210 research outputs found

    Benthic foraminiferal Mn / Ca ratios reflect microhabitat preferences

    Get PDF
    The Mn / Ca of calcium carbonate tests of living (rose-Bengal-stained) benthic foraminifera (Elphidium batialis, Uvigerina spp., Bolivina spissa, Nonionellina labradorica and Chilostomellina fimbriata) were determined in relation to pore water manganese (Mn) concentrations for the first time along a bottom water oxygen gradient across the continental slope along the NE Japan margin (western Pacific). The local bottom water oxygen (BWO) gradient differs from previous field study sites focusing on foraminiferal Mn / Ca and redox chemistry, therefore allowing further resolution of previously observed trends. The Mn / Ca ratios were analysed using laser ablation inductively coupled plasma-mass spectrometer (ICP-MS), allowing single-chamber determination of Mn / Ca. The incorporation of Mn into the carbonate tests reflects environmental conditions and is not influenced by ontogeny. The inter-species variability in Mn / Ca reflected foraminiferal in-sediment habitat preferences and associated pore water chemistry but also showed large interspecific differences in Mn partitioning. At each station, Mn / Ca ratios were always lower in the shallow infaunal E. batialis, occupying relatively oxygenated sediments, compared to intermediate infaunal species, Uvigerina spp. and B. spissa, which were typically found at greater depth, under more reducing conditions. The highest Mn / Ca was always recorded by the deep infaunal species N. labradorica and C. fimbriata. Our results suggest that although partitioning differs, Mn / Ca ratios in the intermediate infaunal taxa are promising tools for palaeoceanographic reconstructions as their microhabitat exposes them to higher variability in pore water Mn, thereby making them relatively sensitive recorders of redox conditions and/or bottom water oxygenation.Peer reviewe

    Absolute seasonal temperature estimates from clumped isotopes in bivalve shells suggest warm and variable greenhouse climate

    Get PDF
    Seasonal variability in sea surface temperatures plays a fundamental role in climate dynamics and species distribution. Seasonal bias can also severely compromise the accuracy of mean annual temperature reconstructions. It is therefore essential to better understand seasonal variability in climates of the past. Many reconstructions of climate in deep time neglect this issue and rely on controversial assumptions, such as estimates of sea water oxygen isotope composition. Here we present absolute seasonal temperature reconstructions based on clumped isotope measurements in bivalve shells which, critically, do not rely on these assumptions. We reconstruct highly precise monthly sea surface temperatures at around 50 °N latitude from individual oyster and rudist shells of the Campanian greenhouse period about 78 million years ago, when the seasonal range at 50 °N comprised 15 to 27 °C. In agreement with fully coupled climate model simulations, we find that greenhouse climates outside the tropics were warmer and more seasonal than previously thought. We conclude that seasonal bias and assumptions about seawater composition can distort temperature reconstructions and our understanding of past greenhouse climates

    Monitoring of a sediment plume produced by a deep-sea mining test in shallow water, Málaga Bight, Alboran Sea (southwestern Mediterranean Sea)

    Get PDF
    In this study different experimental designs for monitoring of sediment plumes produced by deep-sea mining are presented. Plumes of sediment stirred up from the seabed by mining machines are considered to represent a major environmental pressure which may extend far beyond the actual mining area. Two industry field tests with the scaled mining vehicle Apollo II of Royal IHC conducted in a relatively shallow setting offshore southern Spain provided valuable insights for anticipated monitoring of nodule mining activities in the deep Pacific. Although the tests were performed in only 300 m water depth, much less than the depth where future deep-sea mining will take place, the weakly stratified bottom water, tide-dominated near-bed currents with mean magnitude of around 5–10 cm s−1, and gently sloping seabed covered with fine muddy sediment provide a good analogue to operational conditions in the deep sea. The plume of suspended sediment mobilised by the mining vehicle was monitored with turbidity sensors deployed on a ship-operated CTD system and on a static array of moored sensors and monitored visually using a ship-operated ROV. It was found that the generated sediment plume extended no >2 m above the seabed close to the source (<100 m) but increased in height at greater distance. Furthermore, turbidity values decreased rapidly with increasing distance to the source. Even though plume monitoring suffered interference from bottom trawling activities in neighbouring areas, a distinct turbidity signal generated by the mining equipment could still be distinguished above background turbidity at 350 m away from the source. From the experience gained in shallow water, recommendations are made on how a combination of sensors operated from moving and moored platforms may be a suitable and successful strategy for monitoring man-made sediment plumes in the deep sea

