Thermal Conductivities of Unidirectional Materials

In this paper the composite thermal conductivities of unidirec tional composites are studied and expressions are obtained for pre dicting these conductivities in the directions along and normal to the filaments. In the direction along the filament an expression is presented based on the assumption that the filaments and matrix are connected in parallel. In the direction normal to the filaments composite thermal conductivity values are obtained first by utiliz ing the analogy between the response of a unidirectional composite to longitudinal shear loading and to transverse heat transfer; second by replacing the filament-matrix composite with an idealized ther mal model. The results of the shear loading analogy agree reason ably well with the results of the thermal model particularly at filament contents below about 60%. These results were also com pared to experimental data reported in the literature and good agreement was found between the data and those theoretical re sults that were derived for circular filaments arranged in a square packing array.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67863/2/10.1177_002199836700100206.pd

Multisensor 3D posture determination of a mobile robot using inertial and ultrasonic sensors

This paper presents methodologies and techniques for fusing inertial and ultrasonic sensors to estimate the current posture of a mobile robot navigating over indoor uneven terrain. This new type of pose tracking system is developed by means of fusing an inertial navigation subsystem (INS) and an ultrasonic localization subsystem. Extended Kalman filtering (EKF)-based algorithm for integrating both the subsystems is proposed to obtain reliable attitude and position estimates of the vehicle and to eliminate the accumulation errors caused by wheel slippage and surface roughness. Experimental results are conducted to illustrate feasibility and effectiveness of the proposed system and method

Correlating low energy impact damage with changes in modal parameters: a preliminary study on composite beams

This paper is an experimental study of the effects of multi-site damage on the vibration response of a composite beam damaged by low energy impact. The variation of the modal parameters with different levels of impact energy and density of impact is studied. Specimens are impacted symmetrically in order to induce a global rate of damage. A damage detection tool Damage Index is introduced in order to verify the estimation of damping ratios. Design of Experiments is used to establish the sensitivity of both energy of impact and density of damage. The DOE analysis results (using natural frequency only) indicate that impact energy for 2nd, 3rd and 4th bending modes is the most significant factor contributing to the changes in the modal parameters for this kind of symmetrical dynamic test

HuR binding to AU-rich elements present in the 3 ' untranslated region of Classical swine fever virus

Background: Classical swine fever virus (CSFV) is the member of the genus Pestivirus under the family Flaviviridae. The 5' untranslated region (UTR) of CSFV contains the IRES, which is a highly structured element that recruits the translation machinery. The 3' UTR is usually the recognition site of the viral replicase to initiate minus-strand RNA synthesis. Adenosine-uridine rich elements (ARE) are instability determinants present in the 3' UTR of short-lived mRNAs. However, the presence of AREs in the 3' UTR of CSFV conserved in all known strains has never been reported. This study inspects a possible role of the ARE in the 3' UTR of CSFV. Results: Using RNA pull-down and LC/MS/MS assays, this study identified at least 32 possible host factors derived from the cytoplasmic extracts of PK-15 cells that bind to the CSFV 3' UTR, one of which is HuR. HuR is known to bind the AREs and protect the mRNA from degradation. Using recombinant GST-HuR, this study demonstrates that HuR binds to the ARE present in the 3' UTR of CSFV in vitro and that the binding ability is conserved in strains irrespective of virulence. Conclusions: This study identified one of the CSFV 3' UTR binding proteins HuR is specifically binding to in the ARE region

Upregulation of Haploinsufficient Gene Expression in the Brain by Targeting a Long Non-coding RNA Improves Seizure Phenotype in a Model of Dravet Syndrome

AbstractDravet syndrome is a devastating genetic brain disorder caused by heterozygous loss-of-function mutation in the voltage-gated sodium channel gene SCN1A. There are currently no treatments, but the upregulation of SCN1A healthy allele represents an appealing therapeutic strategy. In this study we identified a novel, evolutionary conserved mechanism controlling the expression of SCN1A that is mediated by an antisense non-coding RNA (SCN1ANAT). Using oligonucleotide-based compounds (AntagoNATs) targeting SCN1ANAT we were able to induce specific upregulation of SCN1A both in vitro and in vivo, in the brain of Dravet knock-in mouse model and a non-human primate. AntagoNAT-mediated upregulation of Scn1a in postnatal Dravet mice led to significant improvements in seizure phenotype and excitability of hippocampal interneurons. These results further elucidate the pathophysiology of Dravet syndrome and outline a possible new approach for the treatment of this and other genetic disorders with similar etiology

