An Enhanced Concave Program Relaxation for Choice Network Revenue Management

The network choice revenue management problem models customers as choosing from an offerset, and the firm decides the best subset to offer at any given moment to maximize expected revenue. The resulting dynamic program for the firm is intractable and approximated by a deterministic linear program called the CDLP which has an exponential number of columns. However, under the choice-set paradigm when the segment consideration sets overlap, the CDLP is difficult to solve. Column generation has been proposed but finding an entering column has been shown to be NP-hard. In this paper, starting with a concave program formulation based on segment-level consideration sets called SDCP, we add a class of valid inequalities called product cuts, that project onto subsets of intersections. In addition we propose a natural direct tightening of the SDCP called kSDCP, and compare the performance of both methods on the benchmark data sets in the literature. Both the product cuts and the kSDCP method are very simple and easy to implement, work with general discrete choice models and are applicable to the case of overlapping segment consideration sets. In our computational testing SDCP with product cuts achieves the CDLP value at a fraction of the CPU time taken by column generation and hence has the potential to be scalable to industrial-size problems

Evaluation of Leaf Spot Resistance in Wild \u3ci\u3eArachis\u3c/i\u3e Species of Section \u3ci\u3eArachis\u3c/i\u3e

Wild diploid Arachis species are potential sources of resistance to early (ELS) and late (LLS) leaf spot diseases caused by Passalora arachidicola (syn. Cercospora arachidicola Hori), and Nothopassalora personata (syn. Cercosporidium personatum (Berk. & Curt.) Deighton), respectively. Within section Arachis, limited information is available on the extent of genetic variation for resistance to these fungal pathogens. A collection of 78 accessions representing 15 wild species of Arachis section Arachis from the U.S peanut germplasm collection was evaluated for resistance to leaf spots. Screening was conducted under field (natural inoculum) conditions in Dawson, Georgia, during 2017 and 2018. Accessions differed significantly (P , 0.01) for all three disease variables evaluated, which included final defoliation rating, ELS lesion counts, and LLS lesion counts. Relatively high levels of resistance were identified for both diseases, with LLS being the predominant pathogen during the two years of evaluation. This research documents new sources of resistance to leaf spot diseases selected from an environment with high inoculum pressure. The presence of ELS and LLS enabled the selection of resistant germplasm for further introgression and pre-breeding

Communication: Molecular-level insights into asymmetric triblock copolymers: Network and phase development

Copyright (2014) AIP Publishing. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article appeared in Journal of Chemical Physics (Communication) 141 and may be found at http://dx.doi.org/10.1063/1.4896612Molecularly asymmetric triblock copolymers progressively grown from a parent diblock copolymer can be used to elucidate the phase and property transformation from diblock to network-forming triblock copolymer. In this study, we use several theoretical formalisms and simulation methods to examine the molecular-level characteristics accompanying this transformation, and show that reported macroscopic-level transitions correspond to the onset of an equilibrium network. Midblock conformational fractions and copolymer morphologies are provided as functions of copolymer composition and temperature.Nonwovens Institute at North Carolina State University and the Polish Ministry of Science and Higher Education (Grant No. N204 125039)

Effects of solubilizing surfactants and loading of antiviral, antimicrobial, and antifungal drugs on their release rates from ethylene vinyl acetate copolymer

This study investigates the effects of surfactants and drug loading on the drug release rate from ethylene vinyl acetate (EVA) copolymer. The release rate of nystatin from EVA was studied with addition of non-ionic surfactants Tween 60 and Cremophor RH 40. In addition, the effect of increasing drug load on the release rates of nystatin, chlorhexidine diacetate and acyclovir is also presented

Resistance to Thrips in Peanut and Implications for Management of Thrips and Thrips-Transmitted Orthotospoviruses in Peanut

Thrips are major pests of peanut (Arachis hypogaea L.) worldwide, and they serve as vectors of devastating orthotospoviruses such as Tomato spotted wilt virus (TSWV) and Groundnut bud necrosis virus (GBNV). A tremendous effort has been devoted to developing peanut cultivars with resistance to orthotospoviruses. Consequently, cultivars with moderate field resistance to viruses exist, but not much is known about host resistance to thrips. Integrating host plant resistance to thrips in peanut could suppress thrips feeding damage and reduce virus transmission, will decrease insecticide usage, and enhance sustainability in the production system. This review focuses on details of thrips resistance in peanut and identifies future directions for incorporating thrips resistance in peanut cultivars. Research on thrips–host interactions in peanut is predominantly limited to field evaluations of feeding damage, though, laboratory studies have revealed that peanut cultivars could differentially affect thrips feeding and thrips biology. Many runner type cultivars, field resistant to TSWV, representing diverse pedigrees evaluated against thrips in the greenhouse revealed that thrips preferred some cultivars over others, suggesting that antixenosis “non-preference” could contribute to thrips resistance in peanut. In other crops, morphological traits such as leaf architecture and waxiness and spectral reflectance have been associated with thrips non-preference. It is not clear if foliar morphological traits in peanut are associated with reduced preference or non-preference of thrips and need to be evaluated. Besides thrips non-preference, thrips larval survival to adulthood and median developmental time were negatively affected in some peanut cultivars and in a diploid peanut species Arachis diogoi (Hoehne) and its hybrids with a Virginia type cultivar, indicating that antibiosis (negative effects on biology) could also be a factor influencing thrips resistance in peanut. Available field resistance to orthotospoviruses in peanut is not complete, and cultivars can suffer substantial yield loss under high thrips and virus pressure. Integrating thrips resistance with available virus resistance would be ideal to limit losses. A discussion of modern technologies such as transgenic resistance, marker assisted selection and RNA interference, and future directions that could be undertaken to integrate resistance to thrips and to orthotospoviruses in peanut cultivars is included in this article