    Pterosaurs from the late Cretaceous of Angola

    Get PDF
    Here, we describe the first pterosaur remains from Angola, an assemblage of fourteen bones from the Lower Maastrichtian marine deposits of Bentiaba, Namibe Province. One new species is introduced, Epapatelo otyikokolo, gen. et sp. nov., which comprises an articulated partial left humerus and ulna as well as an articulated left ulna and radius (from a second individual). Phylogenetic analysis confirms a non-nyctosaurid pteranodontian attribution for this new taxon and supports a new apomorphy-based clade, Aponyctosauria, which is here defined. Late Cretaceous pteranodontians are rare in Sub-Saharan Africa and throughout the Southern Hemisphere. Preliminary histological analysis also reveals a likely sub-adult age for one of the specimens. This fossil assemblage provides a first glimpse of Angolan pterosaur paleobiodiversity providing further insight into the Gondwanan ecosystems of the Upper Cretaceous

    Calibration of the oxygen and clumped isotope thermometers for (proto-)dolomite based on synthetic and natural carbonates

    Get PDF
    Dolomite is a very common carbonate mineral in ancient sediments, but is rarely found in modern environments. Because of the difficulties in precipitating dolomite in the laboratory at low temperatures, the controls on its formation are still debated after more than two centuries of research. Two important parameters to constrain the environment of dolomitization are the temperature of formation and the oxygen isotope composition of the fluid from which it precipitated. Carbonate clumped isotopes (expressed with the parameter Δ47) are increasingly becoming the method of choice to obtain this information. However, whereas many clumped isotope studies treated dolomites the same way as calcite, some recent studies observed a different phosphoric acid fractionation for Δ47 during acid digestion of dolomite compared to calcite. This causes additional uncertainties in the Δ47 temperature estimates for dolomites analyzed in different laboratories using different acid digestion temperatures. To tackle this problem we present here a (proto-)dolomite-specific Δ47-temperature calibration from 25 to 1100 °C for an acid reaction temperature of 70 °C and anchored to widely available calcite standards. For the temperature range 25 to 220 °C we obtain a linear Δ47-T relationship based on 289 individual measurements with R2 of 0.864: [Formula presented] Tin Kelvin When including two isotopically scrambled dolomites at 1100 °C, the best fit is obtained with a third order polynomial temperature relationship (R2 = 0.924): [Formula presented]. Applying a calcite Δ47-T relationship produced under identical laboratory conditions results in 3 to 16 °C colder calculated formation temperatures for dolomites (with formation temperature from 0 to 100 °C) than using the (proto-)dolomite specific calibration presented here. For the synthetic samples formed between 70 and 220 °C we also determined the temperature dependence of the oxygen isotope fractionation relative to the water. Based on the similarity between our results and two other recent studies (Vasconcelos et al., 2005 and Horita, 2014) we propose that a combination of the three datasets represents the most robust calibration for (proto-)dolomite formed in a wide temperature range from 25 to 350 °C. 103αCaMg−carbonates−Water=2.9923±0.0557×[Formula presented]−2.3592±0.4116 Because of the uncertainties in the phosphoric acid oxygen and clumped isotope fractionation for (proto-)dolomite, we promote the use of three samples that are available in large amounts as possible inter-laboratory reference material for oxygen and clumped isotope measurements. A sample of the middle Triassic San Salvatore dolomite from southern Switzerland, the NIST SRM 88b dolomite standard already reported in other Δ47 studies and a lacustrine Pliocene dolomite from La Roda (Spain). This study demonstrates the necessity to apply (proto-)dolomite specific Δ47-T relationships for accurate temperature estimates of dolomite formation, ideally done at identical acid digestion temperatures to avoid additional uncertainties introduced by acid digestion temperature corrections. In addition, the simultaneous analyses of dolomite reference material will enable a much better comparison of published dolomite clumped and oxygen isotope data amongst different laboratories

