Men as allies against sexism: The positive effects of a suggestion of sexism by male (vs. female) sources

Journal ArticleCopyright © 2014 the Author(s).Sexism is often expressed in subtle and ambiguous ways, causing targets to doubt their own capabilities or to show stereotypeconfirming behavior. This research examines whether the self-confidence and stereotype (dis-)confirming behavior of targets of sexism can be bolstered when other male versus female sources suggest that sexism may have played a role. Both Study 1 (N = 78) and Study 2 (N = 90) show that a suggestion of sexism has more beneficial effects when it is made by male sources than when it is made by female sources. When males suggested that sexism had taken place, targets reported more self-confidence (less self-handicapping and higher personal performance state self-esteem) and showed less stereotype confirmation (less self-stereotyping and better task performance) than when sexism was suggested by a female source. Study 2 additionally revealed that targets are more likely to file a complaint when men suggest that sexism took place than when this same suggestion was made by women. These results indicate that men can constitute important allies against sexism if they speak out when sexist treatment takes place

Responding to Gender-Based Rejection: Objecting Against Negative and Disproving Positive Intergroup Differentiation

Copyright © 2013 SAGE Publications. Author's draft version; post-print. Final version published by Sage available on Sage Journals Online http://online.sagepub.com/We examined whether women (N = 87) who are exposed to blatant discrimination show different responses depending on whether they are rejected with reference to positively (“this is something for men”) or negatively (“this is nothing for women”) phrased intergroup differentiation. Based on current insights on responses to discrimination, we predicted and found that those who are exposed to negative differentiation will tend to object to those who rejected them, while positive differentiation is more likely to induce efforts to disprove the validity of the rejection. Female participants facing negative differentiation objected against the discriminatory nature of their rejection and showed cardiovascular reactivity more indicative of threat (and less of challenge) than participants in the positive differentiation condition. In addition, positive differentiation caused participants to disprove the validity of these group-based expectations by claiming the possession of relatively more masculine (and less feminine) traits

The dark side of subtle discrimination : how targets respond to different forms of discrimination

This thesis investigates the role of several individual and social factors (i.e., personal self-esteem, social norms and social influence) that directly affect how people deal with uncertainty, in reaction to blatant versus subtle discrimination. While responses to blatant discrimination were not affected by any of these factors, these factors determined to a significant degree responses to subtle discrimination. The main idea throughout the thesis is that blatant discrimination involves a clear rejection situation. Because of this clarity, the factors that are addressed in this dissertation are not expected to determine responses to this type of unfair group-based treatment. However, when situational cues fail to indicate the cause of the negative outcome such as in case of subtle discrimination, targets are more dependent on their level of self-esteem, the tolerance of social norms, and the opinion of others regarding the discriminatory treatment. This thesis provides us with insightful information about responses to multi-interpretable rejection situations where people are unsure about whether the negative treatment is due to their individual qualities or due to the prejudice the other holds about their social group. Furthermore, the thesis clarifies why group-based rejection can sometimes have negative and at other times have positive consequences by comparing responses of the targets to blatant and subtle discrimination.LEI Universiteit LeidenNWO Vernieuwingsimpuls aan Manuela BarretoSocial decision makin

Max and the knight: how a therapeutic story provided a connection point for child, family, school, human service agencies and community

OBJECTIVES: We developed an outcome indicator based on the finding that complications often prolong the patient's hospital stay. A higher percentage of patients with an unexpectedly long length of stay (UL-LOS) compared to the national average may indicate shortcomings in patient safety. We explored the utility of the UL-LOS indicator. SETTING: We used data of 61 Dutch hospitals. In total these hospitals had 1 400 000 clinical discharges in 2011. PARTICIPANTS: The indicator is based on the percentage of patients with a prolonged length of stay of more than 50% of the expected length of stay and calculated among survivors. INTERVENTIONS: No interventions were made. OUTCOME MEASURES: The outcome measures were the variability of the indicator across hospitals, the stability over time, the correlation between the UL-LOS and standardised mortality and the influence on the indicator of hospitals that did have problems discharging their patients to other health services such as nursing homes. RESULTS: In order to compare hospitals properly the expected length of stay was computed based on comparison with benchmark populations. The standardisation was based on patients' age, primary diagnosis and main procedure. The UL-LOS indicator showed considerable variability between the Dutch hospitals: from 8.6% to 20.1% in 2011. The outcomes had relatively small CIs since they were based on large numbers of patients. The stability of the indicator over time was quite high. The indicator had a significant positive correlation with the standardised mortality (r=0.44 (p0.05)). CONCLUSIONS: The UL-LOS indicator is a useful addition to other patient safety indicators by revealing variation between hospitals and areas of possible patient safety improvement

