Depressive Symptoms and Amygdala Volume in Elderly with Cerebral Small Vessel Disease: The RUN DMC Study

Introduction. Late onset depressive symptoms (LODSs) frequently occur in elderly with cerebral small vessel disease (SVD). SVD cannot fully explain LODS; a contributing factor could be amygdala volume. We investigated the relation between amygdala volume and LODS, independent of SVD in 503 participants with symptomatic cerebral SVD. Methods. Patients underwent FLAIR and T1 scanning. Depressive symptoms were assessed with structured questionnaires; amygdala and WML were manually segmented. The relation between amygdala volume and LODS/EODS was investigated and adjusted for age, sex, intracranial volume, and SVD. Results. Patients with LODS had a significantly lower left amygdala volume than those without (P = 0.02), independent of SVD. Each decrease of total amygdala volume (by mL) was related to an increased risk of LODS (OR = 1.77; 95% CI 1.02–3.08; P = 0.04). Conclusion. Lower left amygdala volume is associated with LODS, independent of SVD. This may suggest differential mechanisms, in which individuals with a small amygdala might be vulnerable to develop LODS

Optimized Trigger for Ultra-High-Energy Cosmic-Ray and Neutrino Observations with the Low Frequency Radio Array

When an ultra-high energy neutrino or cosmic ray strikes the Lunar surface a radio-frequency pulse is emitted. We plan to use the LOFAR radio telescope to detect these pulses. In this work we propose an efficient trigger implementation for LOFAR optimized for the observation of short radio pulses.Comment: Submitted to Nuclear Instruments and Methods in Physics Research Section

LOFAR Sparse Image Reconstruction

Context. The LOw Frequency ARray (LOFAR) radio telescope is a giant digital phased array interferometer with multiple antennas distributed in Europe. It provides discrete sets of Fourier components of the sky brightness. Recovering the original brightness distribution with aperture synthesis forms an inverse problem that can be solved by various deconvolution and minimization methods Aims. Recent papers have established a clear link between the discrete nature of radio interferometry measurement and the "compressed sensing" (CS) theory, which supports sparse reconstruction methods to form an image from the measured visibilities. Empowered by proximal theory, CS offers a sound framework for efficient global minimization and sparse data representation using fast algorithms. Combined with instrumental direction-dependent effects (DDE) in the scope of a real instrument, we developed and validated a new method based on this framework Methods. We implemented a sparse reconstruction method in the standard LOFAR imaging tool and compared the photometric and resolution performance of this new imager with that of CLEAN-based methods (CLEAN and MS-CLEAN) with simulated and real LOFAR data Results. We show that i) sparse reconstruction performs as well as CLEAN in recovering the flux of point sources; ii) performs much better on extended objects (the root mean square error is reduced by a factor of up to 10); and iii) provides a solution with an effective angular resolution 2-3 times better than the CLEAN images. Conclusions. Sparse recovery gives a correct photometry on high dynamic and wide-field images and improved realistic structures of extended sources (of simulated and real LOFAR datasets). This sparse reconstruction method is compatible with modern interferometric imagers that handle DDE corrections (A- and W-projections) required for current and future instruments such as LOFAR and SKAComment: Published in A&A, 19 pages, 9 figure

Imaging Jupiter's radiation belts down to 127 MHz with LOFAR

Context. Observing Jupiter's synchrotron emission from the Earth remains today the sole method to scrutinize the distribution and dynamical behavior of the ultra energetic electrons magnetically trapped around the planet (because in-situ particle data are limited in the inner magnetosphere). Aims. We perform the first resolved and low-frequency imaging of the synchrotron emission with LOFAR at 127 MHz. The radiation comes from low energy electrons (~1-30 MeV) which map a broad region of Jupiter's inner magnetosphere. Methods (see article for complete abstract) Results. The first resolved images of Jupiter's radiation belts at 127-172 MHz are obtained along with total integrated flux densities. They are compared with previous observations at higher frequencies and show a larger extent of the synchrotron emission source (>=4 $R_J$). The asymmetry and the dynamic of east-west emission peaks are measured and the presence of a hot spot at lambda_III=230 {\deg} $\pm$ 25 {\deg}. Spectral flux density measurements are on the low side of previous (unresolved) ones, suggesting a low-frequency turnover and/or time variations of the emission spectrum. Conclusions. LOFAR is a powerful and flexible planetary imager. The observations at 127 MHz depict an extended emission up to ~4-5 planetary radii. The similarities with high frequency results reinforce the conclusion that: i) the magnetic field morphology primarily shapes the brightness distribution of the emission and ii) the radiating electrons are likely radially and latitudinally distributed inside about 2 $R_J$. Nonetheless, the larger extent of the brightness combined with the overall lower flux density, yields new information on Jupiter's electron distribution, that may shed light on the origin and mode of transport of these particles.Comment: 10 pages, 12 figures, accepted for publication in A&A (27/11/2015) - abstract edited because of limited character

