Revisiting geochemical controls on patterns of carbonate deposition through the lens of multiple pathways to mineralization

The carbonate sedimentary record contains diverse compositions and textures that reflect the evolution of oceans and atmospheres through geological time. Efforts to reconstruct paleoenvironmental conditions from these deposits continue to be hindered by the need for process-based models that can explain observed shifts in carbonate chemistry and form. Traditional interpretations assume minerals precipitate and grow by classical ion-by-ion addition processes but are unable to reconcile a number of unusual features contained in Proterozoic carbonates. The realization that diverse organisms produce high Mg carbonate skeletal structures by non-classical pathways involving amorphous intermediates raises the question of whether similar processes are also active in sedimentary environments. This study examines the hypothesis that non-classical pathways to mineralization are the physical basis for some of the carbonate morphologies and compositions observed in natural and laboratory settings. We designed experiments with a series of different solution Mg : Ca ratios and saturation environments to investigate the effects on carbonate phase, Mg content, and morphology. Our observations of diverse carbonate mineral compositions and textures suggest geochemical conditions bias the mineralization pathway by a systematic relationship to Mg : Ca ratio and the abundance of carbonate ions. Environments with low Mg levels produce calcite crystallites with 0–12 mol% MgCO_3. In contrast, the combination of high initial Mg : Ca and rapidly increasing saturation opens a non-classical pathway that begins with extensive precipitation of an amorphous calcium carbonate (ACC). This phase slowly transforms to aggregates of very high Mg calcite nanoparticles whose structures and compositions are similar to natural disordered dolomites. The non-classical pathways are favored when the local environment contains sufficient Mg to inhibit calcite growth through increased solubility—a thermodynamic factor, and achieves saturation with respect to ACC on a timescale that is shorter than the rate of aragonite nucleation—a kinetic factor. Aragonite is produced when Mg levels are high but saturation is insufficient for ACC precipitation. The findings provide a physical basis for anecdotal claims that the interplay of kinetic and thermodynamic factors underlies patterns of carbonate precipitation and suggest the need to expand traditional interpretations of geological carbonate formation to include non-classical pathways to mineralization

The Effect of the CO32- to Ca2+ Ion activity ratio on calcite precipitation kinetics and Sr2+ partitioning