    Changes in ultrastructural features of the foraminifera Ammonia spp. in response to anoxic conditions: Field and laboratory observations

    Get PDF
    The ultrastructure of the living foraminiferan, Ammonia sp. (phylotype unknown), collected from surficial and deeper, subsurface (anoxic) sediments from the Dutch Wadden Sea, was examined to provide information on the physiology of the foraminiferal cell and its adaptive strategies to low‑oxygen conditions. The observed changes in cell ultrastructure under anoxia were further compared with the cell ultrastructure of Ammonia sp. (phylotype T6), from oxic and anoxic incubation experiments. The ultrastructural evidence indicates that under low‑oxygen conditions Ammonia spp. may accumulate lipid droplets. In addition, the size of the lipid droplets may increase with the duration of anoxic conditions, becoming over 5 μm in size, while the remaining cytosol of the foraminiferan become less electron dense. In some specimens, lipid droplets were also found in the space between the plasma membrane and the organic lining. We expect that the apparent increase in the number and size of the lipid droplets is indicative of a stress response of the foraminifera to the adverse anoxic conditions. Other ultrastructural changes in response to anoxia include the presence of intact bacteria and electron dense opaque bodies within the foraminiferal cytosol, and a possible thickening of the organic lining. The role of the bacteria remains enigmatic but they may be linked to foraminiferal dormancy in anoxia

    Stable isotope record of Triceratops from a mass accumulation (Lance Formation, Wyoming, USA) provides insights into Triceratops behaviour and ecology

    Get PDF
    Our understanding of Late Cretaceous dinosaur ecosystems from North America has considerably improved through stable isotope analyses on fossil bones and teeth. Oxygen and carbon stable isotopic compositions of structurally-bound carbonate in these fossil apatites are commonly used to infer variations of ingested water and food sources, which are in turn related to environmental and climatic conditions. Incremental isotopic records potentially provide insights into seasonality and migratory behaviour. So far, these reconstructions are based on vertebrate remains from spatiotemporally diverse datasets. Here, we present oxygen (δ18O) and carbon (δ13C) isotopic records from a large, spatially and temporally well-constrained, Triceratops bonebed from the Upper Maastrichtian Lance Formation (eastern Wyoming. USA). These isotopic compositions allow to elucidate the palaeoecology of these large herbivores and their ecosystem in detail, as well as their habitat use, diet and possible migration. The δ18O signature from incrementally sampled Triceratops teeth reveal relatively low intra-tooth variation (average 1.3 ‰), comparable to contemporaneous dinosaur species as well as modern herbivorous mammals. Average δ13C values (−5.4 ‰) are somewhat higher than for modern C3 plant grazers, and hint towards complex interactions during carbon uptake by non-avian herbivorous dinosaurs. Calculated δ18O of drinking water (−14.8 ‰) combined with the local sedimentology of fine-grained siliciclastic deposits with high total organic and low carbonate contents strongly suggest a freshwater environment. Additionally, the combined average δ18O and δ13C Triceratops isotope signatures indicate a living environment intermediate between inland forests and coastal floodplains, expanding on earlier theories of ornithischian niche partitioning. Our robust dataset provides meaningful tests of habitat and palaeoecological hypotheses for Triceratops, and highlights the application of spatiotemporally well-constrained fossil remains

    Between local zones and MN units: A new inter-basinal rodent zonation for the late Neogene of Spain

