137 research outputs found
A new lab facility for measuring bidirectional reflectance/emittance distribution functions of soils and canopies
Recently, a laboratory measurement facility has been realized for assessing the anisotropic reflectance and emittance behaviour of soils, leaves and small canopies under controlled illumination conditions. The facility consists of an ASD FieldSpec 3 spectroradiometer covering the spectral range from 350 â 2500 nm at 1 nm spectral sampling interval. The spectroradiometer is deployed using a fiber optic cable with either a 1°, 8° or 25° instantaneous field of view (IFOV). These measurements can be used to assess the plant pigment (chlorophyll, xanthophyll, etc.) and non-pigment system (water, cellulose, lignin, nitrogen, etc.). The thermal emittance is measured using a NEC TH9100 Infrared Thermal Imager. It operates in a single band covering the spectral range from 8 â 14 mm with a resolution of 0.02 K. Images are 320 (H) by 240 (V) pixels with an IFOV of 1.2 mrad. A 1000 W Quartz Tungsten Halogen (QTH) lamp is used as illumination source, approximating the radiance distribution of the sun. This one is put at a fixed position during a measurement session. Multi-angular measurements are achieved by using a robotic positioning system allowing to perform either reflectance or emittance measurements over almost a complete hemisphere. The hemisphere can be sampled continuously between 0° and 80° from nadir and up to a few degrees from the hot-spot configuration (depending on the IFOV of the measurement device) for a backscattering target. Measurement distance to targets can be varied between 0.25 and 1 m, although with a distance of more than 0.6 m it is not possible to cover the full hemisphere. The goal is to infer the BRDF (bidirectional reflectance distribution function) and BTDF (bidirectional thermal distribution function) from these multi-angular measurements for various surface types (like soils, agricultural crops, small tree canopies and artificial objects) and surface roughness. The steering of the robotic arm and the reading of the spectroradiometer and the thermal camera are all fully automated
Structural modulation in potassium birnessite single crystals
We report on the growth of single-crystal potassium birnessite
(K0.31MnO2*0.41H2O) and present both the average and local structural
characterization of this frustrated magnetic system. Single crystals were
obtained employing a flux growth method with a KNO3/B2O3 flux at 700 {\deg}C.
Single-crystal X-ray diffraction revealed an average orthorhombic symmetry,
with space group Cmcm. A combination of high angle annular dark field scanning
transmission electron microscopy (HAADF-STEM) with atomic resolution energy
dispersive X-ray spectroscopy (EDS) demonstrated the layered structure of
potassium birnessite with manganese-containing planes well separated by layers
of potassium atoms. MnO6 octahedra and the K/H2O planes were clearly imaged via
integrated differential phase contrast (iDPC) STEM. Furthermore, iDPC-STEM also
revealed the existence of local domains with alternating contrast of the
manganese oxide planes, most likely originating from charge ordering of Mn3+
and Mn4+ along the c-axis. These charge-ordered domains are clearly correlated
with a reduction in the c-lattice parameter compared to the rest of the matrix.
The insight gained from this work allows for a better understanding of the
correlation between structure and magnetic properties.Comment: A high-resolution version with supplementary information can be found
at
https://pubs.rsc.org/en/content/articlelanding/2021/TC/D0TC05396A#!divAbstrac
Measurement of the production of charged pions by protons on a tantalum target
A measurement of the double-differential cross-section for the production of
charged pions in proton--tantalum collisions emitted at large angles from the
incoming beam direction is presented. The data were taken in 2002 with the HARP
detector in the T9 beam line of the CERN PS. The pions were produced by proton
beams in a momentum range from 3 \GeVc to 12 \GeVc hitting a tantalum target
with a thickness of 5% of a nuclear interaction length. The angular and
momentum range covered by the experiment (100 \MeVc \le p < 800 \MeVc and
0.35 \rad \le \theta <2.15 \rad) is of particular importance for the design
of a neutrino factory. The produced particles were detected using a
small-radius cylindrical time projection chamber (TPC) placed in a solenoidal
magnet. Track recognition, momentum determination and particle identification
were all performed based on the measurements made with the TPC. An elaborate
system of detectors in the beam line ensured the identification of the incident
particles. Results are shown for the double-differential cross-sections
at four incident
proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). In addition, the
pion yields within the acceptance of typical neutrino factory designs are shown
as a function of beam momentum. The measurement of these yields within a single
experiment eliminates most systematic errors in the comparison between rates at
different beam momenta and between positive and negative pion production.Comment: 49 pages, 31 figures. Version accepted for publication on Eur. Phys.
