Cadomian and Variscan metamorphic events in the Léon Domain (Armorican Massif) resolved by trace element analysis in monazite and garnet

The question, whether crustal domains are allochthonous terranes or not is crucial for plate tectonic models of the Ibero-Armorican segment of the Variscan belt. The Léon Domain in the Armorican Massif appears as a displaced crustal block as it bears a resemblance to the South Armorican Domain of the internal Variscan belt (Le Corre et al. 1989). In the central part of the Léon, the amphibolite-facies Conquet- Penze Micaschist Unit (CPMU) overlies the high-grade Lesneven Gneiss Unit (LGU). At the base of the LGU, a high-pressure stage at 700°C/>13 kbar, recorded by garnet-clinopyroxene assemblages in eclogites was followed by a high-temperature event at 800°C/8 kbar with garnet and cordierite in aluminous paragneisses. Maximal temperatures in the upper parts of the LGU were 630°C/6 kbar. In the micaschists of the Conquet-Penze Unit, microstructures indicate a crystallization of garnet and then staurolite during the development of S1 and S2 foliations. Zoned garnet in assemblages with staurolite recorded prograde P–T paths from 490– 610°C at 5–8 kbar in the upper and at 6– 9 kbar in the lower parts of the CPMU. The foliation S2 was overprinted by shear bands with a top-to- SW directed normal sense of shear, corresponding to a dextral strike-slip movement (Balé & Brun 1986). A younger population of monazite with variable Y contents displays Variscan Th-U-Pb ages (EMP dating method) between 340 and 300Ma. In contrast, an older population of Cadomian monazite at 552–517Ma is uniformly rich in Y and was observed in samples with only few or even no garnet. As the 330–340Ma Saint Renan- Kersaint granite postdates the foliations S1 and S2 with peak metamorphic assemblages one can conclude that 340–300Ma Variscan monazites should postdate garnet crystallization.conferenc

In Situ Chalcophile and Siderophile Element Behavior in Sulfides from Moroccan Middle Atlas Spinel Peridotite Xenoliths during Metasomatism and Weathering

In situ chalcophile and siderophile major and trace elements were analyzed in sulfides from eight Moroccan Middle Atlas lherzolite xenoliths using electron microprobe and laser ablation inductively coupled plasma mass spectrometry. The sulfides occur enclosed in primary silicates, interstitial in the peridotite matrix, and associated with glass-bearing melt pockets. Monosulfide solid solutions are enriched in these xenoliths relative to pentlandite and intermediate solid solutions. Regardless of the textural occurrence, sulfide platinum-group element (PGE) patterns are distinguished into residual ([Pd/Ir]N 1 or [Pt/Pd]N 1), and unfractionated patterns. The coexistence of both residual and melt-like PGE signatures on a cm scale in a single sample implies that sulfides may record initial depletion and subsequent re-enrichment more effectively than constituent silicates do. Chalcophile and siderophile trace elements other than the PGEs are fractionated between the precipitated sulfide phases, but do not vary systematically with the PGE signatures, suggesting that the PGEs are comparatively sensitive to melting and depletion. In addition, Fe-rich hydroxides generated by sulfide breakdown due to atmospheric weathering display PGE systematics almost identical to their precursor sulfides, implying that they may be reliable tracers of mantle processes even after extensive weathering.Peer reviewe

In Situ Chalcophile and Siderophile Element Behavior in Sulfides from Moroccan Middle Atlas Spinel Peridotite Xenoliths during Metasomatism and Weathering

In situ chalcophile and siderophile major and trace elements were analyzed in sulfides from eight Moroccan Middle Atlas lherzolite xenoliths using electron microprobe and laser ablation inductively coupled plasma mass spectrometry. The sulfides occur enclosed in primary silicates, interstitial in the peridotite matrix, and associated with glass-bearing melt pockets. Monosulfide solid solutions are enriched in these xenoliths relative to pentlandite and intermediate solid solutions. Regardless of the textural occurrence, sulfide platinum-group element (PGE) patterns are distinguished into residual ([Pd/Ir]N 1 or [Pt/Pd]N 1), and unfractionated patterns. The coexistence of both residual and melt-like PGE signatures on a cm scale in a single sample implies that sulfides may record initial depletion and subsequent re-enrichment more effectively than constituent silicates do. Chalcophile and siderophile trace elements other than the PGEs are fractionated between the precipitated sulfide phases, but do not vary systematically with the PGE signatures, suggesting that the PGEs are comparatively sensitive to melting and depletion. In addition, Fe-rich hydroxides generated by sulfide breakdown due to atmospheric weathering display PGE systematics almost identical to their precursor sulfides, implying that they may be reliable tracers of mantle processes even after extensive weathering

Tracking crystal-melt segregation and magma recharge using zircon trace element data

