Regional and temporal changes in bivalve diversity off the south coast of Portugal

12 pages, 8 figures.-- Printed version published Dec 10, 2008.From 2000 to 2006, a total of 75 bivalve species were identified, varying from 29 (spring 2001) to 54 species (spring 2005) per year. Seasonal tendencies in diversity varied according the year, thus the interpretation of long-term and regional scales is essential before drawing any conclusions in other studies. Richness and diversity consistently decreased with depth and increased with sediment grain size (from low in very coarse sand to high in coarse silt). Diversity decreased progressively from 3 to 16 m depth, thus the harsher shallower environments (due to waves and tidal air exposure) showed greater diversity than the most stable areas. Communities in finer sediments were more diverse than those in coarser sand. Evenness showed patterns opposite to diversity, overall.Diversity and evenness maps (produced with multivariate universal kriging), showed that most geographic areas with greater diversity were farer from river outflows and wastewater treatment plants. Two types of geographic pattern were observed: areas with persistently greater bivalve diversity through time and areas that changed locally from year to year. This spatial analysis can be used to establish priority conservation areas for management purposes, and to analyse the persistency of regional diversity patterns. The area with most habitat heterogeneity (Sotavento) corresponded to greatest diversity.There was a positive relationship between Spisula solida and Chamelea gallina landings and bivalve diversity 2 years and 1 year later, respectively. Possibly, local fisheries, by selectively withdrawing the commercial numerically dominant species from the ecosystem, increased diversity 1 to 2 years later, as the ecological niches of the dominants are quickly filled by several other species thereby creating a more even community. On regional scales, no significant impact was found on long-term bivalve diversity in local fisheries.This work was part of an MMR Post-doc program financed by Fundação para a Ciência e a Tecnologia BPD /14935/ 2004.Peer reviewe

Regional and temporal changes in bivalve diversity off the south coast of Portugal

12 pages, 8 figures.-- Printed version published Dec 10, 2008.From 2000 to 2006, a total of 75 bivalve species were identified, varying from 29 (spring 2001) to 54 species (spring 2005) per year. Seasonal tendencies in diversity varied according the year, thus the interpretation of long-term and regional scales is essential before drawing any conclusions in other studies. Richness and diversity consistently decreased with depth and increased with sediment grain size (from low in very coarse sand to high in coarse silt). Diversity decreased progressively from 3 to 16 m depth, thus the harsher shallower environments (due to waves and tidal air exposure) showed greater diversity than the most stable areas. Communities in finer sediments were more diverse than those in coarser sand. Evenness showed patterns opposite to diversity, overall.Diversity and evenness maps (produced with multivariate universal kriging), showed that most geographic areas with greater diversity were farer from river outflows and wastewater treatment plants. Two types of geographic pattern were observed: areas with persistently greater bivalve diversity through time and areas that changed locally from year to year. This spatial analysis can be used to establish priority conservation areas for management purposes, and to analyse the persistency of regional diversity patterns. The area with most habitat heterogeneity (Sotavento) corresponded to greatest diversity.There was a positive relationship between Spisula solida and Chamelea gallina landings and bivalve diversity 2 years and 1 year later, respectively. Possibly, local fisheries, by selectively withdrawing the commercial numerically dominant species from the ecosystem, increased diversity 1 to 2 years later, as the ecological niches of the dominants are quickly filled by several other species thereby creating a more even community. On regional scales, no significant impact was found on long-term bivalve diversity in local fisheries.This work was part of an MMR Post-doc program financed by Fundação para a Ciência e a Tecnologia BPD /14935/ 2004.Peer reviewe

Materiais de construção e materiais líticos nas práticas funerárias neolíticas da serra da Boa Viagem (Centro-Oeste de Portugal). O caso do monumento megalítico do Cabeço dos Moinhos, Figueira da Foz