    Get PDF
    Since the appearance of the first major magnetostratigraphic studies covering the late Neogene of Spain (e.g., Opdyke et al., 1997; Garcés et al., 1998) the number of Spanish continental sections with a correlation to the Geomagnetic Time Scale has steadily grown. Nonetheless, well-calibrated sections with a dense record are still rare, between-basin biostratigraphic correlation is not straightforward, and ages of uncalibrated sites are poorly constrained. Given the overall similarity of rodent assemblages between Iberian basins during the interval MN11–MN17 (9–2 Ma), the definition of a system of Iberian rodent zones for this interval is a logical and necessary step leading to improved correlations. Our revision thus entails the integration of local biozonations into a single Iberian biostratigraphic framework. The inferred series of zone boundary ages are used to improve the age estimates for most Iberian micromammal sites. The chronological backbone in our approach is formed by the available Iberian magnetochronologic records (Teruel, Cabriel, Júcar, Jumilla-La Celia, Fortuna and Guadix-Baza Basins). After analyzing similarities in taxonomic composition and turnover across basins with a defined biozonation (Teruel, Bajo Segura, Alcoy, Granada and Guadix-Baza Basins), 15 Iberian biozones were defined for the 9–2 Ma interval. Age uncertainty intervals for each boundary and for most Iberian micromammal sites were inferred using additional information on local sedimentation and/or evolutionary rates. Among our results are new ages for the latest Tortonian and earliest Messinian (MN12–MN13 transition, 8–7 Ma), a thus far poorly dated interval on the Iberian Peninsula. The new chronology for this interval is based on the integrated stratigraphic records of the Jumilla-La Celia and Teruel Basins. Sections in the Jumilla-La Celia basin (eastern Betic Cordillera; Van Balen et al., 2015) were sampled paleomagnetically, further constraining the ages of various MN12-correlative sites (Van Dam et al., 2014). Finally, regular bedding patterns in sections near Concud in the Teruel Basin (eastern Central Spain) were interpreted cyclostratigraphically and used as a tool in addition to magnetostratigraphy for dating several classical and newly sampled MN12-correlative mammal sites in the area

    Environmental factors influencing benthic communities in the oxygen minimum zones on the Angolan and Namibian margins

    Get PDF
    Thriving benthic communities were observed in the oxygen minimum zones along the southwestern African margin. On the Namibian margin, fossil cold-water coral mounds were overgrown by sponges and bryozoans, while the Angolan margin was characterized by cold-water coral mounds covered by a living coral reef. To explore why benthic communities differ in both areas, present-day environmental conditions were assessed, using conductivity–temperature–depth (CTD) transects and bottom landers to investigate spatial and temporal variations of environmental properties. Near-bottom measurements recorded low dissolved oxygen concentrations on the Namibian margin of 0–0.15 mL L−1 (≜0 %–9 % saturation) and on the Angolan margin of 0.5–1.5 mL L−1 (≜7 %–18 % saturation), which were associated with relatively high temperatures (11.8–13.2 ∘C and 6.4–12.6 ∘C, respectively). Semidiurnal barotropic tides were found to interact with the margin topography producing internal waves. These tidal movements deliver water with more suitable characteristics to the benthic communities from below and above the zone of low oxygen. Concurrently, the delivery of a high quantity and quality of organic matter was observed, being an important food source for the benthic fauna. On the Namibian margin, organic matter originated directly from the surface productive zone, whereas on the Angolan margin the geochemical signature of organic matter suggested an additional mechanism of food supply. A nepheloid layer observed above the cold-water corals may constitute a reservoir of organic matter, facilitating a constant supply of food particles by tidal mixing. Our data suggest that the benthic fauna on the Namibian margin, as well as the cold-water coral communities on the Angolan margin, may compensate for unfavorable conditions of low oxygen levels and high temperatures with enhanced availability of food, while anoxic conditions on the Namibian margin are at present a limiting factor for cold-water coral growth. This study provides an example of how benthic ecosystems cope with such extreme environmental conditions since it is expected that oxygen minimum zones will expand in the future due to anthropogenic activities

    Targeting the mesolithic: Interdisciplinary approaches to archaeological prospection inthe Brown Bank area, southern North Sea

    Get PDF
    YesThis paper describes some results of the research undertaken over the Brown Bank area during recent (2018/2019) geoarchaeological surveys in the North Sea which included seismic imaging, shallow (vibro)coring and dredging. It examines the benefits of simultaneous high-resolution (0.5 – 1m) and ultra-high-resolution (10 – 20cm) seismic survey techniques and a staged approach to resolving the submerged Holocene landscape in the highest possible detail for the purpose of targeted prospecting for archaeological material from the Mesolithic landscape of Doggerland. The materials recovered from such surveys offer significantly greater information due to an enhanced understanding of the context in which they were recovered. The importance of this information cannot be understated archaeologically, as few locations on land provide the opportunity to recover archaeological finds in situ within preserved landscapes. Moreover, it allows offshore areas of potential human activity to be prospected with some certainty of success.ER
    • …
    corecore