Humidity induces changes in the dimensions of hydrogel-coated wool yarns

Polymeric hydrogel based on acrylic acid (AA) and N,N-dimethylacrylamide (DMAA) was prepared by photopolymerization reaction, using nano-alumina as the inorganic crosslinker. Hydrogel-coated wool yarns determine their dimensional changes under humidity conditions. Surface morphology of the hydrogel-coated wool yarns was carried out using SEM microscopy. The hydrogel was further characterized by Fourier transformer infrared spectrum (FTIR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetry (TG) and differential thermogravimetry (DTG). This contribution showed that UV-initiated polymerization coating wool yarns can change the functional properties of wool fibers.ThisresearchwassupportedbytheFundamentalResearchFundsfortheCentralUniversities (JUSRP115A03) and Chinese Foundation Key Projects of Governmental Cooperation in International Scientific and Technological Innovation (2016YFE0115700). This study was also supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund under the scope of Norte2020—Programa Operacional Regional do Norte.info:eu-repo/semantics/publishedVersio

Comparing Laser Diffraction and Optical Microscopy for Characterizing Superabsorbent Polymer Particle Morphology, Size, and Swelling Capacity

In this study, we determined the accuracy and practicality of using optical microscopy (OM) and laser diffraction (LD) to characterize hydrogel particle morphology, size, and swelling capacity (Q). Inverse-suspension-polymerized polyacrylamide particles were used as a model system. OM and LD showed that the average particle diameter varied with the mixing speed during synthesis for the dry (10–120 lm) and hydrated (34–240 lm) particles. The LD volume and number mean diameters showed that a few large particles were responsible for the majority of the water absorption. Excess water present in the gravimetric swelling measurements led to larger Qs (8.2 6 0.37 g/g), whereas the volumetric measurements with OM and LD resulted in reduced capacities (6.5 6 3.8 and 5.7 6 3.9 g/g, respectively). Results from the individual particle swelling measurements with OM (5.2 6 0.66 g/g) statistically confirmed that the volumetric methods resulted in a reduced and more accurate measurement of the Q than the gravimetric method

Optimizing the Power Production in an Osmotic Engine via Microfluidic Fabricated and Surface Crosslinked Hydrogels Utilizing Fresh and Salt Water

Salinity gradients between seawater and river water is a renewable source of energy having a worldwide potential capacity of about 3.1 TW. This energy can be extracted by e.g., an osmotic engine, using hydrogels with high water uptake capacity. Consecutive exposing hydrogels to fresh and saline water makes swelling–shrinking cycles, which can be utilized to move a piston in an osmotic engine. The production of power with this method is significantly suppressed by gelblocking, where voids between particles are blocked so that the water flow is limited and the absorbency significantly retarded. To improve the power production, the gelblocking is minimized within this article by using spherical mono‐dispersed hydrogels made by microfluidic technique. In this study mono‐disperse poly(acrylic acid‐co‐sodium acrylate) hydrogels with varying diameters (100‐600 µm) and varying degrees of neutralization (DN = 10–75 mol%) are synthesized. In addition, hydrogels with different DN are utilized for additional surface crosslinking to fabricate core–shell particles. The maximum power of 0.67 W kg$^{-1}$ is obtained for hydrogels with a diameter of 105 µm, degree of crosslinking (DC) = 1.7 mol%, DN = 75 mol%, and a core‐shell architecture, which is three times higher compared to hydrogels having undefined size without a core–shell framework

Novel transparent nanocomposite films based on chitosan and bacterial cellulose

New nanocomposite films based on different chitosan matrices (two chitosans with different DPs and one water soluble derivative) and bacterial cellulose were prepared by a fully green procedure by casting a water based suspension of chitosan and bacterial cellulose nanofibrils. The films were characterized by several techniques, namely SEM, AFM, X-ray diffraction, TGA, tensile assays and visible spectroscopy. They were highly transparent, flexible and displayed better mechanical properties than the corresponding unfilled chitosan films. These new renewable nanocomposite materials also presented reasonable thermal stability and low O(2) permeability.FCT - SFRH/BD/41388/ 2007FCT - SFRH/BPD/38515/200

Biomedical applications of hydrogels: a review of patents and commercial products

Hydrogels have become very popular due to their unique properties such as high water content, softness, flexibility and biocompatibility. Natural and synthetic hydrophilic polymers can be physically or chemically cross-linked in order to produce hydrogels. Their resemblance to living tissue opens up many opportunities for applications in biomedical areas. Currently, hydrogels are used for manufacturing contact lenses, hygiene products, tissue engineering scaffolds, drug delivery systems and wound dressings. This review provides an analysis of their main characteristics and biomedical applications. From Wichterle’s pioneering work to the most recent hydrogel-based inventions and products on the market, it provides the reader with a detailed introduction to the topic and perspective on further potential developments

Preparation and characterization of microcapsules of Pterodon pubescens Benth. by using natural polymers

An oleaginous fraction obtained from an alcohol extract of the fruit of Pterodon pubescensBenth. (FHPp) was microencapsulated in polymeric systems. These systems were developed using a complex coacervation method and consisted of alginate/medium-molecular-weight chitosan (F1-MC), alginate/chitosan with greater than 75% deacetylation (F2-MC), and alginate/low-molecular-weight chitosan (F3-MC). These developed systems have the potential to both mask the taste of the extract, and to protect its constituents against possible chemical degradation. The influence of the formulation parameters and process were determined by chemical profiling and measurement of the microencapsulation efficiency of the oleaginous fraction, and by assessment of microcapsule morphology. The obtained formulations were slightly yellow, odorless, and had a pleasant taste. The average diameters of the microcapsules were 0.4679 µm (F2-MC), 0.5885 µm (F3-MC), and 0.9033 µm (F1-MC). The best formulation was F3-MC, with FHPp microencapsulation efficiency of 61.01 ± 2.00% and an in vitro release profile of 75.88 ± 0.45%; the content of vouacapans 3-4 was 99.49 ± 2.80%. The best model to describe the release kinetics for F1-MC and F3-MC was that proposed by Higuchi; however, F2-MC release displayed first-order kinetics; the release mechanism was of the supercase II type for all formulations

Continence technologies whitepaper: Informing new engineering science research

Advances in healthcare technology for continence have historically been limited compared to other areas of medicine, reflecting the complexities of the condition and social stigma which act as a barrier to participation. This whitepaper has been developed to inspire and direct the engineering science community towards research opportunities that exist for continence technologies that address unmet needs in diagnosis, treatment and long-term management. Our aim is to pinpoint key challenges and highlight related research opportunities for novel technological advances. To do so, we draw on experience and expertise from academics, clinicians, patients and patient groups linked to continence healthcare. This is presented in four areas of consideration: the clinical pathway, patient perspective, research challenges and effective innovation. In each we introduce seminal research, background information and demonstrative case-studies, before discussing their relevance to engineering science researchers who are interested in approaching this overlooked but vital area of healthcare