The multi-level perspective analysis: Indonesia geothermal energy transition study

The study adopts a multi-level perspective in technology transition to analyse how the transition process in the development of geothermal energy in Indonesia is able to compete against the incumbent fossil-fuelled energy sources. Three levels of multi-level perspective are socio-technical landscape (ST-landscape), socio-technical regime (ST-regime) and niche innovations in Indonesia geothermal development. The identification, mapping and analysis of the dynamic relationship between each level are the important pillars of the multi-level perspective framework. The analysis considers the set of rules, actors and controversies that may arise in the technological transition process. The identified geothermal resource risks are the basis of the emerging geothermal technological innovations in Indonesian geothermal. The analysis of this study reveals the transition pathway, which yields a forecast for the Indonesian geothermal technology transition in the form of scenarios and probable impacts

Er-doped sapphire fibre temperature sensors using upconversion emission

We report the production of Er:Al2O3 and Er:Yb:Al2O3 fibres using the LHPG method for application as fibre temperature sensors. Intense upconversion emission in the blue, green and red was observed from these fibres when pumped with a laser diode at 965nm. The lifetime and the integrated intensity of the upconversion signal was characterised as function of laser power and temperature. Results indicate the ratiometric analysis of the integrated intensities provides a suitable transduction mechanism for temperatures up to 1000K

Optical Fiber Methane Sensor Using Refractometry

One potential application of fiber refractometers is gas detection. In this work, a multimode fiber (MMF) refractomer has been designed as a CH4 sensor by de-cladding 2 cm of the MMF and then functionalizing this region using a polymeric thin film of cryptophane-A supramolecules incorporated within a styrene acrylonitrile (SAN) host. CH4 concentration is subsequently measured by observing the variation of the transmitted optical power along the MMF compared to an unfunctionalized MMF used as reference. This variation is induced by the modification of the refractive index of the functionalized film due to CH4 concentration variation. The proposed sensor is potentially of lower cost than alternative sensors and can detect CH4 concentration with a resolution of 186 ppm at a relatively fast response of ~25 s

Polyurethane Elastomers as Maxillofacial Prosthetic Materials

A series of polyurethane elastomers based on an aliphatic diisocyanate and a polyether macroglycol was polymerized with various crosslink densities and OH/NCO ratios. Stoichiometries yielding between 8,600 and 12,900 gm/ mole/crosslink and an OH/NCO ratio of 1.1 resulted in polymers with the low modulus, yet high strength and elongation necessary for maxillofacial applications.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68299/2/10.1177_00220345780570040501.pd

Unscreened Hartree-Fock calculations for metallic Fe, Co, Ni, and Cu from ab-initio Hamiltonians

Unscreened Hartree-Fock approximation (HFA) calculations for metallic Fe, Co, Ni, and Cu are presented, by using a quantum-chemical approach. We believe that these are the first HFA results to have been done for crystalline 3d transition metals. Our approach uses a linearized muffin-tin orbital calculation to determine Bloch functions for the Hartree one-particle Hamiltonian, and from these obtains maximally localized Wannier functions, using a method proposed by Marzari and Vanderbilt. Within this Wannier basis all relevant one-particle and two-particle Coulomb matrix elements are calculated. The resulting second-quantized multi-band Hamiltonian with ab-initio parameters is studied within the simplest many-body approximation, namely the unscreened, self-consistent HFA, which takes into account exact exchange and is free of self-interactions. Although the d-bands sit considerably lower within HFA than within the local (spin) density approximation L(S)DA, the exchange splitting and magnetic moments for ferromagnetic Fe, Co, and Ni are only slightly larger in HFA than what is obtained either experimentally or within LSDA. The HFA total energies are lower than the corresponding LSDA calculations. We believe that this same approach can be easily extended to include more sophisticated ab-initio many-body treatments of the electronic structure of solids.Comment: 11 papes, 7 figures, 5 table

Thaumasite form of sulfate attack in limestone cement mortars: A study on long term efficiency of mineral admixtures

Concrete and mortar made from limestone cement may exhibit a lack of durability due to the formation of thaumasite. The addition of minerals that improve the concrete durability is expected to slow down the formation of thaumasite. in this work the effect of natural pozzolana, fly ash, ground granulated blast-furnace slag and metakaolin on the thaumasite formation in limestone cement mortar is examined. A limestone cement, containing 15% w/w limestone, was used. Mortar specimens were prepared by replacing a part of limestone cement with the above minerals. The specimens were immersed in a 1.8% MgSO4 solution and cured at 5 and 25 degrees C. The status of the samples after a storage period of 5 years was reported based on visual inspection, compressive strength, mass measurements, ultrasonic pulse velocity measurements and analytical techniques. It is concluded that the use of specific minerals, as partial replacement of cement, inhibits thaumasite formation in limestone cement mortar. (C) 2008 Elsevier Ltd. All rights reserved

