New trends in fast liquid chromatography for food and environmental analysis

There is an increasing need for applications in food and environmental areas able to cope with a large number of analytes in very complex matrices. The new analytical procedures demand sensitivity, robustness and high resolution within an acceptable analysis time. The purpose of this review is to describe new trends based on fast liquid chromatography applied to the food and environmental analysis. It includes different column technologies, such as monolithic, sub-2 \u3bcm, porous shell, as well as different stationary phases such as reversed phase (C8 and C18), hydrophilic interaction liquid chromatography (HILIC) and fluorinated columns. Additionally, recent sample extraction and clean-up methodologies applied to reduce sample manipulation and total analysis time in food and environmental analysis - QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe), on line solid phase extraction coupled to ultrahigh pressure liquid chromatography (on line SPE-UHPLC), turbulent flow chromatography (TFC) and molecularly imprinted polymers (MIPs), were also addressed. The advantages and drawbacks of these methodologies applied to the fast and sensitive analyses of food and environmental samples are going to be discussed. \ua9 2011 Elsevier B.V

Evaluation of mycotoxins and their metabolites in human breast milk using liquid chromatography coupled to high resolution mass spectrometry

Humans can be exposed to mycotoxins through the food chain. Mycotoxins are mainly found as contaminants in food and could be subsequently excreted via biological fluids such as urine or human breast milk in native or metabolised form. Since breast milk is usually supposed as the only food for new-borns, the occurrence of mycotoxins in thirty-five human milk samples was evaluated by a newly developed method based on QuEChERS extraction and UHPLC-HRMS detection. The method described here allows the detection of target mycotoxins in order to determine the quality of this initial feeding. The method has been fully validated, with recoveries ranging from 64% to 93% and relative standard deviations (RSD, %) being lower than 20%. Using the method described, non-metabolised mycotoxins such as ZEA, NEO, NIV, ENA, ENA1, ENB, ENB1 and metabolites, such as ZEA metabolites, HT-2, DOM and T-2 triol were detected in human milk samples. Results obtained help to estimate the exposure of mothers and infants to mycotoxins. Moreover, to the best of our knowledge, this is the first work describing the simultaneous detection, quantification and screening of mycotoxins and their metabolites in human mature milk

Fast liquid chromatography-mass spectrometry methods in food and environmental analysis

There is a growing need for high-throughput separations in food and environmental research that are able to cope with the analysis of a large number of compounds in very complex matrices. Whereas the most common approach for solving many analytical problems has often been high-performance liquid chromatography (HPLC), the recent use of fast or ultra-fast chromatographic methods for environmental and food analysis has increased the overall sample throughput and laboratory efficiency without loss (and even with an improvement) in the resolution obtained by conventional HPLC systems. This book brings together researchers at the top of their field from across the world to discuss and analyze recent advances in fast liquid chromatography-mass spectrometry (LC-MS) methods in food and environmental analysis. First, the most novel approaches to achieve fast and ultra-fast methods as well as the use of alternative and complementary stationary phases are described. Then, recent advances in fast LC-MS methods are addressed, focusing on novel treatment procedures coupled with LC-MS, new ionization sources, high-resolution mass spectrometry, and the problematic confirmation and quantification aspects in mass spectrometry. Finally, relevant LC-MS applications in food and environmental analysis such as the analysis of pesticides, mycotoxins, food packaging contaminants, perfluorinated compounds and polyphenolic compounds are described. The scope of the book is intentionally broad and is aimed at worldwide analytical laboratories working in food and environmental applications as well as researchers in universities worldwide. \ua9 2015 Imperial College Press. All rights reserved

State-of-the-art in fast liquid chromatography-mass spectrometry for bio-analytical applications

There is an increasing need of new bio-analytical methodologies with enough sensitivity, robustness and resolution to cope with the analysis of a large number of analytes in complex matrices in short analysis time. For this purpose, all steps included in any bio-analytical method (sampling, extraction, clean-up, chromatographic analysis and detection) must be taken into account to achieve good and reliable results with cost-effective methodologies. The purpose of this review is to describe the state-of-the-art of the most employed technologies in the period 2009–2012 to achieve fast analysis with liquid chromatography coupled to mass spectrometry (LC–MS) methodologies for bio-analytical applications. Current trends in fast liquid chromatography involve the use of several column technologies and this review will focus on the two most frequently applied: sub-2 μm particle size packed columns to achieve ultra high pressure liquid chromatography (UHPLC) separations and porous-shell particle packed columns to attain high efficiency separations with reduced column back-pressures. Additionally, recent automated sample extraction and clean-up methodologies to reduce sample manipulation, variability and total analysis time in bio-analytical applications such as on-line solid phase extraction coupled to HPLC or UHPLC methods, or the use of other approaches such as molecularly imprinted polymers, restricted access materials, and turbulent flow chromatography will also be addressed. The use of mass spectrometry and high or even ultra-high resolution mass spectrometry to reduce sample manipulation and to solve ion suppression or ion enhancement and matrix effects will also be presented. The advantages and drawbacks of all these methodologies for fast and sensitive analysis of biological samples are going to be discussed by means of relevant applications

Brazilian Flora 2020: Leveraging the power of a collaborative scientific network

International audienceThe shortage of reliable primary taxonomic data limits the description of biological taxa and the understanding of biodiversity patterns and processes, complicating biogeographical, ecological, and evolutionary studies. This deficit creates a significant taxonomic impediment to biodiversity research and conservation planning. The taxonomic impediment and the biodiversity crisis are widely recognized, highlighting the urgent need for reliable taxonomic data. Over the past decade, numerous countries worldwide have devoted considerable effort to Target 1 of the Global Strategy for Plant Conservation (GSPC), which called for the preparation of a working list of all known plant species by 2010 and an online world Flora by 2020. Brazil is a megadiverse country, home to more of the world's known plant species than any other country. Despite that, Flora Brasiliensis, concluded in 1906, was the last comprehensive treatment of the Brazilian flora. The lack of accurate estimates of the number of species of algae, fungi, and plants occurring in Brazil contributes to the prevailing taxonomic impediment and delays progress towards the GSPC targets. Over the past 12 years, a legion of taxonomists motivated to meet Target 1 of the GSPC, worked together to gather and integrate knowledge on the algal, plant, and fungal diversity of Brazil. Overall, a team of about 980 taxonomists joined efforts in a highly collaborative project that used cybertaxonomy to prepare an updated Flora of Brazil, showing the power of scientific collaboration to reach ambitious goals. This paper presents an overview of the Brazilian Flora 2020 and provides taxonomic and spatial updates on the algae, fungi, and plants found in one of the world's most biodiverse countries. We further identify collection gaps and summarize future goals that extend beyond 2020. Our results show that Brazil is home to 46,975 native species of algae, fungi, and plants, of which 19,669 are endemic to the country. The data compiled to date suggests that the Atlantic Rainforest might be the most diverse Brazilian domain for all plant groups except gymnosperms, which are most diverse in the Amazon. However, scientific knowledge of Brazilian diversity is still unequally distributed, with the Atlantic Rainforest and the Cerrado being the most intensively sampled and studied biomes in the country. In times of “scientific reductionism”, with botanical and mycological sciences suffering pervasive depreciation in recent decades, the first online Flora of Brazil 2020 significantly enhanced the quality and quantity of taxonomic data available for algae, fungi, and plants from Brazil. This project also made all the information freely available online, providing a firm foundation for future research and for the management, conservation, and sustainable use of the Brazilian funga and flora