U937 cells stimulated by nanosecond pulsed electric field (nsPEF). In contrast to regular, round-shaped blebs, which are often seen in response to cell damage, pseudopod-like blebs (PLBs) formed as longitudinal membrane protrusions toward anode. PLB length could exceed the cell diameter in 2 min of exposure to 60-ns, 10-kV/cm pulses delivered at 10-20 Hz. Both PLBs and round-shaped nsPEF-induced blebs could be efficiently inhibited by partial isosmotic replacement of bath NaCl for a larger solute (sucrose), thereby pointing to the colloid-osmotic water uptake as the principal driving force for bleb formation. In contrast to round-shaped blebs, PLBs retracted within several minutes after exposure. Cells treated with 1 nM of the actin polymerization blocker cytochalasin D were unable to form PLBs and instead produced stationary, spherical blebs with no elongation or retraction capacity. Live cell fluorescent actin tagging showed that during elongation actin promptly entered the PLB interior, forming bleb cortex and scaffold, which was not seen in stationary blebs. Overall, PLB formation was governed by both passive (physicochemical) effects of membrane permeabilization and active cytoskeleton assembly in the living cell. To a certain extent, PLB mimics the membrane extension in the process of cell migration and can be employed as a nonchemical model for studies of cytomechanics, membrane-cytoskeleton interaction and cell motility

Colorimetric nanofibers as optical sensors

Sensors play a major role in many applications today, ranging from biomedicine to safety equipment, where they detect and warn us about changes in the environment. Nanofibers, characterized by high porosity, flexibility, and a large specific surface area, are the ideal material for ultrasensitive, fastresponding, and user-friendly sensor design. Indeed, a large specific surface area increases the sensitivity and response time of the sensor as the contact area with the analyte is enlarged. Thanks to the flexibility of membranes, nanofibrous sensors cannot only be applied in high-end analyte detection, but also in personal, daily use. Many different nanofibrous sensors have already been designed; albeit, the most straightforward and easiest-to-interpret sensor response is a visual change in color, which is of particular interest in the case of warning signals. Recently, many researchers have focused on the design of so-called colorimetric nanofibers, which typically involve the incorporation of a colorimetric functionality into the nanofibrous matrix. Many different strategies have been used and explored for colorimetric nanofibrous sensor design, which are outlined in this feature article. The many examples and applications demonstrate the value of colorimetric nanofibers for advanced optical sensor design, and could provide directions for future research in this area

A 300-year record of sedimentation in a small tilled catena in Hungary based on δ13C, δ15N, and C/N distribution

Purpose Soil erosion is one of the most serious hazards that endanger sustainable food production. Moreover, it has marked effects on soil organic carbon (SOC) with direct links to global warming. At the same time, soil organic matter (SOM) changes in composition and space could influence these processes. The aim of this study was to predict soil erosion and sedimentation volume and dynamics on a typical hilly cropland area of Hungary due to forest clearance in the early eighteenth century. Materials and methods Horizontal soil samples were taken along two parallel intensively cultivated complex convex-concave slopes from the eroded upper parts at mid-slope positions and from sedimentation in toe-slopes. Samples were measured for SOC, total nitrogen (TN) content, and SOMcompounds (δ13C, δ15N, and photometric indexes). They were compared to the horizons of an in situ non-eroded profile under continuous forest. On the depositional profile cores, soil depth prior to sedimentation was calculated by the determination of sediment thickness. Results and discussion Peaks of SOC in the sedimentation profiles indicated thicker initial profiles, while peaks in C/N ratio and δ13C distribution showed the original surface to be ~ 20 cm lower. Peaks of SOC were presumed to be the results of deposition of SOC-enriched soil from the upper slope transported by selective erosion of finer particles (silts and clays). Therefore, changes in δ13C values due to tillage and delivery would fingerprint the original surface much better under the sedimentation scenario than SOC content. Distribution of δ13C also suggests that the main sedimentation phase occurred immediately after forest clearance and before the start of intense cultivation with maize. Conclusions This highlights the role of relief in sheet erosion intensity compared to intensive cultivation. Patterns of δ13C indicate the original soil surface, even in profiles deposited as sediment centuries ago. The δ13C and C/N decrease in buried in situ profiles had the same tendency as recent forest soil, indicating constant SOM quality distribution after burial. Accordingly, microbiological activity, root uptake, and metabolism have not been effective enough to modify initial soil properties

Radiation induced CNS toxicity – molecular and cellular mechanisms

Radiotherapy of tumours proximal to normal CNS structures is limited by the sensitivity of the normal tissue. Prior to the development of prophylactic strategies or treatment protocols a detailed understanding of the mechanisms of radiation induced CNS toxicity is mandatory. Histological analysis of irradiated CNS specimens defines possible target structures prior to a delineation of cellular and molecular mechanisms. Several lesions can be distinguished: Demyelination, proliferative and degenerative glial reactions, endothelial cell loss and capillary occlusion. All changes are likely to result from complex alterations within several functional CNS compartments. Thus, a single mechanism responsible cannot be separated. At least four factors contribute to the development of CNS toxicity: (1) damage to vessel structures; (2) deletion of oligodendrocyte-2 astrocyte progenitors (O-2A) and mature oligodendrocytes; (3) deletion of neural stem cell populations in the hippocampus, cerebellum and cortex; (4) generalized alterations of cytokine expression. Several underlying cellular and molecular mechanisms involved in radiation induced CNS toxicity have been identified. The article reviews the currently available data on the cellular and molecular basis of radiation induced CNS side effects.   http://www.bjcancer.com © 2001 Cancer Research Campaig