Polarisation of equine pregnancy outcome associated with a maternal MHC class I allele: preliminary evidence

Identification of risk factors which are associated with severe clinical signs can assist in the management of disease outbreaks and indicate future research areas. Pregnancy loss during late gestation in the mare compromises welfare, reduces fecundity and has financial implications for horse owners. This retrospective study focussed on the identification of risk factors associated with pregnancy loss among 46 Thoroughbred mares on a single British stud farm, with some but not all losses involving equid herpesvirus-1 (EHV-1) infection. In a sub-group of 30 mares, association between pregnancy loss and the presence of five common Thoroughbred horse haplotypes of the equine Major Histocompatibility Complex (MHC) was assessed. This involved development of sequence specific, reverse transcriptase polymerase chain reactions and in several mares, measurement of cytotoxic T lymphocyte activity. Of the 46 mares, 10 suffered late gestation pregnancy loss or neonatal foal death, five of which were EHV-1 positive. Maternal factors including age, parity, number of EHV-1 specific vaccinations and the number of days between final vaccination and foaling or abortion were not significantly associated with pregnancy loss. In contrast, a statistically significant association between the presence of the MHC class I B2 allele and pregnancy loss was identified, regardless of the fetus / foal’s EHV-1 status (p=0.002). In conclusion, this study demonstrated a significantly positive association between pregnancy loss in Thoroughbred mares and a specific MHC class I allele in the mother. This association requires independent validation and further investigation of the mechanism by which the mare’s genetic background contributes to pregnancy outcome

Proton-proton scattering above 3 GeV/c

A large set of data on proton-proton differential cross sections, analyzing powers and the double polarization parameter A_NN is analyzed employing the Regge formalism. We find that the data available at proton beam momenta from 3 GeV/c to 50 GeV/c exhibit features that are very well in line with the general characteristics of Regge phenomenology and can be described with a model that includes the rho, omega, f_2, and a_2 trajectories and single Pomeron exchange. Additional data, specifically for spin-dependent observables at forward angles, would be very helpful for testing and refining our Regge model.Comment: 16 pages, 19 figures; revised version accepted for publication in EPJ

Tomato: a crop species amenable to improvement by cellular and molecular methods

Tomato is a crop plant with a relatively small DNA content per haploid genome and a well developed genetics. Plant regeneration from explants and protoplasts is feasable which led to the development of efficient transformation procedures. In view of the current data, the isolation of useful mutants at the cellular level probably will be of limited value in the genetic improvement of tomato. Protoplast fusion may lead to novel combinations of organelle and nuclear DNA (cybrids), whereas this technique also provides a means of introducing genetic information from alien species into tomato. Important developments have come from molecular approaches. Following the construction of an RFLP map, these RFLP markers can be used in tomato to tag quantitative traits bred in from related species. Both RFLP's and transposons are in the process of being used to clone desired genes for which no gene products are known. Cloned genes can be introduced and potentially improve specific properties of tomato especially those controlled by single genes. Recent results suggest that, in principle, phenotypic mutants can be created for cloned and characterized genes and will prove their value in further improving the cultivated tomato.

Choice of tracers for the evaluation of spray deposits

Tracer substances, used to evaluate spraying effectiveness, ordinarily modify the surface tension of aqueous solutions. This study aimed to establish a method of using tracers to evaluate distribution and amount of spray deposits, adjusted to the surface tension of the spraying solution. The following products were tested: 0.15% Brilliant Blue, 0.15% Saturn Yellow in 0.015% Vixilperse lignosulfonate, and 0.005% sodium fluorescein, and mixtures of Brilliant Blue plus Saturn Yellow and Brilliant Blue plus sodium fluorescein at the same concentrations. Solutions were deposited on citrus leaves and stability was determined by measuring fluorescence and optical density of solutions without drying, dried in the dark and exposed to sunlight for 2, 4 and 8 h. These values were compared to those obtained directly in water. The static surface tension of the tracer solution was determined by weighing droplets formed during a period of 20 to 40 seconds. The Brilliant Blue and Saturn Yellow mixture at 0.15% was stable under all conditions tested. It was not absorbed by the leaves and maintained the same surface tension as that of water, thus permitting concentration adjustment to the same levels used for agrochemical products, and allowing the development of a qualitative method based on visual evaluation of the distribution of the pigment under ultraviolet light and of a quantitative method based on the determination of the amount of the dye deposited in the same solution. Spray deposition could be evaluated at different surface tensions of the spraying solution, simulating the effect of agrochemical formulations