GROWTH AND SIMULATION STUDY OF GAN ON V-GROOVE PATTERNED SILICON (100) SUBSTRATES AND ITS APPLICATIONS

Master'sMASTER OF ENGINEERIN

An Analysis and Design of the Redirection Schema in ForCES

The idea of Forwarding and Control Element Separation has widely accepted by next generation network researchers, the regain attention of IETF (The Internet Engineering Task Force) ForCES (Forwarding and Control Element Separation) is the best proof. An IP tunnel-based redirection schema was proposed to solve the problem of routing protocol messages interaction between ForCES router and the external merchant routers. The technology of network virtualization is introduced to map network interface from ForCES FE (Forwarding Element) to CE (Control Element) which collaborating with the redirect schema

Hemicellulose hydrolysis catalysed by solid acids

Depolymerising hemicellulose into platform sugar molecules is a key step in developing the concept of an integrated biorefinery. This reaction is traditionally catalysed by either enzymes or homogeneous mineral acids. We compared various solid catalysts for hemicellulose hydrolysis, running reactions in water, under neutral pH and relatively mild temperature and pressure (120 °C and 10 bar) conditions. Sulphonated resins are highly active, but they leach out sulphonic groups. Sulphonated silicas are less active, but more stable. They have weakly and strongly bound sites and the strongly bound ones do not leach. Zeolites are moderately active and stable. Among them, H-ferrierite especially, despite its small pores, exhibited high activity as well as good recyclability

Increased Ion Conductivity in Composite Solid Electrolytes With Porous Co3O4 Cuboids

Compared with the fagile ceramic solid electrolyte, Li-ion conducting polymer electrolytes are flexible and have better contact with electrodes. However, the ionic conductivity of the polymer electrolytes is usually limited because of the slow segment motion of the polymer. In this work, we introduce porous Co3O4 cuboids to Poly (Ethylene Oxide)-based electrolyte (PEO) to investigate the influence of these cuboids on the ionic conductivity of the composite electrolyte and the performance of the all-solid-state batteries. The experiment results showed the porous cuboid Co3O4 fillers not only break the order motion of segments of the polymer to increase the amorphous phase amount, but also build Li+ continuous migration pathway along the Co3O4 surface by the Lewis acid-base interaction. The Li+ conductivity of the composite polymer electrolyte reaches 1.6 × 10−4 S cm−1 at 30°C. The good compatibility of the composite polymer electrolyte to Li metal anode and LiFePO4 cathode ensures good rate performance and long cycle life when applying in an all-solid-state LiFePO4 battery. This strategy points out the direction for developing the high-conducting composite polymer electrolytes for all-solid-state batteries

Trait evaluation and trial cultivation of Dongfang No. 2, the hybrid of a male gametophyte clone of Laminaria longissima (Laminariales, Phaeophyta) and a female one of L. japonica

Direct cultivation of the first filial generation of gametophyte clones from different Laminaria species is a highly effective way of utilizing kelp heterozygous vigor (heterosis). A male gametophyte clone of L. longissima Miyabe and a female one of L. japonica Areschoug were hybridized, generating Dongfang No. 2 hybrid kelp. This hybrid kelp was used directly in trial cultivation, and its agronomical traits were evaluated. L. longissima and L. japonica are obviously different and complement each other in their morphological characteristics and ecological performances. The hybrid of their gametophyte clones, Dongfang No. 2, showed 56.8% heterozygous vigor in yield. It also showed increased yields of 41.0 and 76.4% compared to the widely used commercial kelps Variety 1 and Variety 2, respectively. In large-scale cultivation trials at different locations and in different years, Dongfang No. 2 attained significantly higher yields than Varieties 1 and 2, increasing yield by 26.4% on average over Variety 1 and by 65.0% over the other. Dongfang No. 2 has a robust holdfast and a wide, long and deep-brown uniform blade, which shows a distinct middle groove. In addition to yield, Dongfang No. 2 also demonstrates obvious heterozygous vigor in other agronomic traits. It is resistant to strong irradiance, as the two commercial varieties are, has an appropriate vegetative maturation time, and adapts well to a range of different culture conditions. The parentage analysis using AFLP of total DNA and SNP of the ITS region of ribosomal RNA transcription unit showed that Dongfang No. 2 is the real hybrid of L. japonica and L. longissima

