28 research outputs found
Seasonal changes in pore water pressure in a grass covered cut slope in London clay
In temperate European climates, the season of peak water demand by vegetation (summer) is out of phase with the season of greatest rainfall (winter). This results in seasonal fluctuations in soil water content and, in clay soils, associated problems of shrinking and swelling that can in turn contribute to strain-softening and progressive slope failure. This paper presents field measurements of seasonal moisture content and pore water pressure changes within the surface drying zone of a cut slope in the London Clay at Newbury, Berkshire, UK. A climate station was installed at the site to measure the parameters needed to determine specific plant evapotranspiration. This information was used to carry out a water balance calculation to estimate the year-round soil moisture deficit caused by the vegetation. The calculated soil moisture deficit matches reasonably closely the field measurements of soil drying. The field measurements of seasonal changes in pore water pressure and suction are linked quantitatively to the measured changes in water content using the soil water characteristic curve for the London Clay. The suctions generated by the light vegetation cover at Newbury were found not to persist into the winter and early spring
Forecast climate change impact on pore-water pressure regimes for the design and assessment of clay earthworks
Understanding and mitigating the impact of climate change on the built environment is becoming increasingly important worldwide. Earthworks (embankments and cuttings) supporting road and rail transportation networks often have direct contact with the atmosphere and are therefore influenced by extreme weather events and seasonal weather patterns. Atmospheric wetting and drying alters pore-water pressures (PWP) within earthworks, potentially contributing to the deformation and failure of earthwork slopes. Consequently, it is essential to understand the influence of climate change on PWPs within earthwork slopes, to inform strategies for their design, assessment and maintenance. Extensive one-dimensional seepage analyses were carried out for typical railway embankments in the London area. The analyses showed that forecast hotter, drier summers will increase the water storage capacity of earthworks. This will lead to increased net infiltration in the winter months due to both a forecast increase in rainfall, and a longer time being required to saturate the soil pores and bring the water table back to the slope surface. Hence, despite the forecast increase in winter rainfall, this will not lead to higher design PWP regimes. The analyses were conducted for the London area, but the methodology and conceptual framework can be readily adapted for other locations
Challenges in monitoring and managing engineered slopes in a changing climate
Geotechnical asset owners need to know which parts of their asset network are vulnerable to climate change induced failure in order to optimise future investment. Protecting these vulnerable slopes requires monitoring systems capable of identifying and alerting to asset operators changes in the internal conditions that precede failure. Current monitoring systems are heavily reliant on point sensors which can be difficult to interpret across slope scale. This paper presents challenges to producing such a system and research being carried out to address some of these using electrical resistance tomography (ERT). Experimental results show that whilst it is possible to measure soil water content indirectly via resistivity the relationship between resistivity and water content will change over time for a given slope. If geotechnical parameters such as pore water pressure are to be estimated using this method then ERT systems will require integrating with more conventional geotechnical instrumentation to ensure correct representative information is provided. The paper also presents examples of how such data can be processed and communicated to asset owners for the purposes of asset management
Current and future role of instrumentation and monitoring in the performance of transport infrastructure slopes
Instrumentation is often used to monitor the performance of engineered infrastructure slopes. This paper looks at the current role of instrumentation and monitoring, including the reasons for monitoring infrastructure slopes, the instrumentation typically installed and parameters measured. The paper then investigates recent developments in technology and considers how these may change the way that monitoring is used in the future, and tries to summarize the barriers and challenges to greater use of instrumentation in slope engineering. The challenges relate to economics of instrumentation within a wider risk management system, a better understanding of the way in which slopes perform and/or lose performance, and the complexities of managing and making decisions from greater quantities of data
Mathematical and computational modelling of vegetated soil incorporating hydraulically-driven finite strain deformation