Este trabalho contribui para o conhecimento do Neolítico do Centro-Oeste português. O caso de estudo foi o monumento megalítico do Cabeço dos Moinhos, edificado na serra da Boa Viajem, no que é hoje a freguesia da Brenha, concelho da Figueira da Foz. Para além de ser óbvio que esta região se encontrava, durante o Neolítico, no limiar de diferentes mundos culturais, o meridional e o setentrional, a partir das matérias usadas na construção do monumento e das matérias usadas no fabrico de oferendas líticas e de objetos de adorno, teceram-se algumas considerações relacionadas com as práticas funerárias, os modos de vida e de vivenciar o mundo por parte das comunidades neolíticas que aqui ergueram estes monumentos. Em relação às oferendas líticas notou-se a ausência de traços de uso o que indicia que foram fabricadas apenas para ritos funerários. Além do simbolismo intrínseco às formas, as diferentes matérias em que foram construídos (locais, regionais e inter-regionais) indiciam a importância da interligação física e simbólica das comunidades locais com lugares próximos e remotos, o que não será alheio a um modo de vida com grande abertura ao mundo exterior e, talvez, pouco sedentarizado . O mesmo se poderá interpretar em termos arquitetónicos pois, se a construção sobre um afloramento calcário e em local culminante poderá revelar assimilação das propriedades inerentes ao local e à matéria aí existente, a reunião de matérias de diferentes proveniências na câmara/corredor implicará uma interligação física e mental entre os diferentes lugares vivenciados pelos seus construtores, ou seja, entre lugares de habitat, de subsistência e de veneração dos espíritos dos antepassados.This paper contributes to the understanding of the Neolithic burial practices in Western Central Portugal. It relies on the reviewing of Santos Rocha texts, which describes research carried out in the megalithic monument of Cabeço dos Moinhos (Brenha, Figueira da Foz), fieldwork and the study of bone remains and “offerings” that were found in the monument. Cabeço dos Moinhos tomb was built on a limestone outcrop located in a hill placed on the ridgeline of Serra da Boa Viagem. From this hill there is a wide visibility to the sandy coastal plain (to the north) and to the Baixo Mondego area (to the south). Under a mound of "yellowish soil without mixture" a polygonal chamber with corridor oriented east was built. The standing stones were made of greyish white limestone (local) and of whitish, greyish, yellowish and reddish sandstone. The last two are sourced from slopes located more than 250m south of the tomb. Santos Rocha (1949: 14) found some "skeletons lying in gravel beds" and rare burnt bones. The dead were buried together with pottery, lithic and bone objects. Some of these indicate a reutilization of the monument during the Chalcolithic. The absence of use-wear in the majority of the lithics suggests that they were produced only for the burial practices. In addition to the symbolism intrinsic to morphologies, the use of different “raw” materials suggests the importance of the reunion of their own properties at the time of the burial, setting a symbolic and physical interconnection between local communities and near and remote places. The same reasoning can be applied to the architecture of the monument: if its construction on a limestone outcrop which is a culminating spot suggests the assimilation of the properties associated to the place and to the matter that exists there, the presence of “raw” materials from different sources among the standing stones of the chamber and the corridor imply a mental and physical interconnection between different places experienced by the builders. The visualized landscape must also have been significant to the people who built and attended the Cabeço dos Moinhos megalithic monument.info:eu-repo/semantics/publishedVersio

Fuzzy Method for in Control Acetaldehyde Generation in Resin Pet in the Process of Packaging Pre-Forms of Plastic Injection

In order to control the drying temperature of the PET resin in the silo of the plastic injection molding machine, during the plastic injection process in the industries producing preforms for the manufacture of beverage bottles, care is taken in the ideal temperature regulation for the better performance in controlling the generation of Acetaldehyde (AA), which alters the taste of carbonated or non-carbonated drinks, providing a citrus nuance to the palate and questioning the quality of the packaged products The objective of this work is to develop a tool based on Fuzzy logic to support the control of the drying temperature of PET resin, allowing specialists to make the ideal temperature control decisions necessary to control the generation of Acetaldehyde (AA). For the development of the proposed Fuzzy inference model, we used the Matlab Fuzzy toolbox tool, where the input variables, the fuzzyfication rules and the output variable were implemented based on the data collected from the preform injection process. From the inference model, we obtained a more precise management of the variables that influence the generation of AA, estimating a reduction of $ 240,044.00 in annual costs in the production of preforms

Characterization of TiAl alloys by secondary Ion mass spectrometry

Titanium aluminides are arising as a valuable alternative to superalloys in applications where the ratio resistance/density is important. Together with excellent mechanical and corrosion properties at high temperatures, such characteristics are very attractive for applications in the aeronautical, aerospace and automotive industries. However, the current high selling price, due to high costs of production and raw materials and the need of very specific equipment, are limitative factors for further applications. With the end of the cold war, and the decrease of traditional markets of TiAl, the strategy to develop other applications, strongly depends on the decrease of production costs. An alternative to the present production routes might be the use of traditional casting techniques, by induction melting of the alloy in a ceramic crucible and pouring into ceramic moulds, made by the investment casting process. However, due to the high reactivity of Ti alloys, the use of traditional ceramic materials cannot be used, as they lead to oxide formation and oxygen pick up both from the crucible and the moulding materials. In this work, the relative oxygen concentration of Ti-48Al castings was measured by SIMS — Secondary Ion Mass Spectrometry. This technique provides a direct measurement of the isotopic composition with high sensitivity. The cylindrical samples were specially prepared to allow the analysis of the area close to the border. Oxygen profiles were acquired for samples obtained by with different mould materials. The comparison of such profiles with hardness profiles, give insight in the significance of the oxygen concentration in the properties of the alloy and in the choice of the most suitable materials for TiAl production(undefined