Nephronophthisis

Nephronophthisis (NPH) is an autosomal recessive disease characterized by a chronic tubulointerstitial nephritis that progress to terminal renal failure during the second decade (juvenile form) or before the age of 5 years (infantile form). In the juvenile form, a urine concentration defect starts during the first decade, and a progressive deterioration of renal function is observed in the following years. Kidney size may be normal, but loss of corticomedullary differentiation is often observed, and cysts occur usually after patients have progressed to end-stage renal failure. Histologic lesions are characterized by tubular basement membrane anomalies, tubular atrophy, and interstitial fibrosis. The infantile form is characterized by cortical microcysts and progression to end-stage renal failure before 5 years of age. Some children present with extrarenal symptoms: retinitis pigmentosa (Senior-Løken syndrome), mental retardation, cerebellar ataxia, bone anomalies, or liver fibrosis. Positional cloning and candidate gene approaches led to the identification of eight causative genes (NPHP1, 3, 4, 5, 6, 7, 8, and 9) responsible for the juvenile NPH and one gene NPHP2 for the infantile form. NPH and associated disorders are considered as ciliopathies, as all NPHP gene products are expressed in the primary cilia, similarly to the polycystic kidney disease (PKD) proteins

Einfluss der Verarbeitungstechnologie und Werkstoffzusammensetzung auf die Struktur-Eigenschafts-Beziehungen von thermoplastischen Nanoverbundwerkstoffen

Die Einarbeitung von nanoskaligen Füllstoffen zur Steigerung von polymeren Eigenschaftsprofilen ist sehr viel versprechend und stößt daher heutzutage sowohl in der Forschung als auch in der Industrie auf großes Interesse. Bedingt durch ausgeprägte Oberflächen und hohe Anziehungskräfte, liegen Nanopartikel allerdings nicht singulär sondern als Partikelanhäufungen, so genannten Agglomeraten oder Aggregaten, vor. Zur Erzielung der gewünschten Materialverbesserungen gilt es, diese aufzuspalten und homogen in der polymeren Matrix zu verteilen. Bei thermoplastischen Kunststoffen ist die gleichläufige Doppelschneckenextrusion eines der gängigsten Verfahren zur Einarbeitung von Additiven und Füllstoffen. Aus diesem Grund war es Ziel dieser Arbeit, mittels dieses Verfahrens verbesserte Verbundwerkstoffe mit Polyamid 66- und Polyetheretherketon-Matrix, durch Einarbeitung von nanoskaligem Titandioxid (15 und 300 nm), zu generieren. In einem ersten Schritt wurden die verfahrenstechnischen Parameter, wie Drehzahl und Durchsatz, sowie die Prozessführung und damit deren Einfluss auf die Materialeigenschaften beleuchtet. Der spezifische Energieeintrag ist ausschlaggebend zur Deagglomeration der Nanopartikel. Dieser zeigte leichte Abhängigkeiten von der Drehzahl und dem Durchsatz und verursachte bei der Einarbeitung der Partikel keine wesentlichen Unterschiede in der Aufspaltung der Partikel sowie gar keine in den resultierenden mechanischen Eigenschaften. Die Prozessführung wurde unterteilt in Mehrfach- und Einfachextrusion. Die Herstellung eines hochgefüllten Masterbatches, dessen mehrfaches Extrudieren und anschließendes Verdünnen, führte zu einer sehr guten Deagglomeration und stark verbesserten Materialeigenschaften. Mittels Simulation des Extrusionsprozesses konnte festgestellt werden, dass das Vorhandensein von ungeschmolzenem Granulat in der Verfahrenszone zu einer Schmelze/Nanopartikel/ Feststoffreibung führt, die die Ursache für eine sehr gute Aufspaltung der Partikel zu sein scheint. Durch Modifikation des Extrusionsprozesses erreichte die Einfachextrusion annähernd den Grad an Deagglomeration bei Mehrfachextrusion, wobei die Materialien bei letzterem Verfahren die besten Eigenschaftsprofile aufwiesen. In einem zweiten Schritt wurde ein Vergleich der Einflüsse von unterschiedlichen Partikelgrößen und –gehalten auf die polymeren Matrizes vollzogen. Die 15 nm Partikel zeigten signifikant bessere mechanische Ergebnisse auf als die 300 nm Partikel, und die Wirkungsweise des 15 nm Partikels auf Polyetheretherketon war stärker als auf Polyamid 66. Es konnten Steigerungen in Steifigkeit, Festigkeit und Zähigkeit erzielt werden. Rasterelektronenmikroskopische Aufnahmen bestätigten diese Ergebnisse. Eine Berechnung der Plan-Selbstkosten von einem Kilogramm PEEK-Nanoverbundwerkstoff im Vergleich zu einem Kilogramm unverstärktem PEEK verdeutlichte, dass ein Material kreiert wurde, welches deutlich verbesserte Eigenschaften bei gleichem Preis aufweist. Zusammenfassend konnte in dieser Arbeit ein tieferes Verständnis des Extrusionsvorganges zur Herstellung von kostengünstigen und verbesserten Thermoplasten durch das Einbringen von Nanopartikeln gewonnen werden