580 research outputs found
Constant amplitude and post-overload fatigue crack growth behavior in PM aluminum alloy AA 8009
A recently developed, rapidly solidified, powder metallurgy, dispersion strengthened aluminum alloy, AA 8009, was fatigue tested at room temperature in lab air. Constant amplitude/constant delta kappa and single spike overload conditions were examined. High fatigue crack growth rates and low crack closure levels compared to typical ingot metallurgy aluminum alloys were observed. It was proposed that minimal crack roughness, crack path deflection, and limited slip reversibility, resulting from ultra-fine microstructure, were responsible for the relatively poor da/dN-delta kappa performance of AA 8009 as compared to that of typical IM aluminum alloys
How and When Socially Entrepreneurial Nonprofit Organizations Benefit From Adopting Social Alliance Management Routines to Manage Social Alliances?
Social alliance is defined as the collaboration between for-profit and nonprofit organizations. Building on the insights derived from the resource-based theory, we develop a conceptual framework to explain how socially entrepreneurial nonprofit organizations (SENPOs) can improve their social alliance performance by adopting strategic alliance management routines. We test our framework using the data collected from 203 UK-based SENPOs in the context of cause-related marketing campaign-derived social alliances. Our results confirm a positive relationship between social alliance management routines and social alliance performance. We also find that relational mechanisms, such as mutual trust, relational embeddedness, and relational commitment, mediate the relationship between social alliance management routines and social alliance performance. Moreover, our findings suggest that different types of social alliance motivation can influence the impact of social alliance management routines on different types of the relational mechanisms. In general, we demonstrate that SENPOs can benefit from adopting social alliance management routines and, in addition, highlight how and when the social alliance management routines–social alliance performance relationship might be shaped. Our study offers important academic and managerial implications, and points out future research directions
Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments
Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made
available as an electronic reprint with the permission of ASM International. One print or electronic copy may
be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via
electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or
modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor
From social ties to embedded competencies: The case of business groups
Our current views of economic competition are still rooted in the imagery of the isolated firm that transacts with its buyers, suppliers, and competitors via largely anonymous factor and product markets. Yet this view is fundamentally at odds with the growing importance of business groups in the global economy. We thus need a reconceptualized version of our idea of economic competition, which is capable of explaining competitive advantage at the group-versus-group rather than firm-versus-firm level of analysis. In the present paper we build on insights derived from organizational sociology and organizational economics to develop a business group-level theory of competition and competitive advantage based on embedded competencies
Anisotropy in mechanical properties and fracture behavior of an oxide dispersion Fe20Cr5Al alloy
Anisotropy of fracture toughness and fracture behavior of Fe20Cr5Al oxide dispersion-strengthened alloy has been investigated by means of compression tests, hardness tests, and wedge splitting test. The results show a small effect of the compression direction on yield strength (YS) and strain hardening. The YS is minimum for longitudinal direction and maximum for the tangential direction. The transverse plastic strain ratio is similar for tangential and longitudinal directions but very different from that in normal direction. Hardness depends on the indentation plane; it is lower for any plane parallel to the L-T plane and of similar magnitude for the other orthogonal planes, i.e., the L-S and T-S planes. Macroscopically, two failure modes have been observed after wedge-splitting tests, those of LS and TS specimens in which fracture deviates along one or two branches normal to the notch plane, and those of LT, TL, SL, and ST specimens in which fracture propagates along the notch plane. Besides LT and TL specimens present delaminations parallel to L-T plane. Both, the fracture surface of branching cracks and that of the delaminations, show an intergranular brittle fracture appearance. It is proposed that the main cause of the delamination and crack branching is the alignment in the mesoscopic scale of the ultrafine grains structure which is enhanced by the 〈110〉- texture of the material and by the presence in the grain boundaries of both yttria dispersoids and impurity contaminations. An elastoplastic finite element analysis was performed to study what stress state is the cause of the branches and delaminations. It is concluded that the normal to the crack branches and/or the shear stress components could determine the crack bifurcation mechanism, whereas the delamination it seems that it is controlled by the magnitude of the stress component normal to the delamination plane. © The Minerals, Metals & Materials Society and ASM International 2014.Peer Reviewe
Measuring personal networks and their relationship with scientific production