J.
Leading order analysis of neutrino induced dimuon events in the CHORUS experiment
We present a leading order QCD analysis of a sample of neutrino induced
charged-current events with two muons in the final state originating in the
lead-scintillating fibre calorimeter of the CHORUS detector. The results are
based on a sample of 8910 neutrino and 430 antineutrino induced opposite-sign
dimuon events collected during the exposure of the detector to the CERN Wide
Band Neutrino Beam between 1995 and 1998. % with GeV
and GeV collected %between 1995 and 1998. The analysis yields a
value of the charm quark mass of \mc = (1.26\pm 0.16 \pm 0.09) \GeVcc and a
value of the ratio of the strange to non-strange sea in the nucleon of , improving the results obtained in similar analyses
by previous experiments.Comment: Submitted to Nuclear Physics
The trigger system of the CHORUS experiment
A new apparatus for detection of oscillation has been successfully constructed and operated by the CHORUS Collaboration for the CERN-WA95 experiment. The design , implementation and performance of the electronic trigger system is described. A trigger efficiency of 99 was measured for charged current events and 90 for neutral current e vents
The data acquisition system of the CHORUS experiment
In the years 1994-1998 the CHORUS Collaboration has recorded data in the CERN WA95 experiment. Here we describe the data acquisition system that has been used, featuring concurrent hierarchical state machines, a remote operating system, a buffer manager, a dispatcher, a control panel and a supervisor
Associated Charm Production in Neutrino-Nucleus Interactions
In this paper a search for associated charm production both in neutral and
charged current -nucleus interactions is presented. The improvement of
automatic scanning systems in the {CHORUS} experiment allows an efficient
search to be performed in emulsion for short-lived particles. Hence a search
for rare processes, like the associated charm production, becomes possible
through the observation of the double charm-decay topology with a very low
background. About 130,000 interactions located in the emulsion target
have been analysed. Three events with two charm decays have been observed in
the neutral-current sample with an estimated background of 0.180.05. The
relative rate of the associated charm cross-section in deep inelastic
interactions, has been
measured. One event with two charm decays has been observed in charged-current
interactions with an estimated background of 0.180.06 and the
upper limit on associated charm production in charged-current interactions at
90% C.L. has been found to be .Comment: 10 pages, 4 figure
Charged-Particle Multiplicities in Charged-Current Neutrino-- and Anti-Neutrino--Nucleus Interactions
The CHORUS experiment, designed to search for
oscillations, consists of a nuclear emulsion target and electronic detectors.
In this paper, results on the production of charged particles in a small sample
of charged-current neutrino-- and anti-neutrino--nucleus interactions at high
energy are presented. For each event, the emission angle and the ionization
features of the charged particles produced in the interaction are recorded,
while the standard kinematic variables are reconstructed using the electronic
detectors. The average multiplicities for charged tracks, the pseudo-rapidity
distributions, the dispersion in the multiplicity of charged particles and the
KNO scaling are studied in different kinematical regions. A study of
quasi-elastic topologies performed for the first time in nuclear emulsions is
also reported. The results are presented in a form suitable for use in the
validation of Monte Carlo generators of neutrino--nucleus interactions.Comment: 17 pages, 5 figure
The data acquisition system of the CHORUS experiment
In the years 1994--1998 the CHORUS Collaboration has recorded data in the CERN WA95 experiment. Here we describe the data acquisition system that has been used, featuring concurrent hierarchical state machines, a remote operating system, a buffer manager, a dispatcher, a control panel and a supervisor
- âŠ