A unified power converter for solar PV and energy storage in dc microgrids

This paper deals with the development and experimental validation of a unified power converter for application in dc microgrids, contemplating the inclusion of solar photovoltaic (PV) panels and energy storage systems (ESS), namely batteries. Considering the limitations presented by the current structure of the power grid, mostly highlighted by the accentuated integration of emerging technologies (ESS, renewables, electric vehicles, and electrical appliances that natively operate in dc), it is extremely pertinent to adopt new topologies, architectures, and paradigms. In particular, decentralized power systems, unified topologies, and correspondent control algorithms are representative of a new trend towards a reduction in the number of power converters. Thus, the developed solution is designed to operaSAVE-15te at a nominal power of 3.6 kW, with a switching frequency of 100 kHz, and in four operation modes concerning power flow: (i) solar PV panels to batteries (PV2B); (ii) solar PV panels to dc grid (PV2G); (iii) batteries to dc grid (B2G); (iv) dc grid to batteries (G2B). Moreover, a dual active bridge converter guarantees galvanic isolation, while two back-end dc–dc converters are responsible for interfacing solar PV panels and batteries. The experimental validation of the proposed unified power converter proves its application value to self-consumption production units.This work has been supported by FCT—Fundação para a Ciência e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020. This work has been supported by the MEGASOLAR Project POCI-01-0247-FEDER-047220

A methodological approach to potential vegetation modeling using GIS techniques and phytosociological expert-knowledge: application to mainland Portugal

An attempt to obtain a consistent spatial model of natural potential vegetation (NPV) for the mainland Portuguese territory is reported. Spatial modeling procedures performed in a Geographic Information System (GIS) environment, aimed to operationalize phytosociological expert-knowledge about the putative distribution of potential zona1 forest communities dominam in the Portuguese continental territories. The paradigm for NPV assumed was that of RIVAS-MARTINE(1Z9 76) and RIVAS-MARTINEeZt al. (1999), which presupposes, for a given territory, a univocal correspondence between a uniform combination of bioclimatic stage and lithology' gi ven a biogeographical context, and a unique successional sequence leading to a single climax community (i. e. a vegetation series (VS)). Information issued from both literature and a team of phytosociologists possessing detailed knowledge about Portuguese vegetation, namely about forests and its seria1 vegetation, was acknowledged as a starting point for the construction of such a habitat-vegetation correspondence model. First, a bioclimatic map concerning the "Worldwide Bioclimatic Classification System" (WBCS) of RIVAS-MARTINE(1Z9 81 -2004), obtained by multivariate grostatistical interpolation issuing from the work of MESQUITA(2 005), was set. Severa1 partia1 matrices, one for each biogeographical Province, combined such habitat statements to VS. Initial incoherence due to vagueness of statements led to an important amount of both superimposition of VS and habitat gaps in the matrices. Further rearrangement of the table according to known field distribution of VS by experts allowed setting an approximate univocal correspondence VS-habitat. Finally, an intersection of bioclimatic, lithology and biogeographic maps yielded over a thousand habitat combinations to be associated each to a single VS through implementation of the matrices as a set of rules. Again, inconsistencies were solved likewise, but this time by direct observation of the map by experts. Keeping of phytosociological consistency and fidelity to information on actual vegetation field distribution was always mandatory during the proces

Global trends in ultraprocessed food and drink product sales and their association with adult body mass index trajectories

