2,047 research outputs found
Influence of rootstocks and pruning times on yield and on nutrient content and extraction in 'Niagara Rosada' grapevine.
The objective of this work was to evaluate the influence of rootstocks and pruning times on yield and on nutrient content and extraction by pruned branches and harvested bunches of 'Niagara Rosada' grapevine in subtropical climate. The rootstocks 'IAC 766', 'IAC 572', 'IAC 313', 'IAC 571‑6', and '106‑8 Mgt' were evaluated. Treatments consisted of a combination between five rootstocks and three pruning times. At pruning, fresh and dry matter mass of branches were evaluated to estimate biomass accumulation. At harvest, yield was estimated by weighing of bunches per plant. Branches and bunches were sampled at pruning and at harvest, respectively, for nutrient content analysis. Nutrient content and dry matter mass of branches and bunches were used to estimate total nutrient extraction. 'Niagara Rosada' grapevine grafted onto the 'IAC 572' rootstock had the highest yield and dry matter mass of bunches, which were significantly different from the ones observed in 'Niagara Rosada'/'IAC 313'. 'Niagara Rosada' grafted onto the 'IAC 572' rootstock extracted the largest quantity of K, P, Mg, S, Cu, and Fe, differing from 'IAC 313' and 'IAC 766' in K and P extraction, and from '106‑8 Mgt' in Mg and S extraction. Winter pruning results in higher yield, dry matter accumulation by branches, and total nutrient content and extraction.Título em português: Influência de porta?enxertos e épocas de poda na produtividade e no teor e na extração de nutrientes na videira 'Niagara Rosada'
A Scintillator Beam Monitor for Real-Time FLASH Radiotherapy
FLASH Radiotherapy (RT) is a potentially new cancer radiotherapy technique
where an entire therapeutic dose is delivered in about 0.1 s and at ~1000 times
higher dose rate than in conventional RT. For clinical trials to be conducted
safely, precise and fast beam monitoring that can generate an out-of-tolerance
beam interrupt is required. A FLASH Beam Scintillator Monitor (FBSM) is being
developed based in part on two novel proprietary scintillator materials: an
organic polymeric material (PM) and inorganic hybrid (HM). The FBSM provides
large area coverage, low mass profile, linear response over a broad dynamic
range, radiation tolerance, and real-time analysis IEC-compliant fast
beam-interrupt signal. This paper includes the design concept and test results
from prototype devices in radiation beams that include heavy ions, low energy
protons at nA currents, FLASH level dose per pulse electron beams, and in a
hospital radiotherapy clinic with electron beams. Results include image
quality, response linearity, radiation hardness, spatial resolution, and
real-time data processing. PM and HM scintillator exhibited no measurable drop
in signal after a cumulative dose of 9 kGy and 20 kGy respectively. HM showed a
small -0.02%/kGy signal decrease after a 212 kGy cumulative dose resulting from
continuous exposure for 15 minutes at a high FLASH dose rate of 234 Gy/s. These
tests established the linear response of the FBSM with respect to beam
currents, dose per pulse, and material thickness. Comparison with commercial
Gafchromic film indicates that the FBSM produces a high resolution 2D beam
image and can reproduce a nearly identical beam profile, including primary beam
tails. At 20 kfps or 50 microsec/frame, the real-time FPGA based computation
and analysis of beam position, beam shape, and beam dose takes < 1 microsec.Comment: 15 pages, 9 figure
Long-lived neutral-kaon flux measurement for the KOTO experiment
The KOTO ( at Tokai) experiment aims to observe the CP-violating rare
decay by using a long-lived neutral-kaon
beam produced by the 30 GeV proton beam at the Japan Proton Accelerator
Research Complex. The flux is an essential parameter for the measurement
of the branching fraction. Three neutral decay modes, , , and were used to
measure the flux in the beam line in the 2013 KOTO engineering run. A
Monte Carlo simulation was used to estimate the detector acceptance for these
decays. Agreement was found between the simulation model and the experimental
data, and the remaining systematic uncertainty was estimated at the 1.4\%
level. The flux was measured as per protons on a
66-mm-long Au target.Comment: 27 pages, 16 figures. To be appeared in Progress of Theoretical and
Experimental Physic
Coastal observatories for monitoring of fish behaviour and their responses to environmental changes
The inclusion of behavioral components in the analysis of a community can be of paramount importance in marine ecology. Diel (i.e., 24-h based), seasonal activity rhythms, or longer durational in behavioral responses can result in shifts in populations, and therefore on measurable abundances. Here, we review the value of developing cabled video observatory technology for the remote, long-term, and high-frequency monitoring of fish and their environments in coastal temperate areas. We provide details on the methodological requirements and constraints for the appropriate measurement of fish behavior over various seasonal scales (24 h, seasonal, annual) with camera systems mounted at fixed observatory locations. We highlight the importance of using marine sensors to simultaneously collect relevant environmental data in parallel to image data acquisition. Here we present multiparametric video, oceanographic, and meteorological data collected from the Mediterranean observatory platform, OBSEA (www.obsea.es; 20 m water depth). These data are reviewed in relation to ongoing and future developments of cabled observatory science. Two key approaches for the future improvement of cabled observatory technology are: (1) the application of Artificial Intelligence to aid in the analysis of increasingly large, complex, and highly interrelated biological and environmental data sets, and (2) the development of geographical observational networks to enable the reliable spatial analysis of observed populations over extended distances
