Spin-Glass-Like Behavior in Very Dilute PdFe at Very Low Temperatures

Measurements of the electrical resistivity of palladium, residual resistivity ratio ∼22 500, containing 1.7 ppm of Fe have been made from 5.5 K to 1.8 mK. 15 Hz ac susceptibility measurements from 1 K to 1.8 mK together with the resistivity data suggest that a transition into a spin-glass state occurs near 7 mK

Physical activity monitoring in Europe : the European physical activity surveillance system (EUPASS) approach and indicator testing.

Objectives: The main objective of this paper is to describe the approach and specific findings of the European Physical Activity Surveillance System (EUPASS) research project. In particular, the analysis presented aims at testing the reliability, comparability and predictive power of different sets of physical activity (PA) indicators. Design: First, a panel study based on computer-aided telephone interview (CATI) was designed to report PA data of a representative, selected group of about 100 persons per country at three points in time. Second, a CATI time series survey was carried out with the goal of realising about 100 interviews per month over six consecutive months. Setting: The project was carried out in eight European countries to support the development of the European Union's (EU) Health Monitoring Programme. Subjects: Random population samples (subjects aged 18 years and older) were drawn from each participating country. Results: While many PA indicators used in EU countries to date as well as the psychosocial and environmental measures tested in the present study had acceptable to good reliability coefficients, the test–retest reliability scores of the International Physical Activity Questionnaire (IPAQ) version tested (the short (last 7 days) telephone interview IPAQ; IPAQ-S7T) were rather low. The comparability between extant national PA items and the IPAQ-S7T was low for all countries. The strongest predictors of perceived health were the psychosocial and environmental PA indicators. Conclusions: According to the results of the present study, more research is needed to further investigate and improve the quality of the IPAQ. In addition, the specific predictive power of the tested psychosocial and environmental PA indicators on perceived health should be of particular interest for designing health surveillance activities in the future

Authigenic minerals reflect microbial control on pore waters in a ferruginous analogue

Ferruginous conditions prevailed in the oceans through much of Earth's history. However, minerals recording these conditions remain difficult to interpret in terms of biogeochemical processes prior to lithification. In Lake Towuti, Indonesia, ferruginous sediments are deposited under anoxic sulfate-poor conditions similar to the Proterozoic oceans, allowing the study of mineralogical (trans)formations during microbial diagenesis. Comprehensive pore water geochemistry, high resolution geochemical core profiles, and electron microscopy of authigenic minerals revealed in situ formation of magnetite, millerite, and abundant siderite and vivianite along a 100 m long sequence. Framboidal magnetites represent primary pelagic precipitates, whereas millerite, a sulfide mineral often overlooked under sulfate-poor conditions, shows acicular aggregates entangled with siderite and vivianite resulting from saturated pore waters and continuous growth during burial. These phases act as biosignatures of microbial iron and sulfate reduction, fermentation and methanogenesis, processes clearly traceable in pore water profiles. Variability in metal and organic substrates attests to environment driven processes, differentially sustaining microbial processes along the stratigraphy. Geochemical profiles resulting from microbial activity over 200 kyr after deposition provide constraints on the depth and age of mineral formation within ferruginous records

On the de Haas-van Alphen effect in inhomogeneous alloys

We show that Landau level broadening in alloys occurs naturally as a consequence of random variations in the local quasiparticle density, without the need to consider a relaxation time. This approach predicts Lorentzian-broadened Landau levels similar to those derived by Dingle using the relaxation-time approximation. However, rather than being determined by a finite relaxation time $\tau$, the Landau-level widths instead depend directly on the rate at which the de Haas-van Alphen frequency changes with alloy composition. The results are in good agreement with recent data from three very different alloy systems.Comment: 5 pages, no figure

Authigenic minerals reflect microbial control on pore waters in a ferruginous analogue