One-pot synthesis of hierarchical porous layered hybrid materials based on aluminosilicate sheets and organic functional pillars

Layered hybrid materials (LHMs) based on ordered silicoaluminate sheets linked with organic fragments, perpendicularly located and stabilized in the interlayer space, were synthesized by a one-pot direct hydrothermal process in the absence of structural directing agents (SDAs) and using bridged silsesquioxanes as organosilicon precursors. By following the synthesis described here, the preliminary preparation of inorganic layered precursors, post-synthesis swelling and/or pillaring treatments can be avoided. The physico-chemical and structural characteristics of the materials were studied by chemical and thermogravimetrical analyses, X-ray diffraction, TEM microscopy, spectroscopic techniques (NMR and FTIR) and textural measurements. The complete exchange of intracrystalline sodium cations by protons, without substantial structural alteration of the hybrid materials, facilitated the generation of hybrid materials, which contained acid and base sites located in the inorganic (silicoaluminate layers) and in the organic interlayer linkers, respectively, with the resultant acid base materials showing promise as active and selective catalysts.The authors thank financial support to Spanish Government by Consolider-Ingenio MULTICAT CSD2009-00050, MAT2011-29020-C02-01 and Severo Ochoa Excellence Program SEV-2012-0267. AG and JMM thank pre-doctoral fellowships from MINECO for economical support.Gaona Cordero, A.; Moreno, JM.; Velty, A.; Díaz Morales, UM.; Corma Canós, A. (2014). One-pot synthesis of hierarchical porous layered hybrid materials based on aluminosilicate sheets and organic functional pillars. Journal of Materials Chemistry A. 2(45):19360-19375. https://doi.org/10.1039/c4ta04742gS1936019375245Fontecave, T., Sanchez, C., Azaïs, T., & Boissière, C. (2012). Chemical Modification As a Versatile Tool for Tuning Stability of Silica Based Mesoporous Carriers in Biologically Relevant Conditions. Chemistry of Materials, 24(22), 4326-4336. doi:10.1021/cm302142kDrisko, G. L., & Sanchez, C. (2012). Hybridization in Materials Science - Evolution, Current State, and Future Aspirations. European Journal of Inorganic Chemistry, 2012(32), 5097-5105. doi:10.1002/ejic.201201216Nicole, L., Laberty-Robert, C., Rozes, L., & Sanchez, C. (2014). Hybrid materials science: a promised land for the integrative design of multifunctional materials. Nanoscale, 6(12), 6267-6292. doi:10.1039/c4nr01788aWight, A. P., & Davis, M. E. (2002). Design and Preparation of Organic−Inorganic Hybrid Catalysts. Chemical Reviews, 102(10), 3589-3614. doi:10.1021/cr010334mFérey, G. (2008). Hybrid porous solids: past, present, future. Chem. Soc. Rev., 37(1), 191-214. doi:10.1039/b618320bHoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006). Silica-Based Mesoporous Organic–Inorganic Hybrid Materials. Angewandte Chemie International Edition, 45(20), 3216-3251. doi:10.1002/anie.200503075Sanchez, C., Boissiere, C., Cassaignon, S., Chaneac, C., Durupthy, O., Faustini, M., … Sassoye, C. (2013). Molecular Engineering of Functional Inorganic and Hybrid Materials. Chemistry of Materials, 26(1), 221-238. doi:10.1021/cm402528bSanchez, C., Julián, B., Belleville, P., & Popall, M. (2005). Applications