Influence of additives on the electrodeposition of zinc from a deep eutectic solvent

The effects of nicotinic acid (NA), boric acid (BA) and benzoquinone (BQ) on the electrodeposition of Zn have been studied in a choline chloride (ChCl) ethylene glycol (EG) based deep eutectic solvent (DES), (1ChCl:2 EG), and for the first time a bright zinc coating has been achieved when NA was used. In metal electroplating processes, small-molecule additives are often included in the plating bath to improve properties of coating such as brightness, roughness, thickness, hardness and resistance to corrosion. The effects of additives on the electrodeposition of Zn from aqueous solution have been extensively investigated. However, very few studies have considered the effects of additives on the electrodeposition of Zn from ionic liquids or deep eutectic solvents. The electrochemical properties of the plating liquid have been studied here using cyclic voltammetry, chronocoulometry, chronoamperometry and microgravimetry (EQCM). Redox peak currents decrease when additives were included in the Zn solution and total charge was also reduced in experiments where additives were present. The Zn deposition in the absence of additive is in good agreement with an instantaneous growth mechanism at short experimental time scales (being indeterminate over longer periods), however, this changes to one of a progressive growth mechanism when additives were included in the coating bath. The current efficiency of zinc deposition in the DES without additives was 95%, which was reduced when additives were included. The resultant surface morphologies, thickness, topography, roughness and crystal structure of the Zn coating were revealed by scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD), demonstrating that those additives serve as effective brighteners that can produce highly uniform and smooth zinc deposits

Operational experience, improvements, and performance of the CDF Run II silicon vertex detector

The Collider Detector at Fermilab (CDF) pursues a broad physics program at Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and the end of operations in September 2011, the Tevatron delivered 12 fb-1 of integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics analyses undertaken by CDF require heavy flavor tagging with large charged particle tracking acceptance. To realize these goals, in 2001 CDF installed eight layers of silicon microstrip detectors around its interaction region. These detectors were designed for 2--5 years of operation, radiation doses up to 2 Mrad (0.02 Gy), and were expected to be replaced in 2004. The sensors were not replaced, and the Tevatron run was extended for several years beyond its design, exposing the sensors and electronics to much higher radiation doses than anticipated. In this paper we describe the operational challenges encountered over the past 10 years of running the CDF silicon detectors, the preventive measures undertaken, and the improvements made along the way to ensure their optimal performance for collecting high quality physics data. In addition, we describe the quantities and methods used to monitor radiation damage in the sensors for optimal performance and summarize the detector performance quantities important to CDF's physics program, including vertex resolution, heavy flavor tagging, and silicon vertex trigger performance.Comment: Preprint accepted for publication in Nuclear Instruments and Methods A (07/31/2013

Measurement of Leptonic Asymmetries and Top Quark Polarization in ttbar Production

We present measurements of lepton (l) angular distributions in ttbar -> W+ b W- b -> l+ nu b l- nubar bbar decays produced in ppbar collisions at a center-of-mass energy of sqrt(s)=1.96TeV, where l is an electron or muon. Using data corresponding to an integrated luminosity of 5.4fb^-1, collected with the D0 detector at the Fermilab Collider, we find that the angular distributions of l- relative to anti-protons and l+ relative to protons are in agreement with each other. Combining the two distributions and correcting for detector acceptance we obtain the forward-backward asymmetry A^l_FB = (5.8 +- 5.1(stat) +- 1.3(syst))%, compared to the standard model prediction of A^l_FB (predicted) = (4.7 +- 0.1)%. This result is further combined with the measurement based on the analysis of the l+jets final state to obtain A^l_FB = (11.8 +- 3.2)%. Furthermore, we present a first study of the top-quark polarization.Comment: submitted versio

Evidence for a narrow dip structure at 1.9 GeV/c2^2 in 3π+3π−3\pi^+ 3\pi^- diffractive photoproduction

A narrow dip structure has been observed at 1.9 GeV/c$^2$ in a study of diffractive photoproduction of the $~3\pi^+3\pi^-$ final state performed by the Fermilab experiment E687.Comment: The data of Figure 6 can be obtained by downloading the raw data file e687_6pi.txt. v5 (2nov2018): added Fig. 7, the 6 pion energy distribution as requested by a reade

Precise measurement of the top quark mass in the dilepton channel at D0

We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel.Comment: 7 pages, 4 figure