Physics research on the TCV tokamak facility: from conventional to alternative scenarios and beyond

The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device’s unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power ‘starvation’ reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in–out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added

Obesity does not modulate the glycometabolic benefit of insoluble cereal fibre in subjects with prediabetes—a stratified post hoc analysis of the Optimal Fibre Trial (OptiFiT).

Obesity does not modulate the glycometabolic benefit of insoluble cereal fibre in subjects with prediabetes-a stratified post hoc analysis of the Optimal Fibre Trial (OptiFiT). Background: OptiFiT demonstrated the beneficial effect of insoluble oat fibres on dysglycemia in prediabetes. Recent analyses of OptiFiT and other randomised controlled trials (RCTs) indicated that this effect might be specific for the subgroup of patients with impaired fasting glucose (IFG). As subjects with IFG are more often obese, there is a need to clarify if the effect modulation is actually driven by glycemic state or body mass index (BMI). Aim: We conducted a stratified post hoc analysis of OptiFiT based on the presence or absence of obesity. Methods: 180 Caucasian participants with impaired glucose tolerance (IGT) were randomised in a double-blinded fashion to either twice-a-day fibre or placebo supplementation for 2 years (n = 89 and 91, respectively). Once a year, they underwent fasting blood sampling, an oral glucose tolerance test (oGTT) and full anthropometry. At baseline, out of 136 subjects who completed the first year of intervention, 87 (62%) were classified as OBESE (BMI >30) and 49 subjects were NONOBESE. We performed a stratified per-protocol analysis of the primary glycemic and secondary metabolic effects attributable to dietary fibre supplementation after 1 year of intervention. Results: Neither the NONOBESE nor the OBESE subgroup showed significant differences between the respective fibre and placebo groups in metabolic, anthropometric or inflammatory outcomes. None of the four subgroups showed a significant improvement in either fasting glucose or glycated haemoglobin (HbA1c) after 1 year of intervention and only OBESE fibre subjects improved 2 h glucose. Within the NONOBESE stratum, there were no significant differences in the change of primary or secondary metabolic parameters between the fibre and placebo arms. We found a significant interaction effect for leukocyte count (time x supplement x obesity status). Within the OBESE stratum, leukocyte count and gamma-glutamyl transferase (GGT) levels decreased more in the fibre group compared with placebo (adjusted for change in body weight). Comparison of both fibre groups revealed that OBESE subjects had a significantly stronger benefit with respect to leukocyte count and fasting C-peptide levels than NONOBESE participants. Only the effect on leukocyte count survived correction for multiple comparisons. In contrast, under placebo conditions, NONOBESE subjects managed to decrease their body fat content significantly more than OBESE ones. Intention-to-treat (ITT) analysis resulted in similar outcomes. Conclusions: The state of obesity does not relevantly modulate the beneficial effect of cereal fibre on major glycometabolic parameters by fibre supplementation, but leukocyte levels may be affected. Hence, BMI is not a suitable parameter to stratify this cohort with respect to diabetes risk or responsiveness to cereal fibre, but obesity needs to be accounted for when assessing anti-inflammatory effects of fibre treatments. Targeted diabetes prevention should focus on the actual metabolic state rather than on mere obesity

Fasting glucose state determines metabolic response to supplementation with insoluble cereal fibre: A secondary analysis of the Optimal Fibre Trial (OptiFiT).

Background: High intake of cereal fibre is associated with reduced risk for type 2 diabetes and long-term complications. Within the first long-term randomized controlled trial specifically targeting cereal fibre, the Optimal Fibre Trial (OptiFiT), intake of insoluble oat fibre was shown to significantly reduce glycaemia. Previous studies suggested that this effect might be limited to subjects with impaired fasting glucose (IFG). Aim: We stratified the OptiFiT cohort for normal and impaired fasting glucose (NFG, IFG) and conducted a secondary analysis comparing the effects of fibre supplementation between these subgroups. Methods: 180 Caucasian participants with impaired glucose tolerance (IGT) were randomized to twice-a-day fibre or placebo supplementation for 2 years (n=89 and 91, respectively), while assuring double-blinded intervention. Fasting blood sampling, oral glucose tolerance test and full anthropometry were assessed annually. At baseline, out of 136 subjects completing the first year of intervention, 72 (54%) showed IFG and IGT, while 64 subjects had IGT only (labelled "NFG"). Based on these two groups, we performed a stratified per-protocol analysis of glycometabolic and secondary effects during the first year of intervention. Results: The NFG group did not show significant differences between fibre and placebo group concerning anthropometric, glycometabolic, or other biochemical parameters. Within the IFG stratum, 2-h glucose, HbA1c, and gamma-glutamyl transferase levels decreased more in the fibre group, with a significant supplement x IFG interaction effect for HbA1c. Compared to NFG subjects, IFG subjects had larger benefits from fibre supplementation with respect to fasting glucose levels. Results were robust against adjustment for weight change and sex. An ITT analysis did not reveal any differences from the per-protocol analysis. Conclusions: Although stratification resulted in relatively small subgroups, we were able to pinpoint our previous findings from the entire cohort to the IFG subgroup. Cereal fibre can beneficially affect glycemic metabolism, with most pronounced or even isolated effectiveness in subjects with impaired fasting glucose

