Weathering detection of granite from three asynchronous historical quarries of Sabrosa municipally (North Portugal)

Vale das Gatas granite is the main traditional building granite of Sabrosa municipality (North of Portugal). It is a two-mica granite porphyroid of coarse-medium crystal-size, characterised by the presence of pseudo-oriented phenocrystals of feldspars. Quarries deepen as extraction techniques evolve over time. They were shallow in the Iron Age, and the granite extracted from them is more weathered and has more developed exfoliation microcracks than the one extracted from medieval quarries, when new techniques allowed the extraction of deeper and fresher granites. Current quarries can go tens of meters deep and produce fresh granite, which is less weathered and has exfoliation microcracks that are less developed. Prehistoric, medieval and current quarries of the Vale das Gatas granite exist in Sabrosa municipality. Therefore, a great variety of monuments have been built with the same granite but with different weathering degrees. Replacement granite must have the same weathering degree as the original granite present in the monument to avoid different responses to the same decay agent. Different weathering degrees of Vale das Gatas granite were assessed by non-destructive techniques to correlate their physical properties with the weathering degree. Thus, in addition to a microscopic study, density, porosity, capillary water uptake, colour, ultrasonic pulse velocity and thermal properties were determined. These properties allowed determining the weathering degree of Vale das Gatas granite and correlating it with the original historical quarries. In this way, replacement granites can be obtained for future restorations

Composition And Porosity Study Of Original And Restoration Materials Included In A Coastal Historical Construction

The materials used for the building constructions can suffer during their life numerous deterioration processes induced by different anthropogenic and natural factors. For this reason, optimal restoration works are vitally necessary for a correct Built Heritage preservation process. One of the most critical environment is the marine atmosphere (marine aerosol impact following dry and wet depositions) where the climatic conditions are very aggressive. For this reason, the new building materials that will be used for a restoration must be selected taking into account the possible deterioration sources that are present in the vicinity of the building or construction. Among marine aerosol, other factors such as biodeterioration, water infiltrations, physical stress, even pollutants than can be deposited from the surrounding environment must be taken into account. This work is focused on the analytical and physical study of the different building materials used for the restoration works carried out in 2014 in the Tower of La Galea Fortress (Getxo, Basque Country, Spain), a historical construction placed in front of the sea. The analyzed materials were the weathered sandstone (original sandstone) and the one used to replace it (restoration sandstone), as well as restoration joint and rendering mortars. The results presented in this work offered a global idea of the correct material selection, taking into account the different factors that can affect the integrity of the whole building in the future. In order to test the durability of these materials against the surrounding environment, different analyses were carried out. On the one hand, X-ray Diffraction (XRD), Raman spectroscopy and Wavelength Dispersive X-ray fluorescence (WD-XRF) were used for chemical characterization of the materials. On the other hand, Mercury Intrusion Porosimetry (MIP) was used to understand the porous system and the thermal behavior was studied using Infrared Thermography (IRT). Finally, the thermal fatigue test was carried out to determine if temperature cycles could have impact in the structural integrity and aesthetic appearance (i.e. color changes) of these materials during time

Primary Angioplasty in a Catastrophic Presentation: Acute Left Main Coronary Total Occlusion—The ATOLMA Registry

Objectives. To determine the outcome predictors of in-hospital mortality in acute total occlusion of the left main coronary artery (ATOLMA) patients referred to emergent angioplasty and to describe the clinical presentation and the long-term outcome of these patients.Background. ATOLMA is an uncommon angiographic finding that usually leads to a catastrophic presentation. Limited and inconsistent data have been previously reported regarding true ATOLMA, yet comprehensive knowledge remains scarce.Methods. This is a multicenter retrospective cohort that includes patients presenting with myocardial infarction due to a confirmed ATOLMA who underwent emergency percutaneous coronary intervention (PCI).Results. In the period of the study, 7930 emergent PCI were performed in the five participating centers, and 46 of them had a true ATOLMA (0.58%). At admission, cardiogenic shock was present in 89% of patients, and cardiopulmonary resuscitation was required in 67.4%. All the patients had right dominance. Angiographic success was achieved in 80.4% of the procedures, 13 patients (28.2%) died during the catheterization, and the in-hospital mortality rate was 58.6% (27/46). At one-year and at the final follow-up, 18 patients (39%) were alive, including four cases successfully transplanted. Multivariate analysis showed that postprocedural TIMI flow was the only independent predictor of in-hospital mortality (OR 0.23, (95% CI 0.1-0.36),p<0.001).Conclusions. Our study confirms that the clinical presentation of ATOLMA is catastrophic, presenting a high in-hospital mortality rate; nevertheless, primary angioplasty in this setting is feasible. Postprocedural TIMI flow resulted as the only independent predictor of in-hospital mortality. In-hospital survivors presented an encouraging outcome. ATOLMA and left dominance could be incompatible with life

Understanding micro-processes of community building and mutual learning on Twitter: a ‘small data’ approach