The Cretaceous Yunshan caldera complex in SE China consists of an unusual coexisting assemblage of peraluminous and peralkaline rhyolites and a resurgent intra-caldera porphyritic quartz monzonite. In this study, we use zircon trace element data to study the compositional differences of zircons from cogenetic magmas and to track the evolution of the entire magmatic system. Our results indicate that the zircons from the peraluminous and peralkaline rhyolites formed from highly evolved compositions with high Hf concentrations and low Ti contents, and low Th/U and Zr/Hf ratios, which are distinct from those of the intrusive porphyritic quartz monzonite. Zircons from the peraluminous and peralkaline rhyolites display overlapping Zr/Hf and Hf, but the zircons from the peralkaline rhyolites have extremely low Eu/Eu* ratios (Peer reviewe

Uncovering and quantifying the subduction zone sulfur cycle from the slab perspective

Sulfur belongs among H2O, CO2, and Cl as one of the key volatiles in Earth’s chemical cycles. High oxygen fugacity, sulfur concentration, and δ34S values in volcanic arc rocks have been attributed to significant sulfate addition by slab fluids. However, sulfur speciation, flux, and isotope composition in slab-dehydrated fluids remain unclear. Here, we use high-pressure rocks and enclosed veins to provide direct constraints on subduction zone sulfur recycling for a typical oceanic lithosphere. Textural and thermodynamic evidence indicates the predominance of reduced sulfur species in slab fluids; those derived from metasediments, altered oceanic crust, and serpentinite have δ34S values of approximately −8‰, −1‰, and +8‰, respectively. Mass-balance calculations demonstrate that 6.4% (up to 20% maximum) of total subducted sulfur is released between 30–230 km depth, and the predominant sulfur loss takes place at 70–100 km with a net δ34S composition of −2.5 ± 3‰. We conclude that modest slab-to-wedge sulfur transport occurs, but that slab-derived fluids provide negligible sulfate to oxidize the sub-arc mantle and cannot deliver 34S-enriched sulfur to produce the positive δ34S signature in arc settings. Most sulfur has negative δ34S and is subducted into the deep mantle, which could cause a long-term increase in the δ34S of Earth surface reservoirs

Trace Elements in Magnetite from the Pagoni Rachi Porphyry Prospect, NE Greece: Implications for Ore Genesis and Exploration

Magnetite is a common accessory phase in various types of ore deposits. Its trace element content has proven to have critical implications regarding petrogenesis and as guides in the exploration for ore deposits in general. In this study we use LA-ICP-MS (laser ablation-inductively coupled plasma-mass spectrometry) analyses of trace elements to chemically characterize magnetite from the Pagoni Rachi Cu–Mo–Re–Au porphyry-style prospect, Thrace, northern Greece. Igneous magnetite mostly occurs as euhedral grains, which are commonly replaced by hematite in fresh to propylitic-altered granodiorite porphyry, whereas, hydrothermal magnetite forms narrow veinlets or is disseminated in sodic/potassic-calcic altered (albite + K-feldspar + actinolite + biotite + chlorite) granodiorite porphyry. Magnetite is commonly associated with chalcopyrite and pyrite and locally exhibits martitization. Laser ablation ICP-MS analyses of hydrothermal magnetite yielded elevated concentrations in several trace elements (e.g., V, Pb, W, Mo, Ta, Zn, Cu, and Nb) whereas Ti, Cr, Ni, and Sn display higher concentration in its magmatic counterpart. A noteworthy enrichment in Mo, Pb, and Zn is an unusual feature of hydrothermal magnetite from Pagoni Rachi. High Si, Al, and Ca values in a few analyses of hydrothermal magnetite imply the presence of submicroscopic or nano-inclusions (e.g., chlorite, and titanite). The trace element patterns of the hydrothermal magnetite and especially the decrease in its Ti content reflect an evolution from the magmatic towards the hydrothermal conditions under decreasing temperatures, which is consistent with findings from analogous porphyry-style deposits elsewhere

Trace element systematics and ore-forming processes in mafic VMS deposits: Evidence from the Troodos ophiolite, Cyprus

