Evaluation of some process parameters for production of investment bar castings

This investigation aims at evaluating some process parameters for the production of aluminium alloy investment castings using polystyrene as pattern material and Plaster of Paris as investment slurry. The process parameters considered are the shell thickness, casting thickness and pouring temperature and the effect of varying these parameters on the mechanical properties of aluminium silicon magnesium alloy (A356) produced through the investment casting method is being investigated in this work. The effects of these variables were studied using design of experiments (D.O.E) via Taguchi’s L9 orthogonal array method. The castings produced were subjected to mechanical tests such as tensile strength, impact strength and hardness test using Monsanto tensometer and Avery impact and Avery hardness testing machines respectively. The results obtained were analysed using Minitab software 17. The results showed that the tensile strength, impact strength and hardness were optimum when the shell thickness was 5 mm, pouring temperature was 665oC and the bar cross section was 64 mm2 respectively. The investigation concludes that investment shell of thin thickness, casting thickness of smaller bar sections and lower pouring temperatures in the range of 665oC - 690oC were the most suitable parameters that produced optimum results with better mechanical properties in this study.Keywords: Investment casting, Polystyrene pattern, Plaster of Paris slurr

Probing the isovector transition strength of the low-lying nuclear excitations induced by inverse kinematics proton scattering

A compact approach based on the folding model is suggested for the determination of the isoscalar and isovector transition strengths of the low-lying ($\Delta S=\Delta T=0$) excitations induced by inelastic proton scattering measured with exotic beams. Our analysis of the recently measured inelastic $^{18,20}$O+p scattering data at $E_{\rm lab}=30$ and 43 MeV/nucleon has given for the first time an accurate estimate of the isoscalar $\beta_0$ and isovector $\beta_1$ deformation parameters (which cannot be determined from the (p,p') data alone by standard methods) for 2$^+_1$ and $3^-_1$ excited states in $^{18,20}$O. Quite strong isovector mixing was found in the 2$^+_1$ inelastic $^{20}$O+p scattering channel, where the strength of the isovector form factor $F_1$ (prototype of the Lane potential) corresponds to a $\beta_1$ value almost 3 times larger than $\beta_0$ and a ratio of nuclear transition matrix elements $M_n/M_p\simeq 4.2$.Comment: 5 pages, 3 figure

Faddeev calculations for the A=5,6 Lambda-Lambda hypernuclei

Faddev calculations are reported for Lambda-Lambda-5H, Lambda-Lambda-5He and Lambda-Lambda-6He in terms of two Lambda hyperons plus the respective nuclear clusters, using Lambda-Lambda central potentials considered in past non-Faddeev calculations of Lambda-Lambda-6He. The convergence with respect to the partial-wave expansion is studied, and comparison is made with some of these Lambda-Lambda hypernuclear calculations. The Lambda-Lambda Xi-N mixing effect is briefly discussed.Comment: submitted for publicatio

Exploring the Natural Variation for Seedling Traits and Their link with Seed Dimensions in Tomato

The success of germination, growth and final yield of every crop depends to a large extent on the quality of the seeds used to grow the crop. Seed quality is defined as the viability and vigor attribute of a seed that enables the emergence and establishment of normal seedlings under a wide range of environments. We attempt to dissect the mechanisms involved in the acquisition of seed quality, through a combined approach of physiology and genetics. To achieve this goal we explored the genetic variation found in a RIL population of Solanum lycopersicum (cv. Moneymaker) x Solanum pimpinellifolium through extensive phenotyping of seed and seedling traits under both normal and nutrient stress conditions and root system architecture (RSA) traits under optimal conditions. We have identified 62 major QTLs on 21 different positions for seed, seedling and RSA traits in this population. We identified QTLs that were common across both conditions, as well as specific to stress conditions. Most of the QTLs identified for seedling traits co-located with seed size and seed weight QTLs and the positive alleles were mostly contributed by the S. lycopersicum parent. Co-location of QTLs for different traits might suggest that the same locus has pleiotropic effects on multiple traits due to a common mechanistic basis. We show that seed weight has a strong effect on seedling vigor and these results are of great importance for the isolation of the corresponding genes and elucidation of the underlying mechanisms

Understanding Volumetric Water Storage in Monsoonal Wetlands of Northeastern Bangladesh