of hybrid organic–inorganic nanocomposites. Journal of Materials Chemistry, 15(35-36), 3559. doi:10.1039/b509097kInagaki, S., Guan, S., Ohsuna, T., & Terasaki, O. (2002). An ordered mesoporous organosilica hybrid material with a crystal-like wall structure. Nature, 416(6878), 304-307. doi:10.1038/416304aCorma, A., García, H., & Llabrés i Xamena, F. X. (2010). Engineering Metal Organic Frameworks for Heterogeneous Catalysis. Chemical Reviews, 110(8), 4606-4655. doi:10.1021/cr9003924Reale, E., Leyva, A., Corma, A., Martínez, C., García, H., & Rey, F. (2005). A fluoride-catalyzed sol–gel route to catalytically active non-ordered mesoporous silica materials in the absence of surfactants. Journal of Materials Chemistry, 15(17), 1742. doi:10.1039/b415066jLi, H., Eddaoudi, M., O’Keeffe, M., & Yaghi, O. M. (1999). Design and synthesis of an exceptionally stable and highly porous metal-organic framework. Nature, 402(6759), 276-279. doi:10.1038/46248Ruiz-Hitzky, E., Darder, M., & Aranda, P. (2005). Functional biopolymer nanocomposites based on layered solids. Journal of Materials Chemistry, 15(35-36), 3650. doi:10.1039/b505640nLeonowicz, M. E., Lawton, J. A., Lawton, S. L., & Rubin, M. K. (1994). MCM-22: A Molecular Sieve with Two Independent Multidimensional Channel Systems. Science, 264(5167), 1910-1913. doi:10.1126/science.264.5167.1910Lagaly, G. (1986). Interaction of alkylamines with different types of layered compounds. Solid State Ionics, 22(1), 43-51. doi:10.1016/0167-2738(86)90057-3Corma, A., Corell, C., Pérez-Pariente, J., Guil, J. M., Guil-López, R., Nicolopoulos, S., … Vallet-Regi, M. (1996). Adsorption and catalytic properties of MCM-22: The influence of zeolite structure. Zeolites, 16(1), 7-14. doi:10.1016/0144-2449(95)00084-4Occelli, M. L. (1983). Physicochemical Properties of Montmorillonite Interlayered with Cationic Oxyaluminum Pillars. Clays and Clay Minerals, 31(1), 22-28. doi:10.1346/ccmn.1983.0310104Srivastava, V., Gaubert, K., Pucheault, M., & Vaultier, M. (2009). Organic-Inorganic Hybrid Materials for Enantioselective Organocatalysis. ChemCatChem, 1(1), 94-98. doi:10.1002/cctc.200900035Motokura, K., Tada, M., & Iwasawa, Y. (2009). Layered Materials with Coexisting Acidic and Basic Sites for Catalytic One-Pot Reaction Sequences. Journal of the American Chemical Society, 131(23), 7944-7945. doi:10.1021/ja9012003Baleizão, C., Gigante, B., Sabater, M. J., Garcia, H., & Corma, A. (2002). On the activity of chiral chromium salen complexes covalently bound to solid silicates for the enantioselective epoxide ring opening. Applied Catalysis A: General, 228(1-2), 279-288. doi:10.1016/s0926-860x(01)00979-6Ayala, V., Corma, A., Iglesias, M., Rincón, J. A., & Sánchez, F. (2004). Hybrid organic—inorganic catalysts: a cooperative effect between support, and palladium and nickel salen complexes on catalytic hydrogenation of imines. Journal of Catalysis, 224(1), 170-177. doi:10.1016/j.jcat.2004.02.017Corma, A., Fornes, V., & Rey, F. (2002). Delaminated Zeolites: An Efficient Support for Enzymes. Advanced Materials, 14(1), 71-74. doi:10.1002/1521-4095(20020104)14:13.0.co;2-wIshii, R., Ikeda, T., Itoh, T., Ebina, T., Yokoyama, T., Hanaoka, T., & Mizukami, F. (2006). Synthesis of new microporous layered organic–inorganic hybrid nanocomposites by alkoxysilylation