Subchondral Bone Trabecular Integrity Predicts and Changes Concurrently with Radiographic and MRI Determined Knee Osteoarthritis Progression

OBJECTIVE: To evaluate subchondral bone trabecular integrity (BTI) on radiographs as a predictor of knee osteoarthritis (OA) progression. METHODS: Longitudinal (baseline, 12-month, and 24-month) knee radiographs were available for 60 female subjects with knee OA. OA progression was defined by 12- and 24-month changes in radiographic medial compartment minimal joint space width (JSW) and medial joint space area (JSA), and by medial tibial and femoral cartilage volume on magnetic resonance imaging. BTI of the medial tibial plateau was analyzed by fractal signature analysis using commercially available software. Receiver operating characteristic (ROC) curves for BTI were used to predict a 5% change in OA progression parameters. RESULTS: Individual terms (linear and quadratic) of baseline BTI of vertical trabeculae predicted knee OA progression based on 12- and 24-month changes in JSA (P < 0.01 for 24 months), 24-month change in tibial (P < 0.05), but not femoral, cartilage volume, and 24-month change in JSW (P = 0.05). ROC curves using both terms of baseline BTI predicted a 5% change in the following OA progression parameters over 24 months with high accuracy, as reflected by the area under the curve measures: JSW 81%, JSA 85%, tibial cartilage volume 75%, and femoral cartilage volume 85%. Change in BTI was also significantly associated (P < 0.05) with concurrent change in JSA over 12 and 24 months and with change in tibial cartilage volume over 24 months. CONCLUSION: BTI predicts structural OA progression as determined by radiographic and MRI outcomes. BTI may therefore be worthy of study as an outcome measure for OA studies and clinical trials. Copyright 2013 by the American College of Rheumatology

Evolution of intermetallics, dispersoids and elevated-temperature properties at various Fe contents in Al-Mn-Mg 3004 alloys

Nowadays, great interests are rising on aluminum alloys for the applications at elevated temperature, driven by the automotive and aerospace industries requiring high strength, light weight and low cost engineering materials. As one of the most promising candidates, Al-Mn-Mg 3004 alloys have been found to possess considerably high mechanical properties and creep resistance at elevated temperature resulted from the precipitation of a large number of thermally stable dispersoids during heat treatment. In present work, the effect of Fe contents on the evolution of microstructure as well as high temperature properties of 3004 alloys has been investigated. Results show that the dominant intermetallic changes from α-Al(MnFe)Si at 0.1 wt. % Fe to Al6(MnFe) at both 0.3 and 0.6 wt. % Fe. In the Fe range of 0.1 to 0.6 wt. % studied, a significant improvement on mechanical properties at elevated temperature has been observed due to the precipitation of dispersoids, and the best combination of yield strength and creep resistance at 573K (300°C) is obtained in the 0.3% Fe alloy with finest size and highest volume fraction of dispersoids. The superior properties obtained at 573K (300°C) makes 3004 alloys more promising for high temperature applications. The relationship between the Fe content and the dispersoid precipitation as well as the materials properties has been discussed

Reducing social anxiety in adolescents distressed by a visible difference: Results from a randomised control trial of a web-based intervention

A visible difference to the face or body may challenge adolescents’ adjustment and engagement in life activities, where some require psychosocial support. However, evidence is limited for whether existing interventions for this adolescent group reduce social or appearance-related distress. We therefore conducted a parallel-group, randomised control trial to evaluate the effectiveness of Young Person's Face IT, a self-guided web-based psychosocial intervention developed for adolescents with a visible difference who experience distress. Adolescents (N = 189, aged 11–18) from two countries (Norway and the Netherlands), were randomly allocated to an intervention group or care as usual (CAU). Outcomes were body esteem, social anxiety, perceived stigmatisation, and life disengagement. Compared with CAU, participants who completed Young Person's Face IT showed reductions in social anxiety symptoms (ηp2 = 0.06). No significant improvements were found for the other outcomes. This study endorses web-based psychosocial support in reducing social anxiety in adolescents distressed by a visible difference. Future studies are needed to confirm the effectiveness of Young Person's Face IT and to explore potential long-term effects

