Polymer nanofibers as novel light-emitting sources and lasing material

Polymer micro- and nano-fibers, made of organic light-emitting materials with optical gain, show interesting lasing properties. Fibers with diameters from few tens of nm to few microns can be fabricated by electrospinning, a method based on electrostatic fields applied to a polymer solution. The morphology and emission properties of these fibers, composed of optically inert polymers embedding laser dyes, are characterized by scanning electron and fluorescence microscopy, and lasing is observed under optical pumping for fluences of the order of 10^2 microJ cm^-2. In addition, light-emitting fibers can be electrospun by conjugated polymers, their blends, and other active organics, and can be exploited in a range of photonic and electronic devices. In particular, waveguiding of light is observed and characterized, showing optical loss coefficient in the range of 10^2-10^3 cm^-1. The reduced size of these novel laser systems, combined with the possibility of achieving wavelength tunability through transistor or other electrode-based architectures embedding non-linear molecular layers, and with their peculiar mechanical robustness, open interesting perspectives for realizing miniaturized laser sources to integrate on-chip optical sensors and photonic circuits.Comment: 7 pages, 3 figures, 27 references. Invited contribution. Copyright (2013) Society of Photo Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibite

Effect of finite terms on the truncation error of Mie series

The finite sum of the squares of the Mie coefficients is very useful for addressing problems of classical light scattering. An approximate formula available in the literature, and still in use today, has been developed to determine a priori the number of the most significant terms needed to evaluate the scattering cross section. Here we obtain an improved formula, which includes the number of terms needed for determining the scattering cross section within a prescribed relative error. This is accomplished using extended precision computation, for a wide range of commonly used size parameters and indexes of refraction. The revised formula for the finite number of terms can be a promising and valuable approach for efficient modeling light scattering phenomena.Comment: 3 pages, 3 figure

Effects of Nanoparticles on the Dynamic Morphology of Electrified Jets

We investigate the effects of nanoparticles on the onset of varicose and whipping instabilities in the dynamics of electrified jets. In particular, we show that the non-linear interplay between the mass of the nanoparticles and electrostatic instabilities, gives rise to qualitative changes of the dynamic morphology of the jet, which in turn, drastically affect the final deposition pattern in electrospinning experiments. It is also shown that even a tiny amount of excess mass, of the order of a few percent, may more than double the radius of the electrospun fiber, with substantial implications for the design of experiments involving electrified jets as well as spun organic fibers.Comment: 8 pages, 7 figures, 1 tabl

Non-linear Langevin model for the early-stage dynamics of electrospinning jets

We present a non-linear Langevin model to investigate the early-stage dynamics of electrified polymer jets in electrospinning experiments. In particular, we study the effects of air drag force on the uniaxial elongation of the charged jet, right after ejection from the nozzle. Numerical simulations show that the elongation of the jet filament close to the injection point is significantly affected by the non-linear drag exerted by the surrounding air. These result provide useful insights for the optimal design of current and future electrospinning experiments.Comment: 11 pages, 6 figures, 1 table. arXiv admin note: text overlap with arXiv:1503.0469

Computational homogenization of fibrous piezoelectric materials

Flexible piezoelectric devices made of polymeric materials are widely used for micro- and nano-electro-mechanical systems. In particular, numerous recent applications concern energy harvesting. Due to the importance of computational modeling to understand the influence that microscale geometry and constitutive variables exert on the macroscopic behavior, a numerical approach is developed here for multiscale and multiphysics modeling of thin piezoelectric sheets made of aligned arrays of polymeric nanofibers, manufactured by electrospinning. At the microscale, the representative volume element consists in piezoelectric polymeric nanofibers, assumed to feature a piezoelastic behavior and subjected to electromechanical contact constraints. The latter are incorporated into the virtual work equations by formulating suitable electric, mechanical and coupling potentials and the constraints are enforced by using the penalty method. From the solution of the micro-scale boundary value problem, a suitable scale transition procedure leads to identifying the performance of a macroscopic thin piezoelectric shell element.Comment: 22 pages, 13 figure

A multiscale-multiphysics strategy for numerical modeling of thin piezoelectric sheets

Flexible piezoelectric devices made of polymeric materials are widely used for micro- and nano-electro-mechanical systems. In particular, numerous recent applications concern energy harvesting. Due to the importance of computational modeling to understand the influence that microscale geometry and constitutive variables exert on the macroscopic behavior, a numerical approach is developed here for multiscale and multiphysics modeling of piezoelectric materials made of aligned arrays of polymeric nanofibers. At the microscale, the representative volume element consists in piezoelectric polymeric nanofibers, assumed to feature a linear piezoelastic constitutive behavior and subjected to electromechanical contact constraints using the penalty method. To avoid the drawbacks associated with the non-smooth discretization of the master surface, a contact smoothing approach based on B\'ezier patches is extended to the multiphysics framework providing an improved continuity of the parameterization. The contact element contributions to the virtual work equations are included through suitable electric, mechanical and coupling potentials. From the solution of the micro-scale boundary value problem, a suitable scale transition procedure leads to the formulation of a macroscopic thin piezoelectric shell element.Comment: 11 pages, 6 pages, 21 reference

Different regimes of the uniaxial elongation of electrically charged viscoelastic jets due to dissipative air drag

We investigate the effects of dissipative air drag on the dynamics of electrified jets in the initial stage of the electrospinning process. The main idea is to use a Brownian noise to model air drag effects on the uniaxial elongation of the jets. The developed numerical model is used to probe the dynamics of electrified polymer jets at different conditions of air drag force, showing that the dynamics of the charged jet is strongly biased by the presence of air drag forces. This study provides prospective beneficial implications for improving forthcoming electrospinning experiments.Comment: 12 pages, 6 figure

Effects of non-linear rheology on the electrospinning process: a model study

We develop an analytical bead-spring model to investigate the role of non-linear rheology on the dynamics of electrified jets in the early stage of the electrospinning process. Qualitative arguments, parameter studies as well as numerical simulations, show that the elongation of the charged jet filament is significantly reduced in the presence of a non-zero yield stress. This may have beneficial implications for the optimal design of future electrospinning experiments

JETSPIN: a specific-purpose open-source software for simulations of nanofiber electrospinning

We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed in detail. The code is designed to exploit different computational architectures, from single to parallel processor workstations. This paper provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability.Comment: 22 pages, 11 figures. arXiv admin note: substantial text overlap with arXiv:1507.0701