Theoretical prediction of CNT-CF/PP composite tensile properties using various numerical modeling methods

Development of effective models to predict tensile properties of ‘carbon nanotube coated carbon fibre reinforced polypropylene (CNT-CF/PP)’ composites is briefly discussed. The composite taken as the reference is based on the highest growth mechanism of CNTs over carbon fibres. Halpin-Tsai and Combined Voigt-Reuss model has been implemented. Young's modulus for CNT-CF/PP composites has been found 4.5368 GPa and the tensile strength has been estimated 45.367 MPa considering the optimum operating condition of chemical vapor deposition (CVD) technique. Stiffness of the composite is represented through the stress-strain plots; stiffness is proportional to the steepness of the slope. There are slight deviations of results that have been found theoretically over the experimental issues

CP Phases in Correlated Production and Decay of Neutralinos in the Minimal Supersymmetric Standard Model

We investigate the associated production of neutralinos $e^+e^-\to\tilde{\chi}^0_1\tilde{\chi}^0_2$ accompanied by the neutralino leptonic decay $\tilde{\chi}^0_2\to\tilde{\chi}^0_1 \ell^+\ell^-$, taking into account initial beam polarization and production-decay spin correlations in the minimal supersymmetric standard model with general CP phases but without generational mixing in the slepton sector. The stringent constraints from the electron EDM on the CP phases are also included in the discussion. Initial beam polarizations lead to three CP--even distributions and one CP--odd distribution, which can be studied independently of the details of the neutralino decays. We find that the production cross section and the branching fractions of the leptonic neutralino decays are very sensitive to the CP phases. In addition, the production--decay spin correlations lead to several CP--even observables such as lepton invariant mass distribution, and lepton angular distribution, and one interesting T--odd (CP--odd) triple product of the initial electron momentum and two final lepton momenta, the size of which might be large enough to be measured at the high--luminosity future electron--positron collider or can play a complementary role in constraining the CP phases with the EDM constraints.Comment: Revtex, 37 pages, 12 eps figure

Limits on anomalous trilinear gauge boson couplings from WW, WZ and Wgamma production in pp-bar collisions at sqrt{s}=1.96 TeV

We present final searches of the anomalous gammaWW and ZWW trilinear gauge boson couplings from WW and WZ production using lepton plus dijet final states and a combination with results from Wgamma, WW, and WZ production with leptonic final states. The analyzed data correspond to up to 8.6/fb of integrated luminosity collected by the D0 detector in pp-bar collisions at sqrt{s}=1.96 TeV. We set the most stringent limits at a hadron collider to date assuming two different relations between the anomalous coupling parameters Delta\kappa_\gamma, lambda, and Delta g_1^Z for a cutoff energy scale Lambda=2 TeV. The combined 68% C.L. limits are -0.057<Delta\kappa_\gamma<0.154, -0.015<lambda<0.028, and -0.008<Delta g_1^Z<0.054 for the LEP parameterization, and -0.007<Delta\kappa<0.081 and -0.017<lambda<0.028 for the equal couplings parameterization. We also present the most stringent limits of the W boson magnetic dipole and electric quadrupole moments.Comment: 10 pages, 5 figures, submitted to PL

Measurement of the photon+b+b-jet production differential cross section in ppˉp\bar{p} collisions at \sqrt{s}=1.96~\TeV

We present measurements of the differential cross section dsigma/dpT_gamma for the inclusive production of a photon in association with a b-quark jet for photons with rapidities |y_gamma|< 1.0 and 30<pT_gamma <300 GeV, as well as for photons with 1.5<|y_gamma|< 2.5 and 30< pT_gamma <200 GeV, where pT_gamma is the photon transverse momentum. The b-quark jets are required to have pT>15 GeV and rapidity |y_jet| < 1.5. The results are based on data corresponding to an integrated luminosity of 8.7 fb^-1, recorded with the D0 detector at the Fermilab Tevatron $p\bar{p}$ Collider at sqrt(s)=1.96 TeV. The measured cross sections are compared with next-to-leading order perturbative QCD calculations using different sets of parton distribution functions as well as to predictions based on the kT-factorization QCD approach, and those from the Sherpa and Pythia Monte Carlo event generators.Comment: 10 pages, 9 figures, submitted to Phys. Lett.