The volcanogenic massive sulfide (VMS) deposits in the Troodos ophiolite (Cyprus) are ancient analogues for modern day seafloor massive sulfide mineralisation formed in a supra-subduction zone environment. In this study we present the first detailed in situ study of trace elements in sulfides from twenty VMS deposits hosted in the Troodos ophiolite to better understand factors that influence the distribution, enrichment and incorporation of trace elements in different sulfide minerals. On a mineral scale, trace elements exhibit systematic variations between pyrite, chalcopyrite and sphalerite. Pyrite preferentially incorporates As, Sb, Au and Te, whilst chalcopyrite is enriched in Co and Se. Sphalerite is trace element poor with the exception of Ag and Cd. Selenium averages 278 ppm (n = 150) in chalcopyrite but only 42 ppm (n = 1322) in pyrite. Bismuth and Te in pyrite show a weak positive correlation (R2 = 0.35) in some VMS deposits possibly linked with the occurrence of Bi-telluride inclusions. Trace element concentrations also vary between colloform and euhedral pyrite, with an enrichment of Au, As, Sb, Cu and Zn in colloform compared to euhedral pyrite. Time resolved laser ablation profiles reveal that the trace element distribution on a mineral scale is not uniform and varies with crystallographic effects, fluctuating physicochemical fluid conditions such as temperature, pH, fS2, fO2 and ligand availability during sulfide precipitation. Incorporation mechanisms in sulfides differ between elements in pyrite, Ag, As, Se and Pb are hosted in solid solution or as nanoscale inclusions, whilst Au, Sb and Te may form micro-scale inclusions. On a regional scale (20 km) the distribution of trace elements exhibits systematic variations between three major structural domains; namely the Solea, Mitsero and Larnaca grabens. The VMS deposits of the magmatic-tectonic Solea graben are enriched in Se, Co, Te, Au and Cu relative to Mitsero, which is a purely extensional feature. Therefore, we hypothesise that a variable magmatic volatile influx related to a) ‘magma’ volume, b) migration of the magmatic-hydrothermal crack front and associated brine liberation or c) a variation in protolith metal concentration are responsible for regional scale variations in VMS geochemistry. This is suggested to be intrinsically linked to the spreading architecture of Troodos

Gold deposits in Greece: Hypogene ore mineralogy as a guide for precious and critical metal exploration

Gold deposits in Greece are spatially associated with back-arc/arc related volcanic, subvolcanic and plutonic rocks, which were controlled by extensional kinematic conditions when metamorphic core complexes in the Rhodope-Serbomacedonian- and Attico-Cycladic Massifs were uplifted to near surface levels over the south-westward retreating Hellenic subduction zone. Porphyry Cu-Mo-Au, high-intermediate sulfidation epithermal Au-Ag deposits and other intrusion-related proximal to distal systems (skarn, carbonate replacement, metamorphic rock-hosted quartz veins) are characterized by enrichment of trace metallic minerals like bismuth sulfosalts and Bi-sulfotellurides, precious- and base metal tellurides and Se-bearing phases, which can be considered as pathfinder minerals for gold as they are intimately associated with gold-bearing ores. Mineralogical studies of various styles of gold deposits in Greece can be applied as an exploration tool and selected examples from well described mineralization/deposits are presented here

MPI-DING reference glasses for in situ microanalysis: New reference values for element concentrations and isotope ratios

We present new analytical data of major and trace elements for the geological MPI-DING glasses KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, BM90/21-G, T1-G, and ATHO-G. Different analytical methods were used to obtain a large spectrum of major and trace element data, in particular, EPMA, SIMS, LA-ICPMS, and isotope dilution by TIMS and ICPMS. Altogether, more than 60 qualified geochemical laboratories worldwide contributed to the analyses, allowing us to present new reference and information values and their uncertainties (at 95% confidence level) for up to 74 elements. We complied with the recommendations for the certification of geological reference materials by the International Association of Geoanalysts (IAG). The reference values were derived from the results of 16 independent techniques, including definitive (isotope dilution) and comparative bulk (e.g., INAA, ICPMS, SSMS) and microanalytical (e.g., LA-ICPMS, SIMS, EPMA) methods. Agreement between two or more independent methods and the use of definitive methods provided traceability to the fullest extent possible. We also present new and recently published data for the isotopic compositions of H, B, Li, O, Ca, Sr, Nd, Hf, and Pb. The results were mainly obtained by high-precision bulk techniques, such as TIMS and MC-ICPMS. In addition, LA-ICPMS and SIMS isotope data of B, Li, and Pb are presented. Copyright 2006 by the American Geophysical Union

MPI-Ding reference glasses for in situ microanalysis: New reference values for element concentrations and isotope ratios

We present new analytical data of major and trace elements for the geological MPI-DING glasses KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, BM90/21-G, T1-G, and ATHO-G. Different analytical methods were used to obtain a large spectrum of major and trace element data, in particular, EPMA, SIMS, LA-ICPMS, and isotope dilution by TIMS and ICPMS. Altogether, more than 60 qualified geochemical laboratories worldwide contributed to the analyses, allowing us to present new reference and information values and their uncertainties (at 95% confidence level) for up to 74 elements. We complied with the recommendations for the certification of geological reference materials by the International Association of Geoanalysts (IAG). The reference values were derived from the results of 16 independent techniques, including definitive (isotope dilution) and comparative bulk (e.g., INAA, ICPMS, SSMS) and microanalytical (e.g., LA-ICPMS, SIMS, EPMA) methods. Agreement between two or more independent methods and the use of definitive methods provided traceability to the fullest extent possible. We also present new and recently published data for the isotopic compositions of H, B, Li, O, Ca, Sr, Nd, Hf, and Pb. The results were mainly obtained by high-precision bulk techniques, such as TIMS and MC-ICPMS. In addition, LA-ICPMS and SIMS isotope data of B, Li, and Pb are presented