The volume of water stored in seasonal wetlands is a fundamental but difficult to measure variable for developing a physical understanding of wetland behavior. For seasonal wetlands that are a major source of water for rice and fish production, this physical understanding is key to planning for water-food security and ecosystem services. This study quantified variations in volumetric storage for the numerous seasonal wetlands of northeastern Bangladesh, locally known as “haors.” These haors receive transboundary runoff from densely vegetated and mountainous terrain in India and face persistent monsoonal cloud cover as they become full. We estimated volumetric storage for 13 haors by using extensive remote sensing data on water surface extent and elevation that was complemented with citizen-contributed gauge data. Assuming a trapezoidal bathymetry, an area-volume relationship was developed for selected haors. This relationship was assumed to be valid for extrapolating volumetric estimations over all the haors in the region. Results suggested that as haors get filled with the onset of monsoon rains, total estimated storage relative to the lowest observable level varied from 6.5 (±0.4) km3 in May to 30.9 (±2.0) km3 in July (peak of monsoon). Choosing a rectangular bathymetry can lead to 47% higher estimates compared to trapezoidal cross section. Estimating this intra-annual/interannual increase in storage is important for the region to plan water management policies that balance the human and ecosystem needs. Our analytical approach has potential for application to wetlands worldwide in light of the upcoming Surface Water and Ocean Topography (SWOT) mission

Time-integrated luminosity recorded by the BABAR detector at the PEP-II e+e- collider

This article is the Preprint version of the final published artcile which can be accessed at the link below.We describe a measurement of the time-integrated luminosity of the data collected by the BABAR experiment at the PEP-II asymmetric-energy e+e- collider at the ϒ(4S), ϒ(3S), and ϒ(2S) resonances and in a continuum region below each resonance. We measure the time-integrated luminosity by counting e+e-→e+e- and (for the ϒ(4S) only) e+e-→μ+μ- candidate events, allowing additional photons in the final state. We use data-corrected simulation to determine the cross-sections and reconstruction efficiencies for these processes, as well as the major backgrounds. Due to the large cross-sections of e+e-→e+e- and e+e-→μ+μ-, the statistical uncertainties of the measurement are substantially smaller than the systematic uncertainties. The dominant systematic uncertainties are due to observed differences between data and simulation, as well as uncertainties on the cross-sections. For data collected on the ϒ(3S) and ϒ(2S) resonances, an additional uncertainty arises due to ϒ→e+e-X background. For data collected off the ϒ resonances, we estimate an additional uncertainty due to time dependent efficiency variations, which can affect the short off-resonance runs. The relative uncertainties on the luminosities of the on-resonance (off-resonance) samples are 0.43% (0.43%) for the ϒ(4S), 0.58% (0.72%) for the ϒ(3S), and 0.68% (0.88%) for the ϒ(2S).This work is supported by the US Department of Energy and National Science Foundation, the Natural Sciences and Engineering Research Council (Canada), the Commissariat à l’Energie Atomique and Institut National de Physique Nucléaire et de Physiquedes Particules (France), the Bundesministerium für Bildung und Forschung and Deutsche Forschungsgemeinschaft (Germany), the Istituto Nazionale di Fisica Nucleare (Italy), the Foundation for Fundamental Research on Matter (The Netherlands), the Research Council of Norway, the Ministry of Education and Science of the Russian Federation, Ministerio de Ciencia e Innovación (Spain), and the Science and Technology Facilities Council (United Kingdom). Individuals have received support from the Marie-Curie IEF program (European Union) and the A.P. Sloan Foundation (USA)

Measurement of the B0-anti-B0-Oscillation Frequency with Inclusive Dilepton Events

The $B^0$-$\bar B^0$ oscillation frequency has been measured with a sample of 23 million \B\bar B pairs collected with the BABAR detector at the PEP-II asymmetric B Factory at SLAC. In this sample, we select events in which both B mesons decay semileptonically and use the charge of the leptons to identify the flavor of each B meson. A simultaneous fit to the decay time difference distributions for opposite- and same-sign dilepton events gives $\Delta m_d = 0.493 \pm 0.012{(stat)}\pm 0.009{(syst)}$ ps$^{-1}$.Comment: 7 pages, 1 figure, submitted to Physical Review Letter

An Application of the Concept of the Therapeutic Alliance To Sadomasochistic Pathology

This paper traces the history of the therapeutic alliance concept, examining how it has been used and misused, at times elevated to a central position and at others rejected altogether. The loss of this concept created a vacuum in classical psychoanalysis that has been filled by rival theories. The continuing usefulness of looking at the treatment process through the lens of the therapeutic alliance, particularly in relation to the manifold difficulties of working with sadomasochistic pathology, is suggested. To this end, revisions of the theory of the therapeutic alliance are suggested to address some of the difficulties that have arisen in conceptualizing this aspect of the therapeutic relationship, and to provide an integrated dynamic model for working with patients at each phase of treatment. This revised model acknowledges the complexity of the domain and encompasses the multiple tasks, functions, partners, and treatment phases involved. The utility of the revised theory is illustrated in application to understanding the sadomasochistic, omnipotent resistances of a female patient through the phases of her analysis.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66889/2/10.1177_00030651980460031301.pd