Effects on egg production and quality of supplementing drinking water with calcium and magnesium

This study was conducted to appraise the effects on egg quality and production performance of laying hens when drinking water was supplemented with calcium (Ca) and magnesium (Mg). A total of 384 (64-week-old) Hy-line Brown laying hens were assigned at random to four treatments, which consisted of CON: unsupplemented drinking water; T1: drinking water + 2 mg/L Ca + 250 mg/L Mg; T2: drinking water + 4 mg/L Ca + 510 mg/L Mg /10 L; and T3: drinking water + 5 mg/L Ca and 760 mg/L Mg. The experiment lasted six weeks. Water intake increased linearly in week 1 with the rising levels of Ca and Mg in the drinking water. Increasing the Ca and Mg levels improved eggshell strength (week 2 (P =0.01), week 5 (P =0.01), and week 6 (P = 0.03), and eggshell thickness (week 6) (P =0.02) and reduced the rate at which eggs were broken (week 4) (P =0.01). The supplemental Ca and Mg did not affect egg production, egg weight, Haugh unit, albumen height, eggshell colour, and yolk colour compared with CON. Nor did they influence the Haugh unit and albumen height after storing for 1, 5, 10 and 15 days. In conclusion, adding Ca and Mg to the drinking water increased the thickness and strength of the eggshells

Observability and nonlinear filtering

This paper develops a connection between the asymptotic stability of nonlinear filters and a notion of observability. We consider a general class of hidden Markov models in continuous time with compact signal state space, and call such a model observable if no two initial measures of the signal process give rise to the same law of the observation process. We demonstrate that observability implies stability of the filter, i.e., the filtered estimates become insensitive to the initial measure at large times. For the special case where the signal is a finite-state Markov process and the observations are of the white noise type, a complete (necessary and sufficient) characterization of filter stability is obtained in terms of a slightly weaker detectability condition. In addition to observability, the role of controllability in filter stability is explored. Finally, the results are partially extended to non-compact signal state spaces

Common and gender-specific associations with cocaine use on gray matter volume: Data from the ENIGMA addiction working group

Gray matter volume (GMV) in frontal cortical and limbic regions is susceptible to cocaine-associated reductions in cocaine-dependent individuals (CD) and is negatively associated with duration of cocaine use. Gender differences in CD individuals have been reported clinically and in the context of neural responses to cue-induced craving and stress reactivity. The variability of GMV in select brain areas between men and women (e.g., limbic regions) underscores the importance of exploring interaction effects between gender and cocaine dependence on brain structure. Therefore, voxel-based morphometry data derived from the ENIGMA Addiction Consortium were used to investigate potential gender differences in GMV in CD individuals compared to matched controls (CTL). T1-weighted MRI scans and clinical data were pooled from seven sites yielding 420 gender- and age-matched participants: CD men (CDM, n = 140); CD women (CDW, n = 70); control men (CTLM, n = 140); and control women (CTLW, n = 70). Differences in GMV were assessed using a 2 × 2 ANCOVA, and voxelwise whole-brain linear regressions were conducted to explore relationships between GMV and duration of cocaine use. All analyses were corrected for age, total intracranial volume, and site. Diagnostic differences were predominantly found in frontal regions (CD < CTL). Interestingly, gender × diagnosis interactions in the left anterior insula and left lingual gyrus were also documented, driven by differences in women (CDW < CTLW). Further, lower right hippocampal GMV was associated with greater cocaine duration in CDM. Given the importance of the anterior insula to interoception and the hippocampus to learning contextual associations, results may point to gender-specific mechanisms in cocaine addiction

Outbreak of COVID-19 and SARS in mainland China: a comparative study based on national surveillance data

Objective To compare the epidemiological characteristics and transmission dynamics in relation to interventions against the COVID-19 and severe acute respiratory syndrome (SARS) outbreak in mainland China. Design Comparative study based on a unique data set of COVID-19 and SARS. Setting Outbreak in mainland China. Participants The final database included 82 858 confirmed cases of COVID-19 and 5327 cases of SARS. Methods We brought together all existing data sources and integrated them into a comprehensive data set. Individual information on age, sex, occupation, residence location, date of illness onset, date of diagnosis and clinical outcome was extracted. Control measures deployed in mainland China were collected. We compared the epidemiological and spatial characteristics of COVID-19 and SARS. We estimated the effective reproduction number to explore differences in transmission dynamics and intervention effects. Results Compared with SARS, COVID-19 affected more extensive areas (1668 vs 230 counties) within a shorter time (101 vs 193 days) and had higher attack rate (61.8 vs 4.0 per million persons). The COVID-19 outbreak had only one epidemic peak and one epicentre (Hubei Province), while the SARS outbreak resulted in two peaks and two epicentres (Guangdong Province and Beijing). SARSCoV-2 was more likely to infect older people (median age of 52 years), while SARS-CoV tended to infect young adults (median age of 34 years). The case fatality rate (CFR) of either disease increased with age, but the CFR of COVID-19 was significantly lower than that of SARS (5.6% vs 6.4%). The trajectory of effective reproduction number dynamically changed in relation to interventions, which fell below 1 within 2 months for COVID-19 and within 5.5 months for SARS. Conclusions China has taken more prompt and effective responses to combat COVID-19 by learning lessons from SARS, providing us with some epidemiological clues to control the ongoing COVID-19 pandemic worldwid

