2,968 research outputs found

    A Gaussian Model for Simulated Geomagnetic Field Reversals

    Full text link
    Field reversals are the most spectacular changes in the geomagnetic field but remain little understood. Paleomagnetic data primarily constrain the reversal rate and provide few additional clues. Reversals and excursions are characterized by a low in dipole moment that can last for some 10kyr. Some paleomagnetic records also suggest that the field decreases much slower before an reversals than it recovers afterwards and that the recovery phase may show an overshoot in field intensity. Here we study the dipole moment variations in several extremely long dynamo simulation to statistically explored the reversal and excursion properties. The numerical reversals are characterized by a switch from a high axial dipole moment state to a low axial dipole moment state. When analysing the respective transitions we find that decay and growth have very similar time scales and that there is no overshoot. Other properties are generally similar to paleomagnetic findings. The dipole moment has to decrease to about 30% of its mean to allow for reversals. Grand excursions during which the field intensity drops by a comparable margin are very similar to reversals and likely have the same internal origin. The simulations suggest that both are simply triggered by particularly large axial dipole fluctuations while other field components remain largely unaffected. A model at a particularly large Ekman number shows a second but little Earth-like type of reversals where the total field decays and recovers after some time

    A hemispherical dynamo model : Implications for the Martian crustal magnetization

    Full text link
    Mars Global Surveyor measurements revealed that the Martian crust is strongly magnetized in the southern hemisphere while the northern hemisphere is virtually void of magnetization. Two possible reasons have been suggested for this dichotomy: A once more or less homogeneously magnetization may have been destroyed in the northern hemisphere by, for example, resurfacing or impacts. The alternative theory we further explore here assumes that the dynamo itself produced a hemispherical field. We use numerical dynamo simulations to study under which conditions a spatial variation of the heat flux through the core-mantle boundary (CMB) may yield a strongly hemispherical surface field. We assume that the early Martian dynamo was exclusively driven by secular cooling and we mostly concentrate on a cosine CMB heat flux pattern with a minimum at the north pole, possibly caused by the impacts responsible for the northern lowlands. This pattern consistently triggers a convective mode which is dominated by equatorially anti-symmetric and axisymmetric (EAA) thermal winds. Convective up- and down-wellings and thus radial magnetic field production then tend to concentrate in the southern hemisphere which is still cooled efficiently while the northern hemisphere remains hot. The dynamo changes from an alpha^2- for a homogeneous CMB heat flux to an alpha-Omega-type in the hemispherical configuration. These dynamos reverse on time scales of about 10 kyrs. This too fast to allow for the more or less unidirectional magnetization of thick crustal layer required to explain the strong magnetization in the southern hemisphere

    Penetrative Convection in Partly Stratified Rapidly Rotating Spherical Shells

    Get PDF
    Celestial objects host interfaces between convective and stable stratified interior regions. The interaction between both, e.g., the transfer of heat, mass, or angular momentum depends on whether and how flows penetrate into the stable layer. Powered from the unstable, convective regions, radial flows can pierce into the stable region depending on their inertia (overshooting). In rapidly rotating systems, the dynamics are strongly influenced by the Coriolis force and radial flows penetrate in stratified regions due to the geostrophic invariance of columnar convection even in the limit of vanishing inertia. Within this study, we numerically investigate both mechanisms and hence explore the nature of penetrative convection in rapidly rotating spherical shells. The study covers a broad range of system parameters, such as the strength of the stratification relative to the Coriolis force or the inertia. Guided by the application to Saturn, we model a sandwiched stable stratified layer (SSL) surrounded by two convective zones. A comprehensive analysis of the damping behavior of convective flows at the edges of the SSL showed that the mean penetration depth is controlled by the ratio of stratified and unstratified buoyancy gradients and is hence independent of rotation. A scaling law is derived and suggests that the penetration depth decreases with the square root of the ratio of unstabilizing and stabilizing entropy gradients. The influence of the Coriolis force, however, is evident by a modulation of the penetration depth along latitude, since convective columns are elongated vertically and hence pierce predominantly into the SSL around mid-latitudes and outside the tangent cylinder. Our result also show that the penetration depth decreases linearly with the flow length scale (low pass filter), confirming predictions from the linear theory of rotating partially stratified convection