This article contributes to an emerging field of ‘small data’ research on Twitter by presenting a case study of how teachers and students at a sixth-form college in the north of England used this social media platform to help construct a ‘community of practice’ that enabled micro-processes of recognition and mutual learning. Conducted as part of a broader action research project that focused on the ‘digital story circle’ as a site of, and for, narrative exchange and knowledge production, this study takes the form of a detailed analysis of a departmental Twitter account, combining basic quantitative metrics, close reading of selected Twitter data and qualitative interviews with teachers and students. Working with (and sometimes against) Twitter's platform architecture, teachers and students constructed, through distinct patterns of use, a shared space for dialogue that facilitated community building within the department. On the whole, they were able to overcome justified anxieties about professionalism and privacy; this was achieved by building on high levels of pre-existing trust among staff and by performing that mutual trust online through personal modes of communication. Through micro-processes of recognition and a breaking down of conventional hierarchies that affirmed students' agency as knowledge producers, the departmental Twitter account enabled mutual learning beyond curriculum and classroom. The significance of such micro-processes could only have been uncovered through the detailed scrutiny that a ‘small data’ approach to Twitter, in supplement to some obvious virtues of Big Data approaches, is particularly well placed to provide

Membrane electrode assemblies with low noble metal loadings for hydrogen production from solid polymer electrolyte water electrolysis

High performance membrane electrode assemblies (MEAs) with low noble metal loadings (NMLs) were developed for solid polymer electrolyte (SPE) water electrolysis. The electro- chemical and physical characterization of the MEAs was performed by IeV curves, elec- trochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Even though the total NML was lowered to 0.38 mg cm-2, it still reached a high performance of 1.633 V at 2 A cm-2 and 80 o C, with IrO2 as anode catalyst. The influences of the ionomer content in the anode catalyst layer (CL) and the cell temperature were investigated with the purpose of optimizing the performance. SEM and EIS measurements revealed that the MEA with low NML has very thin porous cathode and anode CLs that get intimate contact with the electrolyte membrane, which makes a reduced mass transport limitation and lower ohmic resistance of the MEA. A short-term water electrolysis operation at 1 A cm-2 showed that the MEA has good stability: the cell voltage maintained at ~1.60 V without distinct degradation after 122 h operation at 80 o C and atmospheric pressure.Web of Scienc

Membrane electrode assemblies with low noble metal loadings for hydrogen production from solid polymer electrolyte water electrolysis

High performance membrane electrode assemblies (MEAs) with low noble metal loadings (NMLs) were developed for solid polymer electrolyte (SPE) water electrolysis. The electro- chemical and physical characterization of the MEAs was performed by IeV curves, elec- trochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Even though the total NML was lowered to 0.38 mg cm-2, it still reached a high performance of 1.633 V at 2 A cm-2 and 80 o C, with IrO2 as anode catalyst. The influences of the ionomer content in the anode catalyst layer (CL) and the cell temperature were investigated with the purpose of optimizing the performance. SEM and EIS measurements revealed that the MEA with low NML has very thin porous cathode and anode CLs that get intimate contact with the electrolyte membrane, which makes a reduced mass transport limitation and lower ohmic resistance of the MEA. A short-term water electrolysis operation at 1 A cm-2 showed that the MEA has good stability: the cell voltage maintained at ~1.60 V without distinct degradation after 122 h operation at 80 o C and atmospheric pressure.Web of Scienc

Sleeping with the Enemy: How Intracellular Pathogens Cope with a Macrophage Lifestyle

Sleeping with the Enemy: How Intracellular Pathogens Cope with a Macrophage Lifestyl

Hydroxychloroquine is associated with a lower risk of polyautoimmunity: data from the RELESSER Registry

OBJECTIVES: This article estimates the frequency of polyautoimmunity and associated factors in a large retrospective cohort of patients with SLE. METHODS: RELESSER (Spanish Society of Rheumatology Lupus Registry) is a nationwide multicentre, hospital-based registry of SLE patients. This is a cross-sectional study. The main variable was polyautoimmunity, which was defined as the co-occurrence of SLE and another autoimmune disease, such as autoimmune thyroiditis, RA, scleroderma, inflammatory myopathy and MCTD. We also recorded the presence of multiple autoimmune syndrome, secondary SS, secondary APS and a family history of autoimmune disease. Multiple logistic regression analysis was performed to investigate possible risk factors for polyautoimmunity. RESULTS: Of the 3679 patients who fulfilled the criteria for SLE, 502 (13.6%) had polyautoimmunity. The most frequent types were autoimmune thyroiditis (7.9%), other systemic autoimmune diseases (6.2%), secondary SS (14.1%) and secondary APS (13.7%). Multiple autoimmune syndrome accounted for 10.2% of all cases of polyautoimmunity. A family history was recorded in 11.8%. According to the multivariate analysis, the factors associated with polyautoimmunity were female sex [odds ratio (95% CI), 1.72 (1.07, 2.72)], RP [1.63 (1.29, 2.05)], interstitial lung disease [3.35 (1.84, 6.01)], Jaccoud arthropathy [1.92 (1.40, 2.63)], anti-Ro/SSA and/or anti-La/SSB autoantibodies [2.03 (1.55, 2.67)], anti-RNP antibodies [1.48 (1.16, 1.90)], MTX [1.67 (1.26, 2.18)] and antimalarial drugs [0.50 (0.38, 0.67)]. CONCLUSION: Patients with SLE frequently present polyautoimmunity. We observed clinical and analytical characteristics associated with polyautoimmunity. Our finding that antimalarial drugs protected against polyautoimmunity should be verified in future studies