Search for the Higgs boson in events with missing transverse energy and b quark jets produced in proton-antiproton collisions at s**(1/2)=1.96 TeV
We search for the standard model Higgs boson produced in association with an
electroweak vector boson in events with no identified charged leptons, large
imbalance in transverse momentum, and two jets where at least one contains a
secondary vertex consistent with the decay of b hadrons. We use ~1 fb-1
integrated luminosity of proton-antiproton collisions at s**(1/2)=1.96 TeV
recorded by the CDF II experiment at the Tevatron. We find 268 (16) single
(double) b-tagged candidate events, where 248 +/- 43 (14.4 +/- 2.7) are
expected from standard model background processes. We place 95% confidence
level upper limits on the Higgs boson production cross section for several
Higgs boson masses ranging from 110 GeV/c2 to 140 GeV/c2. For a mass of 115
GeV/c2 the observed (expected) limit is 20.4 (14.2) times the standard model
prediction.Comment: 8 pages, 2 figures, submitted to Phys. Rev. Let
Measurement of the Helicity Fractions of W Bosons from Top Quark Decays Using Fully Reconstructed top-antitop Events with CDF II
We present a measurement of the fractions F_0 and F_+ of longitudinally
polarized and right-handed W bosons in top quark decays using data collected
with the CDF II detector. The data set used in the analysis corresponds to an
integrated luminosity of approximately 318 pb -1. We select ttbar candidate
events with one lepton, at least four jets, and missing transverse energy. Our
helicity measurement uses the decay angle theta*, which is defined as the angle
between the momentum of the charged lepton in the W boson rest frame and the W
momentum in the top quark rest frame. The cos(theta*) distribution in the data
is determined by full kinematic reconstruction of the ttbar candidates. We find
F_0 = 0.85 +0.15 -0.22 (stat) +- 0.06 (syst) and F_+ = 0.05 +0.11 -0.05 (stat)
+- 0.03 (syst), which is consistent with the standard model prediction. We set
an upper limit on the fraction of right-handed W bosons of F_+ < 0.26 at the
95% confidence level.Comment: 11 pages, 2 figures, submitted to Phys. Rev.
Top quark mass measurement using the template method at CDF
We present a measurement of the top quark mass in the lepton+jets and
dilepton channels of decays using the template method. The data
sample corresponds to an integrated luminosity of 5.6 fb of
collisions at Tevatron with TeV, collected with the CDF II
detector. The measurement is performed by constructing templates of three
kinematic variables in the lepton+jets and two kinematic variables in the
dilepton channel. The variables are two reconstructed top quark masses from
different jets-to-quarks combinations and the invariant mass of two jets from
the decay in the lepton+jets channel, and a reconstructed top quark mass
and , a variable related to the transverse mass in events with two
missing particles, in the dilepton channel. The simultaneous fit of the
templates from signal and background events in the lepton+jets and dilepton
channels to the data yields a measured top quark mass of Comment: submitted to Phys. Rev.
Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt(s) = 1.96 TeV
We present a measurement of the top quark pair production cross section in
ppbar collisions at sqrt(s)=1.96 TeV using 318 pb^{-1} of data collected with
the Collider Detector at Fermilab. We select ttbar decays into the final states
e nu + jets and mu nu + jets, in which at least one b quark from the t-quark
decays is identified using a secondary vertex-finding algorithm. Assuming a top
quark mass of 178 GeV/c^2, we measure a cross section of 8.7 +-0.9 (stat)
+1.1-0.9 (syst) pb. We also report the first observation of ttbar with
significance greater than 5 sigma in the subsample in which both b quarks are
identified, corresponding to a cross section of 10.1 +1.6-1.4(stat)+2.0-1.3
(syst) pb.Comment: Accepted for publication in Physics Review Letters, 7 page
Evidence for the exclusive decay Bc+- to J/psi pi+- and measurement of the mass of the Bc meson
We report first evidence for a fully reconstructed decay mode of the
B_c^{\pm} meson in the channel B_c^{\pm} \to J/psi \pi^{\pm}, with J/psi \to
mu^+mu^-. The analysis is based on an integrated luminosity of 360 pb$^{-1} in
p\bar{p} collisions at 1.96 TeV center of mass energy collected by the Collider
Detector at Fermilab. We observe 14.6 \pm 4.6 signal events with a background
of 7.1 \pm 0.9 events, and a fit to the J/psi pi^{\pm} mass spectrum yields a
B_c^{\pm} mass of 6285.7 \pm 5.3(stat) \pm 1.2(syst) MeV/c^2. The probability
of a peak of this magnitude occurring by random fluctuation in the search
region is estimated as 0.012%.Comment: 7 pages, 3 figures. Version 3, accepted by PR
- …