    Scaling regimes in spherical shell rotating convection

    Full text link
    Rayleigh-B\'enard convection in rotating spherical shells can be considered as a simplified analogue of many astrophysical and geophysical fluid flows. Here, we use three-dimensional direct numerical simulations to study this physical process. We construct a dataset of more than 200 numerical models that cover a broad parameter range with Ekman numbers spanning 3×10−7≤E≤10−13\times 10^{-7} \leq E \leq 10^{-1}, Rayleigh numbers within the range 103<Ra<2×101010^3 < Ra < 2\times 10^{10} and a Prandtl number unity. We investigate the scaling behaviours of both local (length scales, boundary layers) and global (Nusselt and Reynolds numbers) properties across various physical regimes from onset of rotating convection to weakly-rotating convection. Close to critical, the convective flow is dominated by a triple force balance between viscosity, Coriolis force and buoyancy. For larger supercriticalities, a subset of our numerical data approaches the asymptotic diffusivity-free scaling of rotating convection Nu∼Ra3/2E2Nu\sim Ra^{3/2}E^{2} in a narrow fraction of the parameter space delimited by 6 Rac≤Ra≤0.4 E−8/56\,Ra_c \leq Ra \leq 0.4\,E^{-8/5}. Using a decomposition of the viscous dissipation rate into bulk and boundary layer contributions, we establish a theoretical scaling of the flow velocity that accurately describes the numerical data. In rapidly-rotating turbulent convection, the fluid bulk is controlled by a triple force balance between Coriolis, inertia and buoyancy, while the remaining fraction of the dissipation can be attributed to the viscous friction in the Ekman layers. Beyond Ra≃E−8/5Ra \simeq E^{-8/5}, the rotational constraint on the convective flow is gradually lost and the flow properties vary to match the regime changes between rotation-dominated and non-rotating convection. The quantity RaE12/7Ra E^{12/7} provides an accurate transition parameter to separate rotating and non-rotating convection.Comment: 42 pages, 20 figures, 3 tables, accepted for publication in JF

    Reversal and amplification of zonal flows by boundary enforced thermal wind

    Full text link
    Zonal flows in rapidly-rotating celestial objects such as the Sun, gas or ice giants form in a variety of surface patterns and amplitudes. Whereas the differential rotation on the Sun, Jupiter and Saturn features a super-rotating equatorial region, the ice giants, Neptune and Uranus harbour an equatorial jet slower than the planetary rotation. Global numerical models covering the optically thick, deep-reaching and rapidly rotating convective envelopes of gas giants reproduce successfully the prograde jet at the equator. In such models, convective columns shaped by the dominant Coriolis force typically exhibit a consistent prograde tilt. Hence angular momentum is pumped away from the rotation axis via Reynolds stresses. Those models are found to be strongly geostrophic, hence a modulation of the zonal flow structure along the axis of rotation, e.g. introduced by persistent latitudinal temperature gradients, seems of minor importance. Within our study we stimulate these thermal gradients and the resulting ageostrophic flows by applying an axisymmetric and equatorially symmetric outer boundary heat flux anomaly (Y20Y_{20}) with variable amplitude and sign. Such a forcing pattern mimics the thermal effect of intense solar or stellar irradiation. Our results suggest that the ageostrophic flows are linearly amplified with the forcing amplitude q⋆q^\star leading to a more pronounced dimple of the equatorial jet (alike Jupiter). The geostrophic flow contributions, however, are suppressed for weak q⋆q^\star, but inverted and re-amplified once q⋆q^\star exceeds a critical value. The inverse geostrophic differential rotation is consistently maintained by now also inversely tilted columns and reminiscent of zonal flow profiles observed for the ice giants. Analysis of the main force balance and parameter studies further foster these results

    Zonal flow scaling in rapidly-rotating compressible convection

    Full text link
    The surface winds of Jupiter and Saturn are primarily zonal. Each planet exhibits strong prograde equatorial flow flanked by multiple alternating zonal winds at higher latitudes. The depth to which these flows penetrate has long been debated and is still an unsolved problem. Previous rotating convection models that obtained multiple high latitude zonal jets comparable to those on the giant planets assumed an incompressible (Boussinesq) fluid, which is unrealistic for gas giant planets. Later models of compressible rotating convection obtained only few high latitude jets which were not amenable to scaling analysis. Here we present 3-D numerical simulations of compressible convection in rapidly-rotating spherical shells. To explore the formation and scaling of high-latitude zonal jets, we consider models with a strong radial density variation and a range of Ekman numbers, while maintaining a zonal flow Rossby number characteristic of Saturn. All of our simulations show a strong prograde equatorial jet outside the tangent cylinder. At low Ekman numbers several alternating jets form in each hemisphere inside the tangent cylinder. To analyse jet scaling of our numerical models and of Jupiter and Saturn, we extend Rhines scaling based on a topographic β\beta-parameter, which was previously applied to an incompressible fluid in a spherical shell, to compressible fluids. The jet-widths predicted by this modified Rhines length are found to be in relatively good agreement with our numerical model results and with cloud tracking observations of Jupiter and Saturn.Comment: 17 pages, 12 figures, 3 tables, accepted for publication in PEP