In this paper a new model for the hydro-mechanical behaviour of rooted soils is developed. It is a physically-based model that couples finite strain soil deformation with unsaturated water and air flow, while improving on existing cohesion-based approaches to mechanical root reinforcement and empirical soil water-uptake approaches typically used to deal with rooted slopes. The model is used to show that the dynamics of soil-water pressure and soil deformation depend strongly on the physics of the root-water uptake and the elasto-plastic soil mechanics. Root water uptake can cause suctions and corresponding soil shrinkage sufficiently large to necessitate a finite-strain approach. Although this deformation can change the intrinsic permeability, hydraulic conductivity remains dominated by the water content. The model incorporates simultaneous air-flow, but this is shown to be unimportant for soil-water dynamics under the conditions assumed in example simulations. The mechanical action of roots is incorporated via a root stress tensor and a simulation is used to show how root tension is mobilised within a swelling soil. The developed model may be used to simulate both laboratory experiments and full-scale vegetated slopes
Challenges in monitoring and managing engineered slopes in a changing climate
© 2016 The Authors. Geotechnical asset owners need to know which parts of their asset network are vulnerable to climate change induced failure in order to optimise future investment. Protecting these vulnerable slopes requires monitoring systems capable of identifying and alerting to asset operators changes in the internal conditions that precede failure. Current monitoring systems are heavily reliant on point sensors which can be difficult to interpret across slope scale. This paper presents challenges to producing such a system and research being carried out to address some of these using electrical resistance tomography (ERT). Experimental results show that whilst it is possible to measure soil water content indirectly via resistivity the relationship between resistivity and water content will change over time for a given slope. If geotechnical parameters such as pore water pressure are to be estimated using this method then ERT systems will require integrating with more conventional geotechnical instrumentation to ensure correct representative information is provided. The paper also presents examples of how such data can be processed and communicated to asset owners for the purposes of asset management
Scaling of the reinforcement of soil slopes by living plants in a geotechnical centrifuge
The research described here in was funded by a EPSRC (EP/M020355/1) project in collaboration with the University of Dundee, the University of Southampton, the University of Aberdeen, the Durham University and The James Hutton Institute. The authors thank Professor Mike Humphreys (IBERS, Aberystwyth University) and Scotia seeds for providing seeds used in this study and Dr Gary Callon (University of Dundee) for arranging indoor growing area. The James Hutton Institute receives funding from the Scottish Government (Rural & Environmental Services & Analytical Services Division).Peer reviewedPublisher PD
25 Years of Self-organized Criticality: Concepts and Controversies
Introduced by the late Per Bak and his colleagues, self-organized criticality (SOC) has been one of the most stimulating concepts to come out of statistical mechanics and condensed matter theory in the last few decades, and has played a significant role in the development of complexity science. SOC, and more generally fractals and power laws, have attracted much comment, ranging from the very positive to the polemical. The other papers (Aschwanden et al. in Space Sci. Rev., 2014, this issue; McAteer et al. in Space Sci. Rev., 2015, this issue; Sharma et al. in Space Sci. Rev. 2015, in preparation) in this special issue showcase the considerable body of observations in solar, magnetospheric and fusion plasma inspired by the SOC idea, and expose the fertile role the new paradigm has played in approaches to modeling and understanding multiscale plasma instabilities. This very broad impact, and the necessary process of adapting a scientific hypothesis to the conditions of a given physical system, has meant that SOC as studied in these fields has sometimes differed significantly from the definition originally given by its creators. In Bak’s own field of theoretical physics there are significant observational and theoretical open questions, even 25 years on (Pruessner 2012). One aim of the present review is to address the dichotomy between the great reception SOC has received in some areas, and its shortcomings, as they became manifest in the controversies it triggered. Our article tries to clear up what we think are misunderstandings of SOC in fields more remote from its origins in statistical mechanics, condensed matter and dynamical systems by revisiting Bak, Tang and Wiesenfeld’s original papers
Validation of a spatial-temporal soil water movement and plant water uptake model
Management and irrigation of plants increasingly relies on accurate mathematical models for the movement of water within unsaturated soils. Current models often use values for water content and soil parameters that are averaged over the soil profile. However, many applications require models to more accurately represent the soil–plant–atmosphere continuum, in particular, water movement and saturation within specific parts of the soil profile. In this paper a mathematical model for water uptake by a plant root system from unsaturated soil is presented. The model provides an estimate of the water content level within the soil at different depths, and the uptake of water by the root system. The model was validated using field data, which include hourly water content values at five different soil depths under a grass/herb cover over 1 year, to obtain a fully calibrated system for plant water uptake with respect to climate conditions. When compared quantitatively to a simple water balance model, the proposed model achieves a better fit to the experimental data due to its ability to vary water content with depth. To accurately model the water content in the soil profile, the soil water retention curve and saturated hydraulic conductivity needed to vary with depth