<p>Abstract</p> <p>Background</p> <p>A proposed strategy for immobilizing trace metals in the subsurface is to stimulate calcium carbonate precipitation and incorporate contaminants by co-precipitation. Such an approach will require injecting chemical amendments into the subsurface to generate supersaturated conditions that promote mineral precipitation. However, the formation of reactant mixing zones will create gradients in both the saturation state and ion activity ratios (i.e., <inline-formula><m:math name="1467-4866-13-1-i1" xmlns:m="http://www.w3.org/1998/Math/MathML"><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:msub><m:mrow><m:mi>O</m:mi></m:mrow><m:mrow><m:mn>3</m:mn></m:mrow></m:msub></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">-</m:mo></m:mrow></m:msup></m:mrow></m:msub><m:mo class="MathClass-bin">/</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">+</m:mo></m:mrow></m:msup></m:mrow></m:msub></m:math></inline-formula>). To better understand the effect of ion activity ratios on CaCO₃precipitation kinetics and Sr²⁺co-precipitation, experiments were conducted under constant composition conditions where the supersaturation state (Ω) for calcite was held constant at 9.4, but the ion activity ratio <inline-formula><m:math name="1467-4866-13-1-i2" xmlns:m="http://www.w3.org/1998/Math/MathML"><m:mrow><m:mo class="MathClass-open">(</m:mo><m:mrow><m:mi>r</m:mi><m:mo class="MathClass-rel">=</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:msub><m:mrow><m:mi>O</m:mi></m:mrow><m:mrow><m:mn>3</m:mn></m:mrow></m:msub></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">-</m:mo></m:mrow></m:msup></m:mrow></m:msub><m:mo class="MathClass-bin">/</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">+</m:mo></m:mrow></m:msup></m:mrow></m:msub></m:mrow><m:mo class="MathClass-close">)</m:mo></m:mrow></m:math></inline-formula> was varied between 0.0032 and 4.15.</p> <p>Results</p> <p>Calcite was the only phase observed, by XRD, at the end of the experiments. Precipitation rates increased from 41.3 ± 3.4 μmol m^-2min^-1at <it>r = </it>0.0315 to a maximum rate of 74.5 ± 4.8 μmol m^-2min^-1at <it>r = </it>0.306 followed by a decrease to 46.3 ± 9.6 μmol m^-2min^-1at <it>r </it>= 1.822. The trend was simulated using a simple mass transfer model for solute uptake at the calcite surface. However, precipitation rates at fixed saturation states also evolved with time. Precipitation rates accelerated for low <it>r </it>values but slowed for high <it>r </it>values. These trends may be related to changes in effective reactive surface area. The <inline-formula><m:math xmlns:m="http://www.w3.org/1998/Math/MathML" name="1467-4866-13-1-i1"><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:msub><m:mrow><m:mi>O</m:mi></m:mrow><m:mrow><m:mn>3</m:mn></m:mrow></m:msub></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">-</m:mo></m:mrow></m:msup></m:mrow></m:msub><m:mo class="MathClass-bin">/</m:mo><m:msub><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mi>C</m:mi><m:msup><m:mrow><m:mi>a</m:mi></m:mrow><m:mrow><m:mn>2</m:mn><m:mo class="MathClass-bin">+</m:mo></m:mrow></m:msup></m:mrow></m:msub></m:math></inline-formula> ratios did not affect the distribution coefficient for Sr in calcite (D^P_Sr²⁺), apart from the indirect effect associated with the established positive correlation between D^P_Sr²⁺and calcite precipitation rate.</p> <p>Conclusion</p> <p>At a constant supersaturation state (Ω = 9.4), varying the ion activity ratio affects the calcite precipitation rate. This behavior is not predicted by affinity-based rate models. Furthermore, at the highest ion ratio tested, no precipitation was observed, while at the lowest ion ratio precipitation occurred immediately and valid rate measurements could not be made. The maximum measured precipitation rate was 2-fold greater than the minima, and occurred at a carbonate to calcium ion activity ratio of 0.306. These findings have implications for predicting the progress and cost of remediation operations involving enhanced calcite precipitation where mineral precipitation rates, and the spatial/temporal distribution of those rates, can have significant impacts on the mobility of contaminants.</p

Uptake of alkaline earth metals in Alcyonarian spicules (Octocorallia)

Alcyonarian corals (Octocorallia) living in shallow tropical seas produce spicules of high-Mg calcite with ∼13 mol% MgCO3. We cultured the tropical alcyonarian coral Rhythisma fulvum in experiments varying temperature (19–32 °C) and pH (8.15–8.44). Alkalinity depletion caused by spicule formation systematically varied in the temperature experiments increasing from 19 to 29 °C. Spicules were investigated for their elemental ratios (Mg/Ca, Sr/Ca) using ICP-OES, δ44/40Ca using TIMS, as well as δ18O and δ13C by IRMS. Mg/Ca increased with temperature from 146 to 164 mmol/mol, in good agreement with the range observed for marine inorganic calcite. Mg/Ca increased by 1.0 ± 0.4 mmol/mol/°C, similar to the sensitivity of Miliolid foraminifera. The pH experiments revealed a linear relationship between Mg/Ca and carbonate ion concentration of +0.03 ± 0.02 mmol/mol/μMol. Sr/Ca ranges from 2.5 to 2.9 mmol/mol being in good agreement with other high-Mg calcites. Temperature and pH experiments showed linear dependencies of Sr/Ca matching inorganic calcite trends and pointing to a decoupling of crystal precipitation rate and calcification rate. Ca isotopes range between 0.7‰ and 0.9‰ in good agreement with aragonitic scleractinian corals and calcitic coccoliths. Presumably Ca isotopes are fractionated by a biological mechanism that may be independent of the skeletal mineralogy. We observe no temperature trend, but a significant decrease of δ44/40Ca with increasing pH. This inverse correlation may characterise biologically controlled intracellular calcification. Oxygen isotope ratios are higher than expected for isotopic equilibrium with a temperature sensitivity of −0.15 ± 0.03‰/°C. Carbon isotope ratios are significantly lower than expected for equilibrium and positively correlated with temperature with a slope of 0.20 ± 0.04‰/°C. Many of our observations on trace element incorporation in R. fulvum may be explained by inorganic processes during crystal formation, which do not comply with the intracellular mode of calcification in Alcyonarian corals. The observed elemental and isotopic compositions, however, could be explained if the partitioning caused by biological mechanisms mimics the effects of inorganic processes