Barley starch

This thesis examined barley amylopectin structure and looked for correlations between the structure and physical properties of starch. The structure of amylopectin and gelatinisation and retrogradation of starch were studied in 10 different barley cultivars/breeding lines with differing genetic background. Amylopectin is built up of thousands of chains of glucose monomers, organised into clusters. The detailed fine structure of amylopectin was studied by isolating clusters of amylopectin and their building blocks, which are the tightly branched units building up the clusters. Barley cultivars/breeding lines possessing the amo1 mutation had fewer long chains of DP≥38 in amylopectin and more large building blocks. The structure of building blocks was rather conserved between the different barley cultivars/breeding lines studied and was categorized into different size groups. These different building blocks were shown to be randomly distributed in the amylopectin molecule. The C-chains in amylopectin can be of any length and are a category of chains different from the B-chains. The backbone in amylopectin consists of a special type of B-chains which, when cleaved by α-amylase, become chains of a similar type to C-chains. Gelatinisation and retrogradation (recrystallisation of gelatinised starch) of barley starch was studied by differential scanning calorimetry. The amo1 mutation resulted in a broader gelatinisation temperature range and a higher enthalpy of retrogradation. Other structural features were also found to influence the physical properties of starch. Small clusters and denser structure of the building blocks resulted in higher gelatinisation temperature. Fast retrogradation was observed in barley which had amylopectin with shorter chains and many large building blocks consisting of many chains. Amylopectin structure was also studied in developing barley kernels. Three barley cultivars/breeding lines were grown in a phytotron and kernels were harvested at 9, 12 and 24 days after flowering. The results showed that amylopectin synthesized at later stages of development had a more tightly branched structure. Expression of the enzymes involved in starch biosynthesis is also known to change during endosperm development

Physics research on the TCV tokamak facility: From conventional to alternative scenarios and beyond

The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device's unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power 'starvation' reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in-out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added. © EURATOM 2019

Real-time-capable prediction of temperature and density profiles in a tokamak using RAPTOR and a first-principle-based transport model

The RAPTOR code is a control-oriented core plasma profile simulator with various applications in control design and verification, discharge optimization and real-time plasma simulation. To date, RAPTOR was capable of simulating the evolution of poloidal flux and electron temperature using empirical transport models, and required the user to input assumptions on the other profiles and plasma parameters. We present an extension of the code to simulate the temperature evolution of both ions and electrons, as well as the particle density transport. A proof-of-principle neural-network emulation of the quasilinear gyrokinetic QuaLiKiz transport model is coupled to RAPTOR for the calculation of first-principle-based heat and particle turbulent transport. These extended capabilities are demonstrated in a simulation of a JET discharge. The multi-channel simulation requires ∼0.2 s to simulate 1 second of a JET plasma, corresponding to ∼20 energy confinement times, while predicting experimental profiles within the limits of the transport model. The transport model requires no external inputs except for the boundary condition at the top of the H-mode pedestal. This marks the first time that simultaneous, accurate predictions of Te, Tiand nehave been obtained using a first-principle-based transport code that can run in faster-than-real-time for present-day tokamaks

Comparison of runaway electron generation parameters in small, medium-sized and large tokamaks - A survey of experiments in COMPASS, TCV, ASDEX-Upgrade and JET

This paper presents a survey of the experiments on runaway electrons (RE) carried out recently in frames of EUROFusion Consortium in different tokamaks: COMPASS, ASDEX-Upgrade, TCV and JET. Massive gas injection (MGI) has been used in different scenarios for RE generation in small and medium-sized tokamaks to elaborate the most efficient and reliable ones for future RE experiments. New data on RE generated at disruptions in COMPASS and ASDEX-Upgrade was collected and added to the JET database. Different accessible parameters of disruptions, such as current quench rate, conversion rate of plasma current into runaways, etc have been analysed for each tokamak and compared to JET data. It was shown, that tokamaks with larger geometrical sizes provide the wider limits for spatial and temporal variation of plasma parameters during disruptions, thus extending the parameter space for RE generation. The second part of experiments was dedicated to study of RE generation in stationary discharges in COMPASS, TCV and JET. Injection of Ne/Ar have been used to mock-up the JET MGI runaway suppression experiments. Secondary RE avalanching was identified and quantified for the first time in the TCV tokamak in RE generating discharges after massive Ne injection. Simulations of the primary RE generation and secondary avalanching dynamics in stationary discharges has demonstrated that RE current fraction created via avalanching could achieve up to 70-75% of the total plasma current in TCV. Relaxations which are reminiscent the phenomena associated to the kinetic instability driven by RE have been detected in RE discharges in TCV. Macroscopic parameters of RE dominating discharges in TCV before and after onset of the instability fit well to the empirical instability criterion, which was established in the early tokamaks and examined by results of recent numerical simulations

Runaway electron beam control

Post-disruption runaway electron (RE) beams in tokamaks with large current can cause deep melting of the vessel and are one of the major concerns for ITER operations. Consequently, a considerable effort is provided by the scientific community in order to test RE mitigation strategies. We present an overview of the results obtained at FTU and TCV controlling the current and position of RE beams to improve safety and repeatability of mitigation studies such as massive gas (MGI) and shattered pellet injections (SPI). We show that the proposed RE beam controller (REB-C) implemented at FTU and TCV is effective and that current reduction of the beam can be performed via the central solenoid reducing the energy of REs, providing an alternative/parallel mitigation strategy to MGI/SPI. Experimental results show that, meanwhile deuterium pellets injected on a fully formed RE beam are ablated but do not improve RE energy dissipation rate, heavy metals injected by a laser blow off system on low-density flat-top discharges with a high level of RE seeding seem to induce disruptions expelling REs. Instabilities during the RE beam plateau phase have shown to enhance losses of REs, expelled from the beam core. Then, with the aim of triggering instabilities to increase RE losses, an oscillating loop voltage has been tested on RE beam plateau phase at TCV revealing, for the first time, what seems to be a full conversion from runaway to ohmic current. We finally report progresses in the design of control strategies at JET in view of the incoming SPI mitigation experiments