This study evaluated global trends in ultraprocessed food and drink (UPFD) volume sales/capita and associations with adult body mass index (BMI) trajectories. Total food/drink volume sales/capita from Euromonitor for 80 countries (2002‐2016) were matched to mean adult BMI from the NCD Risk Factor Collaboration (2002‐2014). Products were classified as UPFD/non‐UPFD according to the NOVA classification system. Mixed models for repeated measures were used to analyse associations between UPFD volume sales/capita and adult BMI trajectories, controlling for confounding factors. The increase in UPF volume sales was highest for South and Southeast Asia (67.3%) and North Africa and the Middle East (57.6%), while for UPD, the increase was highest for South and Southeast Asia (120.0%) and Africa (70.7%). In 2016, baked goods were the biggest contributor to UPF volume sales (13.1%‐44.5%), while carbonated drinks were the biggest contributor to UPD volume sales (40.2%‐86.0%). For every standard deviation increase (51 kg/capita, 2002) in UPD volume sales, mean BMI increased by 0.195 kg/m2 for men (P < .001) and 0.072 kg/m2 for women (P = .003). For every standard deviation (40 kg/capita, 2002) increase in UPF volume sales, mean BMI increased by 0.316 kg/m2 for men (P < .001), while the association was not significant for women. Increases in UPFD volume sales/capita were positively associated with population‐level BMI trajectories

Tlx3 exerts direct control in specifying excitatory over inhibitory neurons in the dorsal spinal cord

© 2021 Monteiro, Miranda, Samina, Dias, Raposo, Oliveira, Reguenga, Castro and Lima. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.The spinal cord dorsal horn is a major station for integration and relay of somatosensory information and comprises both excitatory and inhibitory neuronal populations. The homeobox gene Tlx3 acts as a selector gene to control the development of late-born excitatory (dILB) neurons by specifying glutamatergic transmitter fate in dorsal spinal cord. However, since Tlx3 direct transcriptional targets remain largely unknown, it remains to be uncovered how Tlx3 functions to promote excitatory cell fate. Here we combined a genomics approach based on chromatin immunoprecipitation followed by next generation sequencing (ChIP-seq) and expression profiling, with validation experiments in Tlx3 null embryos, to characterize the transcriptional program of Tlx3 in mouse embryonic dorsal spinal cord. We found most dILB neuron specific genes previously identified to be directly activated by Tlx3. Surprisingly, we found Tlx3 also directly represses many genes associated with the alternative inhibitory dILA neuronal fate. In both cases, direct targets include transcription factors and terminal differentiation genes, showing that Tlx3 directly controls cell identity at distinct levels. Our findings provide a molecular frame for the master regulatory role of Tlx3 in developing glutamatergic dILB neurons. In addition, they suggest a novel function for Tlx3 as direct repressor of GABAergic dILA identity, pointing to how generation of the two alternative cell fates being tightly coupled.This work is a result of the project Norte-01-0145-FEDER-000008 – Porto Neurosciences and Neurologic Disease Research Initiative at I3S, supported by Norte Portugal Regional Operational Program (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (FEDER). This work was also supported by FCT – Fundação para a Ciência e Tecnologia (Grants PTDC/SAU-OBD/099886/2008 to DL and PTDC/NEU-NMC/0315/2012 to DC) and Universidade do Porto/Banco Santander Totta (Projetos Pluridisciplinares to FM). We acknowledge the support of POCI-01-0145-FEDER-022122, granted to i3S Scientific Platform Advanced Light Microscopy, member of the national infrastructure PPBI-Portuguese Platform of BioImaging.info:eu-repo/semantics/publishedVersio

Abordagem aos números decimais e suas operações: a importância de uma “eficaz navegação” entre representações

Este artigo foca alguns aspectos e ideias de tarefas a serem exploradas com os alunos relativamente à multiplicação de números decimais, discutindo o conhecimento matemático para o ensino subjacente à preparação e à aplicação de tais tarefas. Discutem-se algumas representações dessa multiplicação e a importância de um rico e fundamentado conhecimento matemático para o ensino como promotor de um conhecimento matemático com significado, por parte dos alunos, por via de uma eficaz navegação entre representações. A escolha das representações pretende, aqui, tornar também evidente o motivo pelo qual, ao multiplicar dois números decimais, o número de casas decimais do produto é a soma dos factores. O texto tem por base um trabalho colaborativo desenvolvido ao longo dos últimos anos com professores do 1º ciclo do ensino básico (alunos com idade entre seis e nove anos), tendo como ponto de partida as discussões ocorridas ali, as reflexões subjacentes e as maiores dificuldades sentidas tanto pelos alunos, como pelos próprios professores. É de salientar que o facto de se abordarem conjuntamente representações dos números em decimais e fraccionários possibilita que os alunos se consciencializem de diferentes representações para um mesmo valor, o mesmo ocorrendo quando se utilizam diversas quantidades como unidades discretas, ou distintos tipos de unidades. Apenas se o professor for detentor de um sustentado conhecimento matemático para o ensino ele poderá recorrer a essas distintas representações de maneira construtiva e de modo a que tenham significado para os alunos