    Turbulent Rayleigh-B\'enard convection in spherical shells

    Full text link
    We simulate numerically Boussinesq convection in non-rotating spherical shells for a fluid with a unity Prandtl number and Rayleigh numbers up to 10910^9. In this geometry, curvature and radial variations of the gravitationnal acceleration yield asymmetric boundary layers. A systematic parameter study for various radius ratios (from η=ri/ro=0.2\eta=r_i/r_o=0.2 to η=0.95\eta=0.95) and gravity profiles allows us to explore the dependence of the asymmetry on these parameters. We find that the average plume spacing is comparable between the spherical inner and outer bounding surfaces. An estimate of the average plume separation allows us to accurately predict the boundary layer asymmetry for the various spherical shell configurations explored here. The mean temperature and horizontal velocity profiles are in good agreement with classical Prandtl-Blasius laminar boundary layer profiles, provided the boundary layers are analysed in a dynamical frame, that fluctuates with the local and instantaneous boundary layer thicknesses. The scaling properties of the Nusselt and Reynolds numbers are investigated by separating the bulk and boundary layer contributions to the thermal and viscous dissipation rates using numerical models with η=0.6\eta=0.6 and a gravity proportional to 1/r21/r^2. We show that our spherical models are consistent with the predictions of Grossmann \& Lohse's (2000) theory and that Nu(Ra)Nu(Ra) and Re(Ra)Re(Ra) scalings are in good agreement with plane layer results.Comment: 43 pages, 25 figures, 2 tables, accepted for publication in JF

    Zonal flow regimes in rotating anelastic spherical shells: an application to giant planets

    Full text link
    The surface zonal winds observed in the giant planets form a complex jet pattern with alternating prograde and retrograde direction. While the main equatorial band is prograde on the gas giants, both ice giants have a pronounced retrograde equatorial jet. We use three-dimensional numerical models of compressible convection in rotating spherical shells to explore the properties of zonal flows in different regimes where either rotation or buoyancy dominates the force balance. We conduct a systematic parameter study to quantify the dependence of zonal flows on the background density stratification and the driving of convection. We find that the direction of the equatorial zonal wind is controlled by the ratio of buoyancy and Coriolis force. The prograde equatorial band maintained by Reynolds stresses is found in the rotation-dominated regime. In cases where buoyancy dominates Coriolis force, the angular momentum per unit mass is homogenised and the equatorial band is retrograde, reminiscent to those observed in the ice giants. In this regime, the amplitude of the zonal jets depends on the background density contrast with strongly stratified models producing stronger jets than comparable weakly stratified cases. Furthermore, our results can help to explain the transition between solar-like and "anti-solar" differential rotations found in anelastic models of stellar convection zones. In the strongly stratified cases, we find that the leading order force balance can significantly vary with depth (rotation-dominated inside and buoyancy-dominated in a thin surface layer). This so-called "transitional regime" has a visible signature in the main equatorial jet which shows a pronounced dimple where flow amplitudes notably decay towards the equator. A similar dimple is observed on Jupiter, which suggests that convection in the planet interior could possibly operate in this regime.Comment: 20 pages, 15 figures, 4 tables, accepted for publication in Icaru

    Anelastic dynamo models with variable electrical conductivity: an application to gas giants

    Full text link
    The observed surface dynamics of Jupiter and Saturn is dominated by a banded system of zonal winds. Their depth remains unclear but they are thought to be confined to the very outer envelopes where hydrogen remains molecular and the electrical conductivity is small. The dynamo maintaining the dipole-dominated magnetic fields of both gas giants likely operates in the deeper interior where hydrogen assumes a metallic state. Here, we present numerical simulations that attempt to model both the zonal winds and the interior dynamo action in an integrated approach. Using the anelastic version of the MHD code MagIC, we explore the effects of density stratification and radial electrical conductivity variation. The electrical conductivity is mostly assumed to remain constant in the thicker inner metallic region and it decays exponentially towards the outer boundary throughout the molecular envelope. Our results show that the combination of stronger density stratification and weaker conducting outer layer is essential for reconciling dipole dominated dynamo action and a fierce equatorial zonal jet. Previous simulations with homogeneous electrical conductivity show that both are merely exclusive, with solutions either having strong zonal winds and multipolar magnetic fields or weak zonal winds and dipole-dominated magnetic fields. All jets tend to be geostrophic and therefore reach right through the convective shell in our simulations. The particular setup explored here allows a strong equatorial jet to remain confined to the weaker conducting outer region where it does not interfere with the deeper seated dynamo action. The flanking mid to high latitude jets, on the other hand, have to remain faint to yield a strongly dipolar magnetic field. The fiercer jets on Jupiter and Saturn only seem compatible with the observed dipolar fields when they remain confined to a weaker conducting outer layer.Comment: 16 pages, 11 figures, 2 tables, submitted to PEP
    • …
    corecore