Hierarchical simulations of hybrid polymer-solid materials

Complex polymer-solid materials have gained a lot of attention during the last 2-3 decades due to the fundamental physical problems and the broad spectrum of technological applications in which they are involved. Therefore, significant progress concerning the simulations of such hybrid soft-hard nanostructured systems has been made in the last few years. Simulation techniques vary from quantum to microscopic (atomistic) up to mesoscopic (coarse-grained) level. Here we give a short overview of simulation approaches on model polymer-solid interfacial systems for all different levels of description. In addition, we also present a brief outlook concerning the open questions in this field, from the point of view of both physical problems and computational methodologies

An investigation of the interactions between an E. coli bacterial quorum sensing biosensor and chitosan-based nanocapsules

We examined the interaction between chitosan-based nanocapsules (NC), with average hydrodynamic diameter ∼114–155 nm, polydispersity ∼0.127, and ζ-potential ∼+50 mV, and an E. coli bacterial quorum sensing reporter strain. Dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) allowed full characterization and assessment of the absolute concentration of NC per unit volume in suspension. By centrifugation, DLS, and NTA, we determined experimentally a “stoichiometric” ratio of ∼80 NC/bacterium. By SEM it was possible to image the aggregation between NC and bacteria. Moreover, we developed a custom in silico platform to simulate the behavior of particles with diameters of 150 nm and ζ-potential of +50 mV on the bacterial surface. We computed the detailed force interactions between NC-NC and NC-bacteria and found that a maximum number of 145 particles might interact at the bacterial surface. Additionally, we found that the “stoichiometric” ratio of NC and bacteria has a strong influence on the bacterial behavior and influences the quorum sensing response, particularly due to the aggregation driven by NC

Analytical protocols for separation and electron microscopy of nanoparticles interacting with bacterial cells

An important step toward understanding interactions between nanoparticles (NPs) and bacteria is the ability to directly observe NPs interacting with bacterial cells. NPbacteria mixtures typical in nanomedicine, however, are not yet amendable for direct imaging in solution. Instead, evidence of NPcell interactions must be preserved in derivative (usually dried) samples to be subsequently revealed in high-resolution images, e.g., via scanning electron microscopy (SEM). Here, this concept is realized for a mixed suspension of model NPs and Staphylococcus aureus bacteria. First, protocols for analyzing the relative colloidal stabilities of NPs and bacteria are developed and validated based on systematic centrifugation and comparison of colony forming unit (CFU) counting and optical density (OD) measurements. Rate-dependence of centrifugation efficiency for each component suggests differential sedimentation at a specific predicted rate as an effective method for removing free NPs after co-incubation; the remaining fraction comprises bacteria with any associated NPs and can be examined, e.g., by SEM, for evidence of NPbacteria interactions. These analytical protocols, validated by systematic control experiments and high-resolution SEM imaging, should be generally applicable for investigating NPbacteria interactions.financial support from the following sources: grant SFRH/BPD/47693/2008 from the Portuguese Foundation for Science and Technology (FCT); FCT Strategic Project PEst-OE/EQB/LA0023/2013; project “BioHealth Biotechnology and Bioengineering approaches to improve health quality”, Ref. NORTE-07-0124-FEDER-000027, cofunded by the Programa Operacional Regional do Norte (ON.2−O Novo Norte), QREN, FEDER; project “Consolidating Research Expertise and Resources on Cellular and Molecular Biotechnology at CEB/IBB”, ref. FCOMP-01-0124-FEDER- 027462

Hollow mesoporous silica nanoparticles for intracellular delivery of fluorescent dye

In this study, hollow mesoporous silica nanoparticles (HMSNs) were synthesized using the sol-gel/emulsion approach and its potential application in drug delivery was assessed. The HMSNs were characterized, by transmission electron microscopy (TEM), Scanning Electron Microscopy (SEM), nitrogen adsorption/desorption and Brunauer-Emmett-Teller (BET), to have a mesoporous layer on its surface, with an average pore diameter of about 2 nm and a surface area of 880 m2/g. Fluorescein isothiocyanate (FITC) loaded into these HMSNs was used as a model platform to assess its efficacy as a drug delivery tool. Its release kinetic study revealed a sequential release of FITC from the HMSNs for over a period of one week when soaked in inorganic solution, while a burst release kinetic of the dye was observed just within a few hours of soaking in organic solution. These FITC-loaded HMSNs was also found capable to be internalized by live human cervical cancer cells (HeLa), wherein it was quickly released into the cytoplasm within a short period of time after intracellular uptake. We envision that these HMSNs, with large pores and high efficacy to adsorb chemicals such as the fluorescent dye FITC, could serve as a delivery vehicle for controlled release of chemicals administered into live cells, opening potential to a diverse range of applications including drug storage and release as well as metabolic manipulation of cells