732 research outputs found
Energy localization on q-tori, long term stability and the interpretation of FPU recurrences
We focus on two approaches that have been proposed in recent years for the
explanation of the so-called FPU paradox, i.e. the persistence of energy
localization in the `low-q' Fourier modes of Fermi-Pasta-Ulam nonlinear
lattices, preventing equipartition among all modes at low energies. In the
first approach, a low-frequency fraction of the spectrum is initially excited
leading to the formation of `natural packets' exhibiting exponential stability,
while in the second, emphasis is placed on the existence of `q-breathers', i.e
periodic continuations of the linear modes of the lattice, which are
exponentially localized in Fourier space. Following ideas of the latter, we
introduce in this paper the concept of `q-tori' representing exponentially
localized solutions on low-dimensional tori and use their stability properties
to reconcile these two approaches and provide a more complete explanation of
the FPU paradox.Comment: 38 pages, 7 figure
Stability of axial orbits in galactic potentials
We investigate the dynamics in a galactic potential with two reflection
symmetries. The phase-space structure of the real system is approximated with a
resonant detuned normal form constructed with the method based on the Lie
transform. Attention is focused on the stability properties of the axial
periodic orbits that play an important role in galactic models. Using energy
and ellipticity as parameters, we find analytical expressions of bifurcations
and compare them with numerical results available in the literature.Comment: 20 pages, accepted for publication on Celestial Mechanics and
Dynamical Astronom
Particle interactions with single or multiple 3D solar reconnecting current sheets
The acceleration of charged particles (electrons and protons) in flaring
solar active regions is analyzed by numerical experiments. The acceleration is
modelled as a stochastic process taking place by the interaction of the
particles with local magnetic reconnection sites via multiple steps. Two types
of local reconnecting topologies are studied: the Harris-type and the X-point.
A formula for the maximum kinetic energy gain in a Harris-type current sheet,
found in a previous work of ours, fits well the numerical data for a single
step of the process. A generalization is then given approximating the kinetic
energy gain through an X-point. In the case of the multiple step process, in
both topologies the particles' kinetic energy distribution is found to acquire
a practically invariant form after a small number of steps. This tendency is
interpreted theoretically. Other characteristics of the acceleration process
are given, such as the mean acceleration time and the pitch angle distributions
of the particles.Comment: 18 pages, 9 figures, Solar Physics, in pres
Recommended from our members
The Merit(nTOF-11) High Intensity Liquid Mercury Target Experiment at the CERN PS
The MERIT(nTOF-11) experiment is a proof-ofprinciple test of a target system for a high power proton beam to be used as front-end for a neutrino factory or a muon collider. The experiment took data in autumn 2007 with the fast-extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of per pulse. The target system, based on a free mercury jet, is capable of intercepting a 4-MW proton beam inside a 15-T magnetic field required to capture the low energy secondary pions as the source for intense muon beams. Partice detectors installed around the target setup measure the secondary particle flux out of the target and can probe cavitation effects in the mercury jet when excited by an intense proton beam.Preliminary results of the data analysis will be presented here
High intensity neutrino oscillation facilities in Europe
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ− beams in a storage ring. The far detector in this case is a 100 kt magnetized iron neutrino detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular He6 and Ne18, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive
A Feasibility Experiment of a W-powder Target
The development of high‐powertargetsremains a key R&D actvity for future facilities presently under study like the Neutrino Factory, Muon Collider or upgraded high‐power super beams for long‐baseline neutrino experiments. The choice of materials to sustain the beam power ranging up to MW levels is not trivial.Granular solid targets have been proposed and are being studied as a candidate for such high-power target systems. In the recently commissioned HiRadMat facility at CERN, a feasibility experiment of a tungsten powder target was performed. The experiment was designed to explore for first time the impact of a high‐power proton beam on a static W powder target in a thimble configuration. The diagnostics of the experiment were based on remote high‐speed photography as well as on laser‐doppler vibration measurements of the target containers. Results from the experimental findings are presented in this poster
Time Structure of Particle Production in the Merit High-Power Target Experiment
The MERIT experiment is a proof-of-principle test of a target system for high power proton beam to be used as front-end for a neutrino factory complex or amuon collider. The experiment took data in autumn 2007 with the fast extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of about 30 × 1012 protons per pulse. We report results from the portion of the MERIT experiment in which separated beam pulses were delivered to a free mercury jet target with time intervals between pulses varying from 2 to 700 μs. The analysis is based on the responses of particle detectors placed along side and downstream of the target
NA61/SHINE facility at the CERN SPS: beams and detector system
NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose
experimental facility to study hadron production in hadron-proton,
hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton
Synchrotron. It recorded the first physics data with hadron beams in 2009 and
with ion beams (secondary 7Be beams) in 2011.
NA61/SHINE has greatly profited from the long development of the CERN proton
and ion sources and the accelerator chain as well as the H2 beamline of the
CERN North Area. The latter has recently been modified to also serve as a
fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous
components of the NA61/SHINE set-up were inherited from its predecessors, in
particular, the last one, the NA49 experiment. Important new detectors and
upgrades of the legacy equipment were introduced by the NA61/SHINE
Collaboration.
This paper describes the state of the NA61/SHINE facility - the beams and the
detector system - before the CERN Long Shutdown I, which started in March 2013
Laboratory realization of relativistic pair-plasma beams
Relativistic electron-positron plasmas are ubiquitous in extreme astrophysical environments such as black-hole and neutron-star magnetospheres, where accretion-powered jets and pulsar winds are expected to be enriched with electron-positron pairs. Their role in the dynamics of such environments is in many cases believed to be fundamental, but their behavior differs significantly from typical electron-ion plasmas due to the matter-antimatter symmetry of the charged components. So far, our experimental inability to produce large yields of positrons in quasi-neutral beams has restricted the understanding of electron-positron pair plasmas to simple numerical and analytical studies, which are rather limited. We present the first experimental results confirming the generation of high-density, quasi-neutral, relativistic electron-positron pair beams using the 440 GeV/c beam at CERN’s Super Proton Synchrotron (SPS) accelerator. Monte Carlo simulations agree well with the experimental data and show that the characteristic scales necessary for collective plasma behavior, such as the Debye length and the collisionless skin depth, are exceeded by the measured size of the produced pair beams. Our work opens up the possibility of directly probing the microphysics of pair plasmas beyond quasi-linear evolution into regimes that are challenging to simulate or measure via astronomical observations
- …