181 research outputs found

    Edge and face linear vibration welding of wood panels

    Get PDF
    Edge-to-edge linear vibration welding of particle- board, OSB, MDF and plywood gives better strength than face-to-face panel welding. In general, the edge-to-edge weldline is slightly weaker than the panels itself. The face- to-face weldline is stronger than the strength of the material in the same direction

    Surface finishes by mechanically induced wood surface fusion

    Get PDF
    Mechanically induced vibration wood fusion welding techniques can also be used to obtain wood surface finishes of increased surface hardness and performance in presence of polymerizing unsaturated oils such as sunflower oil, or other polymerizing finishes. Wood surface hardness values more than double than those for the untreated control timber can be obtained by this method. This result is obtained due to two effects induced by the sharp increase in temperature induced by the mechanical welding vibration (i) the polymerization to a hardened network of the unsaturated oil and (ii) the densification proven to occur in the surface layer of the timber during mechanically-induced vibration-welding. The first of these effects predominates at shorter welding times while at slightly longer welding times both effects occur with the second one progressively becoming the bigger contributor. In the latter case the some μm thin densified surface is a surface composite formed by the networked unsaturated oil permeating the wood fibre/fused lignin composite. © Springer-Verlag 2005

    No association between fear of hypoglycemia and blood glucose variability in type 1 diabetes: The cross-sectional VARDIA study

    Get PDF
    AIMS: In type 1 diabetes (T1D), treatment efficacy is limited by the unpredictability of blood glucose results and glycemic variability (GV). Fear of Hypoglycemia (FOH) remains a major brake for insulin treatment optimization. We aimed to assess the association of GV with FOH in participants with T1D in an observational cross-sectional study performed in 9 French Diabetes Centres (NCT02790060). METHODS: Participants were T1D for ≥5 years, aged 18-75 years, on stable insulin therapy for ≥3 months. The coefficient of variation (CV) of blood glucose and mean amplitude of glycemic excursions (MAGE) were used to assess GV from 7-point self-monitoring of blood glucose (SMBG). FOH was assessed using the validated French version of the Hypoglycemia Fear Survey-II (HFS-II) questionnaire. RESULTS: Among a total of 570 recruited participants, 298 were suitable for analysis: 46% women, 58% on continuous subcutaneous insulin infusion [CSII], mean age 49 ± 16 years, HbA1c 7.5 ± 0.9%, HFS-II score 67 ± 18 and 12% with recent history of severe hypoglycemia during the previous 6 months, mean CV 39.8 ± 9.7% and MAGE 119 ± 42 mg/dL. CV and MAGE did not significantly correlate with HFS-II score (R = -0.05;P = 0.457 and R = 0.08;P = 0.170). Participants with severe hypoglycemia in the previous 6 months had higher HFS scores. Participants with higher HFS scores presented more hypoglycemias during follow-up. CONCLUSIONS: FOH as determined using the HFS-II questionnaire was not associated with 7-point SMBG variability in participants with T1D, but was associated with a positive history of severe hypoglycemia. Higher FOH was associated with higher frequency of hypoglycemia during follow-up

    Tannin- caprolactam and Tannin- PEG formulations as outdoor wood preservatives: Weathering properties

    Get PDF
    International audienceAbstractKey messageThis article presents the leaching, fire and weathering resistance improvements of samples treated with tannin-based wood preservatives added of caprolactam. PEG-added formulations show limited applicability. The FT-IR and13C-NMR analyses of the caprolactam-added formulations show some evidences of copolymerization.ContextTannin-boron wood preservatives are known for their high resistance against leaching, biological attacks, fire as well as for the good mechanical properties that they impart to wood. These properties promoted these formulations for being a candidate for the protection of green buildings. However, the low elasticity of these polymers and their dark colour implied limited weathering resistances.AimsThe aim of the study is to find suitable additives for tannin-based formulations to overcome their limited weathering resistances, without compromising the other properties.MethodsTreatment, leaching and fire tests, dimensional stability as well as artificial and natural weathering of the timber treated with caprolactam-added and PEG-added formulations were performed. FT-IR and 13C-NMR of the formulations were presented.ResultsThe presence of caprolactam improved the properties of the formulation with particularly significant results in terms of resistance against leaching and dimensional stability. These enhancements were imparted also to the weathering resistance of the tannin-caprolactam formulations. Indeed, the colour changes during the artificial and natural exposures were stable for longer periods. FT-IR and 13C-NMR investigations of the advanced formulations were led, and covalent copolymerization of the caprolactam with the tannin-hexamine polymer was observed.ConclusionThe tannin formulations with caprolactam improved the durability of the wood specimens, while the PEG-tannin presented strong application drawbacks