Continuum source catalog for the first APERTIF data release

The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary beam model using a machine learning approach, Gaussian process regression. The primary beam models obtained with this method are published along with the data products for the first Apertif data release. We apply the method to the continuum images, mosaic them and extract the source catalog. The catalog contains 249672 radio sources many of which are detected for the first time at these frequencies. We cross-match the coordinates with the NVSS, LOFAR/DR1/value-added and LOFAR/DR2 catalogs resulting in 44523, 22825 and 152824 common sources respectively. The first sample provides a unique opportunity to detect long term transient sources which have significantly changed their flux density for the last 25 years. The second and the third ones combined together provide information about spectral properties of the sources as well as the redshift estimates.Comment: 12 pages, 9 figures; accepted for publication in A&

Patterns of plant phenology in Amazonian seasonally flooded and unflooded forests

Few studies have successfully monitored community-wide phenological patterns in seasonally flooded Amazonian várzea forests, where a prolonged annual flood pulse arguably generates the greatest degree of seasonality of any low-latitude ecosystem on Earth. We monitored the vegetative and reproductive plant phenology of várzea (VZ) floodplain and adjacent terra firme (TF) forests within two contiguous protected areas in western Brazilian Amazonia, using three complementary methods: monthly canopy observations of 1056 individuals (TF: 556, VZ: 500), twice monthly collections from 0.5-m2 litterfall traps within two 100-ha plots (1 TF, 1 VZ; 96 traps per plot), and monthly ground surveys of residual fruit-fall along transect-grids within each 100-ha plot (12 km per plot). Surveys encompassed the entire annual flood cycle and employed a floating trap design to cope with fluctuating water levels. Phenology patterns were generally similar in both forest types. Leaffall peaked during the aquatic phase in várzea forest and the dry season in terra firme. Flowering typically followed leaffall and leaf flush, extending into the onset of the terrestrial phase and rainy season in várzea and terra firme, respectively. Abiotic seed dispersal modes were relatively more prevalent in várzea than terra firme; the main contrast in fruiting seasonality was more likely a result of differences in community composition and relative abundance of seed dispersal modes than differences within individual genera. We emphasize the difficulty in distinguishing the role of the flood pulse from other seasonal environmental variables without multiannual data or spatially replicated studies across the spectrum of Amazonian forest types

Characterising the Apertif primary beam response

Context. Phased array feeds (PAFs) are multi-element receivers in the focal plane of a telescope that make it possible to simultaneously form multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently, the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers to carry out several observing programs, including two imaging surveys and a time-domain survey. The Apertif imaging surveys use a configuration of 40 partially overlapping compound beams (CBs) simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This work is aimed at characterising the response of the 40 Apertif CBs to create frequency-resolved I, XX, and YY polarization empirical beam shapes. The measured CB maps can be used for the image deconvolution, primary beam correction, and mosaicking processes of Apertif imaging data. Methods. We used drift scan measurements to measure the response of each of the 40 Apertif CBs. We derived beam maps for all individual beams in I, XX, and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sampled the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derived beam maps for each individual WSRT dish. Results. We present the frequency and time dependence of the beam shapes and sizes. We compared the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods

Characterising the Apertif primary beam response

Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlapping compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.Comment: Accepted for publication by A&A, 14 pages, 15 figure

First release of Apertif imaging survey data

Context. Apertif is a phased-array feed system for the Westerbork Synthesis Radio Telescope, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program utilizing this upgrade started on 1 July 2019, with the last observations taken on 28 February 2022. The imaging survey component provides radio continuum, polarization, and spectral line data. Aims. Public release of data is critical for maximizing the legacy of a survey. Toward that end, we describe the release of data products from the first year of survey operations, through 30 June 2020. In particular, we focus on defining quality control metrics for the processed data products. Methods. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products and provide flags indicating the quality of those data products. Results. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams (of 7640 considered) are released. The median noise in the continuum images is 41.4 uJy beam−1, with a slightly lower median noise of 36.9 uJy beam−1 in the Stokes V polarization image. The median angular resolution is 11.6″/sin δ. The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy beam−1, corresponding to a 3-σ H I column density sensitivity of 1.8 × 1020 atoms cm−2 over 20 km s−1 (for a median angular resolution of 24″ × 15″). Line cubes at lower frequency have slightly higher noise values, consistent with the global RFI environment and overall Apertif system performance. We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface and can be queried using a variety of standard tools