98 research outputs found
Yield response of field beans (Vicia faba) to plant population and sowing date in a temperate climate
peer-reviewedSowing date and seed rate influence crop establishment, growth, yield and profitability. The growth and yield of field beans (Vicia faba) in response to sowing date and seed rate was examined over three seasons, 2016–2019, in Teagasc, Oak Park, Carlow, Ireland. Early winter sowings (October) established better than late winter sowings in November and January. No significant difference was found in establishment from mid-February to mid-March. Yield was generally highest from October sowings for the winter cultivar. Yields were similar from February, March and April sowings for the spring cultivar, with March generally yielding higher across the three seasons. Yield was also found to increase significantly with seed rate for both winter and spring cultivars. The economic optimum plant population was estimated for the October and March sowing dates, by fitting a standard (linear + exponential) curve. There is no published information on the optimum plant populations for field beans in Ireland and we believe we are the first to report these findings. The estimated economic optimum plant populations varied between 13 and 38 plants/m2 for both varieties, with an average optimum of 25.5 plants/m2. This range falls within the current recommendations for sowing field beans in Ireland, demonstrating that increasing plant populations above the current commercial practice for field beans in Ireland, will not increase yield or profitability
Wheat straw availability for bioenergy in England
In an effort to meet energy demands while reducing carbon emissions, crop residues, such as wheat straw, have been investigated for their use as feedstock for biofuel production. In order to identify the feasibility of utilising crop residues as bioenergy feedstock, a postal survey was conducted to determine current farm business wheat straw use, destination and potential future supply. The survey responses showed a bias towards larger, more commercially-minded farms, therefore capturing a large area of straw production. Results demonstrated a wide range of responses to both current straw use and potential for the supply of straw to different markets in the future. Interestingly, even for a very generous payment for straw, 28.5% of straw currently chopped and incorporated would not be sold, suggesting that straw supply for bioenergy feedstock is likely to be more limited than previously assumed. However, higher prices for straw would encourage farmers to explore ways of increasing straw yield
Impacts of zero tillage on soil enzyme activities, microbial characteristics and organic matter functional chemistry in temperate soils
Zero tillage management of agricultural soils has potential for enhancing soil carbon (C) storage and reducing greenhouse gas emissions. However, the mechanisms which control carbon (C) sequestration in soil in response to zero tillage are not well understood. The aim of this study was to investigate the links between zero tillage practices and the functioning of the soil microbial community with regards to C cycling, testing the hypothesis that zero tillage enhances biological functioning in soil with positive implications for C sequestration. Specifically, we determined microbial respiration rates, enzyme activities, carbon source utilization and the functional chemistry of the soil organic matter in temperate well drained soils that had been zero tilled for seven years against annually tilled soils. Zero tilled soils contained 9% more soil C, 30% higher microbial biomass C than tilled soil and an increased presence of aromatic functional groups indicating greater preservation of recalcitrant C. Greater CO2 emission and higher respirational quotients were observed from tilled soils compared to zero tilled soils while microbial biomass was 30% greater in zero tilled soils indicating a more efficient functioning of the microbial community under zero tillage practice. Furthermore, microbial enzyme activities of dehydrogenase, cellulase, xylanase, β-glucosidase, phenol oxidase and peroxidase were higher in zero tilled soils. Considering zero tillage enhanced both microbial functioning and C storage in soil, we suggest that it offers significant promise to improve soil health and support mitigation measures against climate change
Measurement of the branching fraction
The branching fraction is measured in a data sample
corresponding to 0.41 of integrated luminosity collected with the LHCb
detector at the LHC. This channel is sensitive to the penguin contributions
affecting the sin2 measurement from The
time-integrated branching fraction is measured to be . This is the most precise measurement to
date
Measurement of the CP-violating phase \phi s in Bs->J/\psi\pi+\pi- decays
Measurement of the mixing-induced CP-violating phase phi_s in Bs decays is of
prime importance in probing new physics. Here 7421 +/- 105 signal events from
the dominantly CP-odd final state J/\psi pi+ pi- are selected in 1/fb of pp
collision data collected at sqrt{s} = 7 TeV with the LHCb detector. A
time-dependent fit to the data yields a value of
phi_s=-0.019^{+0.173+0.004}_{-0.174-0.003} rad, consistent with the Standard
Model expectation. No evidence of direct CP violation is found.Comment: 15 pages, 10 figures; minor revisions on May 23, 201
Absolute luminosity measurements with the LHCb detector at the LHC
Absolute luminosity measurements are of general interest for colliding-beam
experiments at storage rings. These measurements are necessary to determine the