The analysis of social networks has remained a crucial and yet understudied aspect of the efforts to measure Triple Helix linkages. The Triple Helix model aims to explain, among other aspects of knowledge-based societies, ¿the current research system in its social context. This paper develops a novel approach to study the research system from the perspective of the individual, through the analysis of the relationships among researchers, and between them and other social actors. We develop a new set of techniques and show how they can be applied to the study of a specific case (a group of academics within a university department). We analyse their informal social networks and show how a relationship exists between the characteristics of an individual¿s network of social links and his or her research output
Recommended from our members
International experience and FDI location choices of Chinese firms: The moderating effects of home country government support and host country institutions
We examine the extent to which Chinese government support of foreign direct investment (FDI) projects and host country institutional environments interact with prior entry experience by Chinese firms, and how this interrelationship affects FDI undertaken by Chinese firms. We hypothesize that home country government support and well-established host country institutions enhance organizational capabilities to take risks in FDI. As such, they reduce the need to accumulate experiential knowledge and capabilities relating to entering host countries based on prior entry experience in a particular country when undertaking follow-up investment projects. Using a unique, hand-collected panel data set of Chinese publicly listed firms during 2002–2009, we find that home government support and well-developed host country institutions reduce the importance of prior entry experience and significantly increase the likelihood of FDI entry into a host country. Further, from our subsample analyses we identify differences between entering developed and developing host countries in terms of the impact of home country government support and quality of host country institutions. Our findings help explain the puzzle concerning why emerging economy firms have rapidly internationalized in a short period of time and do not follow the pattern predicted by classical IB theories
Recommended from our members
Knowledge Transfer and Accomodation Effects in Multinational Corporations: Evidence from European Subsidiaries
Foreign subsidiaries in multinational corporations (MNCs) possess knowledge that has different sources (e.g., the firm itself or various sources in the environment). How such sources influence knowledge transfer is not well understood. Drawing on the “accommodation effect” from cognitive psychology, the authors argue that accumulation of externally sourced knowledge in a subsidiary may reduce the value of transferring that subsidiary’s knowledge to other parts of the MNC. The authors develop a parsimonious model of intrafirm knowledge transfer and test its predictions against a unique data set on subsidiary knowledge development that includes the sources of subsidiary knowledge and the extent of knowledge transfer to other MNC units. The authors show that a high level of externally sourced knowledge in a subsidiary is associated with a high level of knowledge transfer from that subsidiary only if a certain tipping point of internally sourced knowledge has been surpassed. This suggests that subsidiary knowledge stocks that are balanced in terms of their origins tend to be more valuable, congruous, and fungible, and therefore more likely to be transferred to other MNC units
Trust in financial services: the influence of demographics and dispositional characteristics
So far, very little attention has been paid to examining consumer perceptions of trust from an interdisciplinary perspective. The purpose of this study is to examine how consumer trusting belief and disposition to trust within the financial services sector vary on the basis of individual demographic differences in trust. The research provides new insights into how consumers with higher dispositional trust have higher institutional trust and higher trusting belief and how consumers’ trusting belief significantly differs according to their demographic background in terms of age, marital status, ethnicity and gross annual income. The findings offer useful insights for the managers in financial institutions to carefully consider the impact of the influence of these individual differences on consumer behaviour in order to serve the needs of consumers in their target market and be able to design financial products and develop trust building strategies to attract and retain them. They also call for the action of the regulators and the financial institutions to play their part in building strong institutional systems that contribute to engendering higher levels of consumer trust
Recommended from our members
Open-system orchestration as a relational source of sensing capabilities: Evidence from a venture association
Research on innovation networks has highlighted the pivotal role that actors with more prominence and power, such as hub firms, may play in orchestrating the activities of other network members along a collective innovation effort. Our study examined the undertheorized, but no less important, type of orchestration that characterizes other organizations, such as business incubators and venture associations, who seek to support the dispersed entrepreneurial efforts of network members. We refer to this type as ‘open-system’ orchestration, as opposed to the commonly studied ‘closed-system’ type performed by hub firms. Our findings reveal how the processes of open-system orchestration differ markedly from those of closed-system orchestration, and detail how these processes influence the micro-foundations of network members’ sensing capabilities. By doing so, we also offer empirical substantiation and theoretical elaboration to the idea that dynamic capabilities might not reside exclusively inside firms, but could be co-created relationally with other parties in the business ecosystem
- …