338 research outputs found
Austenite in Transformation-Induced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments
The thermodynamic limit to the progress of the bainite reaction in steels containing a cementite inhibitor often leaves large quantities of thermally or mechanically unstable austenite. Such austenite is not effective in delaying the onset of plastic instabilities during the course of deformation. In such circumstances, it is useful to conduct isothermal transformation at a high temperature where the rate of reaction is relatively rapid, followed by a lower temperature step that permits more bainite to be generated. This in turn increases the stability of the refined austenite, which then transforms gently over a large range of strain during a tensile test. A significant corollary is that the two-step heat treatments are unnecessary in low-carbon steels, where the bainite reaction is able to proceed to a greater extent before reaching the thermodynamic limit. Furthermore, the two-step process can be counterproductive in low carbon steel, because the austenite content is reduced to a level below which it does not enhance the mechanical properties. Other circumstances in which multiple heat treatments are necessary are also discussed.The authors are grateful to POSCO for support through Steel
Innovation Programme, and to the World Class University Programme of the National
Research Foundation of Korea, Ministry of Education, Science and Technology, project
number R32-2008-000-10147.This is the accepted manuscript version. The final published version is available from Springer at http://link.springer.com/article/10.1007%2Fs11661-014-2405-z
Global Search for New Physics with 2.0/fb at CDF
Data collected in Run II of the Fermilab Tevatron are searched for
indications of new electroweak-scale physics. Rather than focusing on
particular new physics scenarios, CDF data are analyzed for discrepancies with
the standard model prediction. A model-independent approach (Vista) considers
gross features of the data, and is sensitive to new large cross-section
physics. Further sensitivity to new physics is provided by two additional
algorithms: a Bump Hunter searches invariant mass distributions for "bumps"
that could indicate resonant production of new particles; and the Sleuth
procedure scans for data excesses at large summed transverse momentum. This
combined global search for new physics in 2.0/fb of ppbar collisions at
sqrt(s)=1.96 TeV reveals no indication of physics beyond the standard model.Comment: 8 pages, 7 figures. Final version which appeared in Physical Review D
Rapid Communication
Observation of Orbitally Excited B_s Mesons
We report the first observation of two narrow resonances consistent with
states of orbitally excited (L=1) B_s mesons using 1 fb^{-1} of ppbar
collisions at sqrt{s} = 1.96 TeV collected with the CDF II detector at the
Fermilab Tevatron. We use two-body decays into K^- and B^+ mesons reconstructed
as B^+ \to J/\psi K^+, J/\psi \to \mu^+ \mu^- or B^+ \to \bar{D}^0 \pi^+,
\bar{D}^0 \to K^+ \pi^-. We deduce the masses of the two states to be m(B_{s1})
= 5829.4 +- 0.7 MeV/c^2 and m(B_{s2}^*) = 5839.7 +- 0.7 MeV/c^2.Comment: Version accepted and published by Phys. Rev. Let
Design and implementation of electronics and data acquisition system for Ultra-Fast Flash Observatory
The Ultra-Fast Flash Observatory (UFFO) Pathfinder for Gamma-Ray Bursts (GRBs) consists
of two telescopes. The UFFO Burst Alert & Trigger Telescope (UBAT) handles the
detection and localization of GRBs, and the Slewing Mirror Telescope (SMT) conducts the
measurement of the UV/optical afterglow. UBAT is equipped with an X-ray detector, analog
and digital signal readout electronics that detects X-rays from GRBs and determines the
location. SMT is equipped with a stepping motor and the associated electronics to rotate
the slewing mirror targeting the GRBs identified by UBAT. First the slewing mirror points
to a GRB, then SMT obtains the optical image of the GRB using the intensified CCD and its
readout electronics. The UFFO Data Acquisition system (UDAQ) is responsible for the
overall function and operation of the observatory and the communication with the satellite
main processor. In this paper we present the design and implementation of the electronics
of UBAT and SMT as well as the architecture and implementation of UDAQ
Development of Motorized Slewing Mirror Stage for the UFFO Project
The Ultra-Fast Flash Observatory (UFFO) is a space observatory for optical follow-ups of
gamma ray bursts (GRBs), aiming to explore the first 60 seconds of GRBs optical emission.