of a crystalline layered silicate, ilerite. J. Mater. Chem., 16(41), 4035-4043. doi:10.1039/b610088kMochizuki, D., Kowata, S., & Kuroda, K. (2006). Synthesis of Microporous Inorganic−Organic Hybrids from Layered Octosilicate by Silylation with 1,4-Bis(trichloro- and dichloromethyl-silyl)benzenes. Chemistry of Materials, 18(22), 5223-5229. doi:10.1021/cm061357qCorma, A., Díaz, U., García, T., Sastre, G., & Velty, A. (2010). Multifunctional Hybrid Organic−Inorganic Catalytic Materials with a Hierarchical System of Well-Defined Micro- and Mesopores. Journal of the American Chemical Society, 132(42), 15011-15021. doi:10.1021/ja106272zShiju, N. R., Alberts, A. H., Khalid, S., Brown, D. R., & Rothenberg, G. (2011). Mesoporous Silica with Site-Isolated Amine and Phosphotungstic Acid Groups: A Solid Catalyst with Tunable Antagonistic Functions for One-Pot Tandem Reactions. Angewandte Chemie International Edition, 50(41), 9615-9619. doi:10.1002/anie.201101449Shylesh, S., Wagener, A., Seifert, A., Ernst, S., & Thiel, W. R. (2009). Mesoporous Organosilicas with Acidic Frameworks and Basic Sites in the Pores: An Approach to Cooperative Catalytic Reactions. Angewandte Chemie International Edition, 49(1), 184-187. doi:10.1002/anie.200903985Opanasenko, M., Parker, W. O., Shamzhy, M., Montanari, E., Bellettato, M., Mazur, M., … Čejka, J. (2014). Hierarchical Hybrid Organic–Inorganic Materials with Tunable Textural Properties Obtained Using Zeolitic-Layered Precursor. Journal of the American Chemical Society, 136(6), 2511-2519. doi:10.1021/ja410844fCorma, A., Fornes, V., Pergher, S. B., Maesen, T. L. M., & Buglass, J. G. (1998). Delaminated zeolite precursors as selective acidic catalysts. Nature, 396(6709), 353-356. doi:10.1038/24592Corma, A., Diaz, U., Domine, M. E., & Fornés, V. (2000). New Aluminosilicate and Titanosilicate Delaminated Materials Active for Acid Catalysis, and Oxidation Reactions Using H2O2. Journal of the American Chemical Society, 122(12), 2804-2809. doi:10.1021/ja9938130González-Arellano, C., Corma, A., Iglesias, M., & Sánchez, F. (2004). Pd(II)-Schiff Base Complexes Heterogenised on MCM-41 and Delaminated Zeolites as Efficient and Recyclable Catalysts for the Heck Reaction. Advanced Synthesis & Catalysis, 346(13-15), 1758-1764. doi:10.1002/adsc.200404119Corma, A., Gutiérrez-Puebla, E., Iglesias, M., Monge, A., Pérez-Ferreras, S., & Sánchez, F. (2006). New Heterogenized Gold(I)-Heterocyclic Carbene Complexes as Reusable Catalysts in Hydrogenation and Cross-Coupling Reactions. Advanced Synthesis & Catalysis, 348(14), 1899-1907. doi:10.1002/adsc.200606163Barth, J.-O., Kornatowski, J., & Lercher*, J. A. (2002). Synthesis of new MCM-36 derivatives pillared with alumina or magnesia–alumina. Journal of Materials Chemistry, 12(2), 369-373. doi:10.1039/b104824bAlauzun, J., Mehdi, A., Mouawia, R., Reyé, C., & Corriu, R. J. P. (2008). Synthesis of new lamellar materials by self-assembly and coordination chemistry in the solids. Journal of Sol-Gel Science and Technology, 46(3), 383-392. doi:10.1007/s10971-008-1710-7Moreau, J. J. E., Vellutini, L., Wong Chi Man, M., & Bied, C. (2001). New Hybrid Organic−Inorganic Solids with Helical Morphology via H-Bond Mediated Sol−Gel Hydrolysis of Silyl Derivatives of Chiral (R,R)- or (S,S)-Diureidocyclohexane. Journal of the American Chemical Society, 123(7), 1509-1510. doi:10.1021/ja003843zMoreau, J. J. E., Pichon, B. P., Wong Chi Man, M., Bied, C., Pritzkow, H., Bantignies, J.