    Understanding coronal heating and solar wind acceleration: Case for in situ near‐Sun measurements

    Get PDF
    Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/94903/1/rog1641.pd

    Predictors of hospital discharge and mortality in patients with diabetes and COVID-19: updated results from the nationwide CORONADO study

    Get PDF
    AIMS/HYPOTHESIS: This is an update of the results from the previous report of the CORONADO (Coronavirus SARS-CoV-2 and Diabetes Outcomes) study, which aims to describe the outcomes and prognostic factors in patients with diabetes hospitalised for coronavirus disease-2019 (COVID-19). METHODS: The CORONADO initiative is a French nationwide multicentre study of patients with diabetes hospitalised for COVID-19 with a 28-day follow-up. The patients were screened after hospital admission from 10 March to 10 April 2020. We mainly focused on hospital discharge and death within 28 days. RESULTS: We included 2796 participants: 63.7% men, mean age 69.7 ± 13.2 years, median BMI (25th-75th percentile) 28.4 (25.0-32.4) kg/m(2). Microvascular and macrovascular diabetic complications were found in 44.2% and 38.6% of participants, respectively. Within 28 days, 1404 (50.2%; 95% CI 48.3%, 52.1%) were discharged from hospital with a median duration of hospital stay of 9 (5-14) days, while 577 participants died (20.6%; 95% CI 19.2%, 22.2%). In multivariable models, younger age, routine metformin therapy and longer symptom duration on admission were positively associated with discharge. History of microvascular complications, anticoagulant routine therapy, dyspnoea on admission, and higher aspartate aminotransferase, white cell count and C-reactive protein levels were associated with a reduced chance of discharge. Factors associated with death within 28 days mirrored those associated with discharge, and also included routine treatment by insulin and statin as deleterious factors. CONCLUSIONS/INTERPRETATION: In patients with diabetes hospitalised for COVID-19, we established prognostic factors for hospital discharge and death that could help clinicians in this pandemic period. TRIAL REGISTRATION: Clinicaltrials.gov identifier: NCT04324736

    OXIDATION AND CATALYCITY OF THERMAL PROTECTION MATERIALS AT HIGH TEMPERATURE

    No full text

    Production of metallic nanopowders (Mg, Al) by solar carbothermal reduction of their oxides at low pressure

    Get PDF
    The carbothermal reduction of MgO and Al2O3 in argon flow at low pressure allows to lower the onset temperature of metal vapor formation. Thermodynamic calculations indicate that metal formation begins at 1400 and 1700 K for a primary vacuum (1000 Pa), respectively, for Mg and Al. In the experimental section, concentrated solar energy was used for the process heating in order to favor energy savings. The products of the reaction between MgO or Al2O3 and 2 varieties of carbon (graphite, carbon black) in flowing argon atmosphere at a total pressure of around 1000 to 1600 Pa were studied using X-ray diffraction, and microstructure observations revealed the formation of metallic nanopowders with some by-products. Metallic conversions close to 45 wt% and 52 wt%, respectively, for Mg and Al, were obtained. The low conversion yield of the carbothermal reduction of MgO can be attributed to a backward reaction reforming MgO powder and to a sintering process between oxide particles at high temperature. Aluminum production challenge is to avoid formation of undesired by-products: Al2O, Al4C3 and Al-oxycarbides. Advantages and weaknesses of the used process are described and some improvements are proposed to increase metallic yields
    corecore