UFFO is utilized to catch early optical emissions from GRBs within few sec after trigger
using a Gimbal mirror which redirects the optical path rather than slewing entire
spacecraft. We have developed a 15 cm two-axis Gimbal mirror stage for the UFFO-Pathfinder
which is going to be on board the Lomonosov satellite which is to be launched in 2013. The
stage is designed for fast and accurate motion with given budgets of 3 kg of mass and 3
Watt of power. By employing stepping motors, the slewing mirror can rotate faster than 15
deg/sec so that objects in the UFFO coverage (60 deg × 60 deg) can be targeted in
~1 sec. The obtained targeting resolution is better 2 arcmin using a close-loop
control with high precision rotary encoder. In this presentation, we will discuss details
of design, manufacturing, space qualification tests, as well as performance tests
Calibration and Simulation of the GRB trigger detector of the Ultra Fast Flash Observatory
The UFFO (Ultra-Fast Flash Observatory) is a GRB detector on board the Lomonosov
satellite, to be launched in 2013. The GRB trigger is provided by an X-ray detector,
called UBAT (UFFO Burst Alarm & Trigger Telescope), which detects X-rays from the GRB
and then triggers to determine the direction of the GRB and then alerts the Slewing Mirror
Telescope (SMT) to turn in the direction of the GRB and record the optical photon fluxes.
This report details the calibration of the two components: the MAPMTs and the YSO crystals
and simulations of the UBAT. The results shows that this design can observe a GRB within a
field of view of ±35° and can trigger in a time scale as short as 0.2 – 1.0 s
after the appearance of a GRB X-ray spike
In-Flight Calibrations of UFFO-Pathfinder
The Ultra-Fast Flash Observatory (UFFO), which will be launched onboard the
Lomonosov spacecraft, contains two crucial instruments: UFFO Burst
Alert & Trigger Telescope (UBAT) for detection and localization of Gamma-Ray Bursts
(GRBs) and the fast-response Slewing Mirror Telescope (SMT) designed for the observation
of the prompt optical/UV counterparts. Here we discuss the in-space calibrations of the
UBAT detector and SMT telescope. After the launch, the observations of the standard X-ray
sources such as pulsar in Crab nebula will provide data for necessary calibrations of
UBAT. Several standard stars will be used for the photometric calibration of SMT. The
celestial X-ray sources, e.g. X-ray binaries with bright optical sources
in their close angular vicinity will serve for the cross-calibration of UBAT and SMT
Search for charged Higgs bosons in decays of top quarks in p-pbar collisions at sqrt(s) = 1.96 TeV
7 pages, 2 figuresWe report the recent charged Higgs search in top quark decays in 2.2/fb CDF data. This is the first attempt to search for charged Higgs using fully reconstructed mass assuming H->c-sbar in small tan beta region. No evidence of a charged Higgs is observed in the CDF data, hence 95% upper limits are placed at B(t->H+b)We report on the first direct search for charged Higgs bosons decaying into cs̅ in tt̅ events produced by pp̅ collisions at √s=1.96  TeV. The search uses a data sample corresponding to an integrated luminosity of 2.2  fb-1 collected by the CDF II detector at Fermilab and looks for a resonance in the invariant mass distribution of two jets in the lepton+jets sample of tt̅ candidates. We observe no evidence of charged Higgs bosons in top quark decays. Hence, 95% upper limits on the top quark decay branching ratio are placed at B(t→H+b)< 0.1 to 0.3 for charged Higgs boson masses of 60 to 150  GeV/c2 assuming B(H+→cs̅ )=1.0. The upper limits on B(t→H+b) are also used as model-independent limits on the decay branching ratio of top quarks to generic scalar charged bosons beyond the standard model.Peer reviewe
Measurement of the ttbar Production Cross Section in ppbar collisions at sqrt s = 1.96 TeV in the All Hadronic Decay Mode
We report a measurement of the ttbar production cross section using the
CDF-II detector at the Fermilab Tevatron. The analysis is performed using 311
pb-1 of ppbar collisions at sqrt(s)=1.96 TeV. The data consist of events
selected with six or more hadronic jets with additional kinematic requirements.
At least one of these jets must be identified as a b-quark jet by the
reconstruction of a secondary vertex. The cross section is measured to be
sigma(tbart)=7.5+-2.1(stat.)+3.3-2.2(syst.)+0.5-0.4(lumi.) pb, which is
consistent with the standard model prediction.Comment: By CDF collaboratio
- …