-L., … Sauvajol, J.-L. (2004). A Better Understanding of the Self-Structuration of Bridged Silsesquioxanes. Angewandte Chemie International Edition, 43(2), 203-206. doi:10.1002/anie.200352485Bellussi, G., Millini, R., Montanari, E., Carati, A., Rizzo, C., Parker, W. O., … Zanardi, S. (2012). A highly crystalline microporous hybrid organic–inorganic aluminosilicate resembling the AFI-type zeolite. Chemical Communications, 48(59), 7356. doi:10.1039/c2cc33417hBellussi, G., Carati, A., Di Paola, E., Millini, R., Parker, W. O., Rizzo, C., & Zanardi, S. (2008). Crystalline hybrid organic–inorganic alumino-silicates. Microporous and Mesoporous Materials, 113(1-3), 252-260. doi:10.1016/j.micromeso.2007.11.024Zanardi, S., Bellussi, G., Carati, A., Di Paola, E., Millini, R., Parker, W. O., & Rizzo, C. (2008). On the crystal structure solution and characterization of ECS-2, a novel microporous hybrid organic-inorganic material. Studies in Surface Science and Catalysis, 965-968. doi:10.1016/s0167-2991(08)80050-xBellussi, G., Montanari, E., Di Paola, E., Millini, R., Carati, A., Rizzo, C., … Zanardi, S. (2011). ECS-3: A Crystalline Hybrid Organic-Inorganic Aluminosilicate with Open Porosity. Angewandte Chemie International Edition, 51(3), 666-669. doi:10.1002/anie.201105496Zanardi, S., Parker, W. O., Carati, A., Botti, G., & Montanari, E. (2013). On the thermal behaviour of the crystalline hybrid organic–inorganic aluminosilicate ECS-3. Microporous and Mesoporous Materials, 172, 200-205. doi:10.1016/j.micromeso.2013.01.029Bellettato, M., Bonoldi, L., Cruciani, G., Flego, C., Guidetti, S., Millini, R., … Zanardi, S. (2014). Flexible Structure of a Thermally Stable Hybrid Aluminosilicate Built with Only the Three-Ring Unit. The Journal of Physical Chemistry C, 118(14), 7458-7467. doi:10.1021/jp5005133S. J. Gregg and K. S. W.Sing, Adsorption, Surface Area and Porosity, Academic Press, London, 1982, pp. 111–190Sing, K. S. W. (1985). Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984). Pure and Applied Chemistry, 57(4), 603-619. doi:10.1351/pac198557040603Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951). The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms. Journal of the American Chemical Society, 73(1), 373-380. doi:10.1021/ja01145a126Dailey, J. S., & Pinnavaia, T. J. (1992). Silica-pillared derivatives of H+-magadiite, a crystalline hydrated silica. Chemistry of Materials, 4(4), 855-863. doi:10.1021/cm00022a022Roth, W. J., & Dorset, D. L. (2011). Expanded view of zeolite structures and their variability based on layered nature of 3-D frameworks. Microporous and Mesoporous Materials, 142(1), 32-36. doi:10.1016/j.micromeso.2010.11.007Brenn, U., Ernst, H., Freude, D., Herrmann, R., Jähnig, R., Karge, H. ., … Schwieger, W. (2000). Synthesis and characterization of the layered sodium silicate ilerite. Microporous and Mesoporous Materials, 40(1-3), 43-52. doi:10.1016/s1387-1811(00)00241-9Fletcher, R. A. (1987). Synthesis of Kenyaite and Magadiite in the Presence of Various Anions. Clays and Clay Minerals, 35(4), 318-320. doi:10.1346/ccmn.1987.0350410Mochizuki, D., Shimojima, A., Imagawa, T., & Kuroda, K. (2005). Molecular