absolute cross-sections of reaction processes and are valuable to quantify the
performance of the accelerator. Using data taken in 2010, LHCb has applied two
methods to determine the absolute scale of its luminosity measurements for
proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In
addition to the classic "van der Meer scan" method a novel technique has been
developed which makes use of direct imaging of the individual beams using
beam-gas and beam-beam interactions. This beam imaging method is made possible
by the high resolution of the LHCb vertex detector and the close proximity of
the detector to the beams, and allows beam parameters such as positions, angles
and widths to be determined. The results of the two methods have comparable
precision and are in good agreement. Combining the two methods, an overall
precision of 3.5% in the absolute luminosity determination is reached. The
techniques used to transport the absolute luminosity calibration to the full
2010 data-taking period are presented.Comment: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6,
9 and 10 and corresponding explanation in the tex
Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) and the direct CP asymmetry in B0 -> K*0 gamma
The ratio of branching fractions of the radiative B decays B0 -> K*0 gamma
and Bs0 phi gamma has been measured using an integrated luminosity of 1.0 fb-1
of pp collision data collected by the LHCb experiment at a centre-of-mass
energy of sqrt(s)=7 TeV. The value obtained is BR(B0 -> K*0 gamma)/BR(Bs0 ->
phi gamma) = 1.23 +/- 0.06(stat.) +/- 0.04(syst.) +/- 0.10(fs/fd), where the
first uncertainty is statistical, the second is the experimental systematic
uncertainty and the third is associated with the ratio of fragmentation
fractions fs/fd. Using the world average value for BR(B0 -> K*0 gamma), the
branching fraction BR(Bs0 -> phi gamma) is measured to be (3.5 +/- 0.4) x
10^{-5}.
The direct CP asymmetry in B0 -> K*0 gamma decays has also been measured with
the same data and found to be A(CP)(B0 -> K*0 gamma) = (0.8 +/- 1.7(stat.) +/-
0.9(syst.))%.
Both measurements are the most precise to date and are in agreement with the
previous experimental results and theoretical expectations.Comment: 21 pages, 3 figues, 4 table
Absolute luminosity measurements with the LHCb detector at the LHC
Absolute luminosity measurements are of general interest for colliding-beam
experiments at storage rings. These measurements are necessary to determine the
absolute cross-sections of reaction processes and are valuable to quantify the
performance of the accelerator. Using data taken in 2010, LHCb has applied two
methods to determine the absolute scale of its luminosity measurements for
proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In
addition to the classic "van der Meer scan" method a novel technique has been
developed which makes use of direct imaging of the individual beams using
beam-gas and beam-beam interactions. This beam imaging method is made possible
by the high resolution of the LHCb vertex detector and the close proximity of
the detector to the beams, and allows beam parameters such as positions, angles
and widths to be determined. The results of the two methods have comparable
precision and are in good agreement. Combining the two methods, an overall
precision of 3.5% in the absolute luminosity determination is reached. The
techniques used to transport the absolute luminosity calibration to the full
2010 data-taking period are presented.Comment: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6,
9 and 10 and corresponding explanation in the tex
Absolute luminosity measurements with the LHCb detector at the LHC
Absolute luminosity measurements are of general interest for colliding-beam
experiments at storage rings. These measurements are necessary to determine the
absolute cross-sections of reaction processes and are valuable to quantify the
performance of the accelerator. Using data taken in 2010, LHCb has applied two
methods to determine the absolute scale of its luminosity measurements for
proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In
addition to the classic "van der Meer scan" method a novel technique has been
developed which makes use of direct imaging of the individual beams using
beam-gas and beam-beam interactions. This beam imaging method is made possible
by the high resolution of the LHCb vertex detector and the close proximity of
the detector to the beams, and allows beam parameters such as positions, angles
and widths to be determined. The results of the two methods have comparable
precision and are in good agreement. Combining the two methods, an overall
precision of 3.5% in the absolute luminosity determination is reached. The
techniques used to transport the absolute luminosity calibration to the full
2010 data-taking period are presented.Comment: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6,
9 and 10 and corresponding explanation in the tex
First observation of the decay and a measurement of the ratio of branching fractions
The first observation of the decay using
data collected by the LHCb detector at a centre-of-mass energy of 7 TeV,
corresponding to an integrated luminosity of 36 pb, is reported. A
signal of events is obtained and the absence of signal is
rejected with a statistical significance of more than nine standard deviations.
The branching fraction is measured relative to
that of : , where the first uncertainty is statistical, the second systematic and
the third is due to the uncertainty on the ratio of the and
hadronisation fractions.Comment: 10 pages, 3 figures, submitted to Phys. Lett. B; ISSN 0370-269
- …