Ferruginous conditions prevailed in the oceans through much of Earth’s history. However, minerals recording these conditions remain difficult to interpret in terms of biogeochemical processes prior to lithification. In Lake Towuti, Indonesia, ferruginous sediments are deposited under anoxic sulfate-poor conditions similar to the Proterozoic oceans, allowing the study of mineralogical (trans)formations during microbial diagenesis. Comprehensive pore water geochemistry, high resolution geochemical core profiles, and electron microscopy of authigenic minerals revealed in situ formation of magnetite, millerite, and abundant siderite and vivianite along a 100 m long sequence. Framboidal magnetites represent primary pelagic precipitates, whereas millerite, a sulfide mineral often overlooked under sulfate-poor conditions, shows acicular aggregates entangled with siderite and vivianite resulting from saturated pore waters and continuous growth during burial. These phases act as biosignatures of microbial iron and sulfate reduction, fermentation and methanogenesis, processes clearly traceable in pore water profiles. Variability in metal and organic substrates attests to environment driven processes, differentially sustaining microbial processes along the stratigraphy. Geochemical profiles resulting from microbial activity over 200 kyr after deposition provide constraints on the depth and age of mineral formation within ferruginous records

Revision of a Failed Primary Total Hip Arthroplasty following Excessive Reaming with a Medial Cup Protrusion.

Background and Objectives: Atraumatic intrapelvic protrusion of the acetabular component following excessive reaming of the acetabulum with a far medial positioning of the cup is a rare, but serious complication of a total hip arthroplasty (THA). This study analyzes the factors contributing to this uncommon complication and presents the outcome after the revision surgery using the Ganz reinforcement ring combined with a bone graft and plating of the posterior column and/or screws for the anterior column. Materials and Methods: A retrospective case series study with seven patients (four males, mean age 76 ± 10 years (60-86)) that underwent a revision THA within 24 ± 17 days (5-60) after an atraumatic periprosthetic acetabular fracture with a medial cup protrusion was performed. All fractures were reconstructed with a Ganz reinforcement ring and bone graft with a mean follow-up of 1.7 ± 1.7 years (0.5-5). Radiographs were evaluated for the following: (i) cup positioning immediately after the primary THA and the revision surgery, (ii) cup migration in the follow-up, and (iii) fracture healing. Results: The position of the acetabular component as assessed on the postoperative radiographs after the index surgery and before the complete medial cup protrusion showed a cup placement beyond the ilioischial line indicative of a fracture of the medial wall. The revision surgery with the reconstruction of the medial wall with a Ganz reinforcement ring combined with a bone graft restored in the presented cases the center of rotation in the horizontal direction with a statistical significance (p < 0.05). During the follow-up, there was no aseptic loosening with the relevant cup migration or significant change in the position of the acetabular cup at the final follow-up (p > 0.05) after the revision. All seven fractures and bone grafts realized a bone union until the latest follow-up. Conclusions: Following excessive reaming, the acetabular component was placed too far medially and resulted in an intrapelvic cup protrusion. An unstable cup following a fracture of the medial wall was evident on the immediate postoperative radiographs. In the case of the medial wall perforation with an intrapelvic cup protrusion after the primary THA, the reconstruction with a Ganz reinforcement ring was a successful treatment option resulting in the fracture healing and a stable cup positioning. Surgeons should be aware of that rare and probably underreported complication and restore the anatomic center of rotation by treating the defect intraoperatively

Certified Computer Algebra on top of an Interactive Theorem Prover

Contains fulltext : 35027.pdf (publisher's version ) (Open Access

Origin and significance of diagenetic concretions in sediments of Laguna Potrok Aike, southern Argentina