Manipulation of Two- and Three-Dimensional Silica Nanostructures by Alkoxysilylation of a Layered Silicate Octosilicate and Subsequent Hydrolysis of Alkoxy Groups. Journal of the American Chemical Society, 127(19), 7183-7191. doi:10.1021/ja042194eBlake, A. J., Franklin, K. R., & Lowe, B. M. (1988). Preparation and properties of piperazine silicate (EU-19) and a silica polymorph (EU-20). Journal of the Chemical Society, Dalton Transactions, (10), 2513. doi:10.1039/dt9880002513Schreyeck, L., Caullet, P., Mougenel, J.-C., Guth, J.-L., & Marler, B. (1995). A layered microporous aluminosilicate precursor of FER-type zeolite. Journal of the Chemical Society, Chemical Communications, (21), 2187. doi:10.1039/c39950002187Yoshina-Ishii, C., Asefa, T., Coombs, N., MacLachlan, M. J., & Ozin, G. A. (1999). Periodic mesoporous organosilicas, PMOs: fusion of organic and inorganic chemistry ‘inside’ the channel walls of hexagonal mesoporous silica. Chemical Communications, (24), 2539-2540. doi:10.1039/a908252bZhou, D., Luo, X.-B., Zhang, H.-L., Dong, C., Xia, Q.-H., Liu, Z.-M., & Deng, F. (2009). Synthesis and characterization of organic-functionalized molecular sieves Ph-SAPO-5 and Ph-SAPO-11. Microporous and Mesoporous Materials, 121(1-3), 194-199. doi:10.1016/j.micromeso.2009.01.033Poli, E., Merino, E., Díaz, U., Brunel, D., & Corma, A. (2011). Si–C attachment points during sol–gel synthesis of organosilicas from 2,8-bis-silylated Tröger’s base as building block precursor. Journal of Materials Chemistry, 21(24), 8524. doi:10.1039/c1jm10426hVan Bokhoven, J. A., Roest, A. L., Koningsberger, D. C., Miller, J. T., Nachtegaal, G. H., & Kentgens, A. P. M. (2000). Changes in Structural and Electronic Properties of the Zeolite Framework Induced by Extraframework Al and La in H-USY and La(x)NaY:  A29Si and27Al MAS NMR and27Al MQ MAS NMR Study. The Journal of Physical Chemistry B, 104(29), 6743-6754. doi:10.1021/jp000147cL. J. Bellamy , Advances in infrared group frequencies, Chapman and Hall, London, 1968Rodriguez, I., Iborra, S., Rey, F., & Corma, A. (2000). Heterogeneized Brönsted base catalysts for fine chemicals production: grafted quaternary organic ammonium hydroxides as catalyst for the production of chromenes and coumarins. Applied Catalysis A: General, 194-195, 241-252. doi:10.1016/s0926-860x(99)00371-3CLIMENT, M. (2004). Increasing the basicity and catalytic activity of hydrotalcites by different synthesis procedures. Journal of Catalysis, 225(2), 316-326. doi:10.1016/j.jcat.2004.04.027Prout, F. S., Beaucaire, V. D., Dyrkacz, G. R., Koppes, W. M., Kuznicki, R. E., Marlewski, T. A., … Puda, J. M. (1973). Konevenagel Reaction. Kinetic study of the reaction of (+)-3-methyl-cyclohexanone with malononitrile. The Journal of Organic Chemistry, 38(8), 1512-1517. doi:10.1021/jo00948a015Guyot, J., & Kergomard, A. (1983). Cinétique et mécanisme de la réaction de knoevenagel dans le benzène-2. Tetrahedron, 39(7), 1167-1179. doi:10.1016/s0040-4020(01)91880-0Xu, L., Li, C., Zhang, K., & Wu, P. (2014). Bifunctional Tandem Catalysis on Multilamellar Organic–Inorganic Hybrid Zeolites. ACS Catalysis, 4(9), 2959-2968. doi:10.1021/cs500653pPINE, L. (1984). Prediction of cracking catalyst behavior by a zeolite unit cell size model. Journal of Catalysis, 85(2), 466-476. doi:10.1016/0021-9517(84)90235-