The Effects of Mary Rose Conservation Treatment on Iron Oxidation Processes and Microbial Communities Contributing to Acid Production in Marine Archaeological Timbers

The Tudor warship the Mary Rose has reached an important transition point in her conservation. The 19 year long process of spraying with polyethylene glycol (PEG) has been completed (April 29th 2013) and the hull is air drying under tightly controlled conditions. Acidophilic bacteria capable of oxidising iron and sulfur have been previously identified and enriched from unpreserved timbers of the Mary Rose, demonstrating that biological pathways of iron and sulfur oxidization existed potentially in this wood, before preservation with PEG. This study was designed to establish if the recycled PEG spray system was a reservoir of microorganisms capable of iron and sulfur oxidization during preservation of the Mary Rose. Microbial enrichments derived from PEG impregnated biofilm collected from underneath the Mary Rose hull, were examined to better understand the processes of cycling of iron. X-ray absorption spectroscopy was utilised to demonstrate the biological contribution to production of sulfuric acid in the wood. Using molecular microbiological techniques to examine these enrichment cultures, PEG was found to mediate a shift in the microbial community from a co-culture of Stenotrophomonas and Brevunidimonas sp, to a co-culture of Stenotrophomonas and the iron oxidising Alicyclobacillus sp. Evidence is presented that PEG is not an inert substance in relation to the redox cycling of iron. This is the first demonstration that solutions of PEG used in the conservation of the Mary Rose are promoting the oxidation of ferrous iron in acidic solutions, in which spontaneous abiotic oxidation does not occur in water. Critically, these results suggest PEG mediated redox cycling of iron between valence states in solutions of 75% PEG 200 and 50% PEG 2000 (v/v) at pH 3.0, with serious implications for the future use of PEG as a conservation material of iron rich wooden archaeological artefacts

The Intersection of Interfacial Forces and Electrochemical Reactions

We review recent developments in experimental techniques that simultaneously combine measurements of the interaction forces or energies between two extended surfaces immersed in electrolyte solutions—primarily aqueous—with simultaneous monitoring of their (electro)chemical reactions and controlling the electrochemical surface potential of at least one of the surfaces. Combination of these complementary techniques allows for simultaneous real time monitoring of angstrom level changes in surface thickness and roughness, surface–surface interaction energies, and charge and mass transferred via electrochemical reactions, dissolution, and adsorption, and/or charging of electric double layers. These techniques employ the surface forces apparatus (SFA) combined with various “electrochemical attachments” for in situ measurements of various physical and (electro)chemical properties (e.g., cyclic voltammetry), optical imaging, and electric potentials and currents generated naturally during an interaction, as well as when electric fields (potential differences) are applied between the surfaces and/or solution—in some cases allowing for the chemical reaction equation to be unambiguously determined. We discuss how the physical interactions between two different surfaces when brought close to each other (<10 nm) can affect their chemistry, and suggest further extensions of these techniques to biological systems and simultaneous in situ spectroscopic measurements for chemical analysis

Kinetics of Silica Scaling

In order to evaluate the rates of dissolution and precipitation of mineral components from rock-water reactions, an experimental model of natural geothermal systems has been designed and constructed. Each circulating system consists of an 1125 ml., 310 S.S. reaction vessel connected via 316 S.S. tubing to a series of heat exchangers, a double valve sampling system, a circulating pump and a reservoir-fed pressure pump. The low temperature heat exchanger, the sampling system and the circulating pump are contained within a constant temperature bath which is maintained at 65 C. The sampling system permits extraction of 5 ml. samples from the circulating solution with no significant perturbation of conditions within the pressurized system. Analysis of these samples provides the basis for deriving reaction rate constants. The run materials used to date have included pure quartz sand, biotite adamellite and granitic gneiss. The latter two samples were collected in the Nacemiento Mountains, New Mexico and are similar to the rock types found in the basement complex under the Los Alamos Scientific Laboratory's Dry Hot Rock Geothermal Project. Air-saturated distilled water and NaCl brines have both been used as experimental fluids