HighP–TNano-Mechanics of Polycrystalline Nickel

We have conducted highP–Tsynchrotron X-ray and time-of-flight neutron diffraction experiments as well as indentation measurements to study equation of state, constitutive properties, and hardness of nanocrystalline and bulk nickel. Our lattice volume–pressure data present a clear evidence of elastic softening in nanocrystalline Ni as compared with the bulk nickel. We show that the enhanced overall compressibility of nanocrystalline Ni is a consequence of the higher compressibility of the surface shell of Ni nanocrystals, which supports the results of molecular dynamics simulation and a generalized model of a nanocrystal with expanded surface layer. The analytical methods we developed based on the peak-profile of diffraction data allow us to identify “micro/local” yield due to high stress concentration at the grain-to-grain contacts and “macro/bulk” yield due to deviatoric stress over the entire sample. The graphic approach of our strain/stress analyses can also reveal the corresponding yield strength, grain crushing/growth, work hardening/softening, and thermal relaxation under highP–Tconditions, as well as the intrinsic residual/surface strains in the polycrystalline bulks. From micro-indentation measurements, we found that a low-temperature annealing (T < 0.4 Tm) hardens nanocrystalline Ni, leading to an inverse Hall–Petch relationship. We explain this abnormal Hall–Petch effect in terms of impurity segregation to the grain boundaries of the nanocrystalline Ni

Search for jet extinction in the inclusive jet-pT spectrum from proton-proton collisions at s=8 TeV

Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published articles title, journal citation, and DOI.The first search at the LHC for the extinction of QCD jet production is presented, using data collected with the CMS detector corresponding to an integrated luminosity of 10.7  fb−1 of proton-proton collisions at a center-of-mass energy of 8 TeV. The extinction model studied in this analysis is motivated by the search for signatures of strong gravity at the TeV scale (terascale gravity) and assumes the existence of string couplings in the strong-coupling limit. In this limit, the string model predicts the suppression of all high-transverse-momentum standard model processes, including jet production, beyond a certain energy scale. To test this prediction, the measured transverse-momentum spectrum is compared to the theoretical prediction of the standard model. No significant deficit of events is found at high transverse momentum. A 95% confidence level lower limit of 3.3 TeV is set on the extinction mass scale

Evolution of microstructure and crystallographic texture during dissimilar friction stir welding of duplex stainless steel to low carbon-manganese structural steel

Electron backscattered diffraction (EBSD) was used to analyze the evolution of microstructure and crystallographic texture during friction stir welding of dissimilar type 2205 duplex stainless steel (DSS) to type S275 low carbon-manganese structural steel. The results of microstructural analyses show that the temperature in the center of stirred zone reached temperatures between Ac 1 and Ac 3 during welding, resulting in a minor ferrite-to-austenite phase transformation in the S275 steel, and no changes in the fractions of ferrite and austenite in the DSS. Temperatures in the thermomechanically affected and shoulder-affected zones of both materials, in particular toward the root of the weld, did not exceed the Ac 1 of S275 steel. The shear generated by the friction between the material and the rotating probe occurred in austenitic/ferritic phase field of the S275 and DSS. In the former, the transformed austenite regions of the microstructure were transformed to acicular ferrite, on cooling, while the dual-phase austenitic/ferritic structure of the latter was retained. Studying the development of crystallographic textures with regard to shear flow lines generated by the probe tool showed the dominance of simple shear components across the whole weld in both materials. The ferrite texture in S275 steel was dominated by D 1, D 2, E, E¯ , and F, where the fraction of acicular ferrite formed on cooling showed a negligible deviation from the texture for the ideal shear texture components of bcc metals. The ferrite texture in DSS was dominated by D 1, D 2, I, I¯ , and F, and that of austenite was dominated by the A, A¯ , B, and B¯ of the ideal shear texture components for bcc and fcc metals, respectively. While D 1, D 2, and F components of the ideal shear texture are common between the ferrite in S275 steel and that of dual-phase DSS, the preferential partitioning of strain into the ferrite phase of DSS led to the development of I and I¯ components in DSS, as opposed to E and E¯ in the S275 steel. The formations of fine and ultrafine equiaxed grains were observed in different regions of both materials that are believed to be due to strain-induced continuous dynamic recrystallization (CDRX) in ferrite of both DSS and S275 steel, and discontinuous dynamic recrystallization (DDRX) in austenite phase of DSS