Authigenic minerals can form in the water column and sediments of lakes, either abiotically or mediated by biological activity. Such minerals have been used as paleosalinity and paleoproductivity indicators and reflect trophic state and early diagenetic conditions. They are also considered potential indicators of past and perhaps ongoing microbial activity within sediments. Authigenic concretions, including vivianite, were described in late glacial sediments of Laguna Potrok Aike, a maar lake in southernmost Argentina. Occurrence of iron phosphate implies specific phosphorus sorption behavior and a reducing environment, with methane present. Because organic matter content in these sediments was generally low during glacial times, there must have been alternative sources of phosphorus and biogenic methane. Identifying these sources can help define past trophic state of the lake and diagenetic processes in the sediments. We used scanning electron microscopy, phosphorus speciation in bulk sediment, pore water analyses, in situ ATP measurements, microbial cell counts, and measurements of methane content and its carbon isotope composition (δ13CCH4) to identify components of and processes in the sediment. The multiple approaches indicated that volcanic materials in the catchment are important suppliers of iron, sulfur and phosphorus. These elements influence primary productivity and play a role in microbial metabolism during early diagenesis. Authigenic processes led to the formation of pyrite framboids and revealed sulfate reduction. Anaerobic oxidation of methane and shifts in pore water ion concentration indicated microbial influence with depth. This study documents the presence of active microbes within the sediments and their relationship to changing environmental conditions. It also illustrates the substantial role played by microbes in the formation of Laguna Potrok Aike concretions. Thus, authigenic minerals can be used as biosignatures in these late Pleistocene maar sediment

The Conjoined Microprocessor

Over the last twenty years, the research community has devised sophisticated methods for retrieving secret information from sidechannel emanations, and for resisting such attacks. This paper introduces a new CPU architecture called the Conjoined Microprocessor. The Conjoined Microprocessor can randomly interleave the execution of two programs at very low extra hardware cost. We developed for the Conjoined Microprocessor a preprocessor tool that turns a target algorithm into two (or more) separate queues like $Q_0$ and $Q_1$ that can run in alternation. $Q_0$ and $Q_1$ fulfill the same operation as the original target algorithm. Power-analysis resistance is achieved by randomly alternating the execution of $Q_0$ and $Q_1$, with different runs resulting in different interleavings. Experiments reveal that this architecture is indeed effective against CPA

Public Health

OBJECTIVE: The objective of this review was to analyse how researchers conducting studies about mobile health applications (MHApps) effectiveness assess the conditions of this effectiveness. STUDY DESIGN: A scoping review according to PRIMSA-ScR checklist. METHODS: We conducted a scoping review of efficacy/effectiveness conditions in high internal validity studies assessing the efficacy of MHApps in changing physical activity behaviours and eating habits. We used the PubMed, Web of Science, SPORTDiscus and PsycINFO databases and processed the review according to the O'Malley and PRISMA-ScR recommendations. We selected studies with high internal validity methodologies (randomised controlled trials, quasi-experimental studies, systematic reviews and meta-analyses), dealing with dietary and/or physical activity behaviours; covering primary, secondary or tertiary prevention and dealing with behaviour change (uptake, maintenance). We excluded articles on MHApps relating to high-level sport and telemedicine. The process for selecting studies followed a set protocol with two authors who independently appraised the studies. RESULTS: Twenty-two articles were finally selected and analysed. We noted that the mechanisms and techniques to support behaviour changes were poorly reported and studied. There was no explanation of how these MHApps work and how they could be transferred or not. Indeed, the main efficacy conditions reported by authors refer to practical aspects of the tools. Moreover, the issue of social inequalities was essentially reduced to access to the technology (the shrinking access divide), and literacy was poorly studied, even though it is an important consideration in digital prevention. All in all, even when they dealt with behaviours, the evaluations were tool-focused rather than intervention-focused and did not allow a comprehensive assessment of MHApps. CONCLUSION: To understand the added value of MHApps in supporting behaviour changes, it seems important to draw on the paradigms relating to health technology assessment considering the characteristics of the technologies and on the evaluation of complex interventions considering the characteristics of prevention. This combined approach may help to clarify how these patient-focused MHApps work and is a condition for improved assessment of MHApps in terms of effectiveness, transferability and scalability