Measurement of the Lifetime of the Tau Lepton

The tau lepton lifetime is measured with the L3 detector at LEP using the complete data taken at centre-of-mass energies around the Z pole resulting in tau_tau = 293.2 +/- 2.0 (stat) +/- 1.5 (syst) fs. The comparison of this result with the muon lifetime supports lepton universality of the weak charged current at the level of six per mille. Assuming lepton universality, the value of the strong coupling constant, alpha_s is found to be alpha_s(m_tau^2) = 0.319 +/- 0.015(exp.) +/- 0.014 (theory)

Search for Neutral Higgs Bosons of the Minimal Supersymmetric Standard Model in e+e- Interactions at \sqrt{s} = 189 GeV

A search for the lightest neutral scalar and neutral pseudoscalar Higgs bosons in the Minimal Supersymmetric Standard Model is performed using 176.4 pb^-1 of integrated luminosity collected by L3 at a center-of-mass energy of 189 GeV. No signal is observed, and the data are consistent with the expected Standard Model background. Lower limits on the masses of the lightest neutral scalar and pseudoscalar Higgs bosons are given as a function of tan(beta). Lower mass limits for tan(beta)>1 are set at the 95% confidence level to be m_h > 77.1 GeV and m_A > 77.1 GeV

Measurement of the W+W-gamma Cross Section and Direct Limits on Anomalous Quartic Gauge Boson Couplings at LEP

The process e+e- -> W+W-gamma is analysed using the data collected with the L3 detector at LEP at a centre-of-mass energy of 188.6GeV, corresponding to an integrated luminosity of 176.8pb^-1. Based on a sample of 42 selected W+W- candidates containing an isolated hard photon, the W+W-gamma cross section, defined within phase-space cuts, is measured to be: sigma_WWgamma = 290 +/- 80 +/- 16 fb, consistent with the Standard Model expectation. Including the process e+e- -> nu nu gamma gamma, limits are derived on anomalous contributions to the Standard Model quartic vertices W+W- gamma gamma and W+W-Z gamma at 95% CL: -0.043 GeV^-2 < a_0/Lambda^2 < 0.043 GeV^-2 0.08 GeV^-2 < a_c/Lambda^2 < 0.13 GeV^-2 0.41 GeV^-2 < a_n/Lambda^2 < 0.37 GeV^-2

Search for Extra Dimensions in Boson and Fermion Pair Production in e+e- Interactions at LEP

Extra spatial dimensions are proposed by recent theories that postulate the scale of gravity to be of the same order as the electroweak scale. A sizeable interaction between gravitons and Standard Model particles is then predicted. Effects of these new interactions in boson and fermion pair production are searched for in the data sample collected at centre-of-mass energies above the Z pole by the L3 detector at LEP. In addition, the direct production of a graviton associated with a Z boson is investigated. No statistically significant hints for the existence of these effects are found and lower limits in excess of 1 TeV are derived on the scale of this new theory of gravity

Measurement of the Probability of Gluon Splitting into Charmed Quarks in Hadronic Z Decays

We have measured the probability, n(g->cc~), of a gluon splitting into a charm-quark pair using 1.7 million hadronic Z decays collected by the L3 detector. Two independent methods have been applied to events with a three-jet topology. One method relies on tagging charmed hadrons by identifying a lepton in the lowest energy jet. The other method uses a neural network based on global event shape parameters. Combining both methods, we measure n(g->cc~)= [2.45 +/- 0.29 +/- 0.53]%

Production of Single W Bosons at \sqrt{s}=189 GeV and Measurement of WWgamma Gauge Couplings

Single W boson production in electron-positron collisions is studied with the L3 detector at LEP. The data sample collected at a centre-of-mass energy of \sqrt{s} = 188.7GeV corresponds to an integrated luminosity of 176.4pb^-1. Events with a single energetic lepton or two acoplanar hadronic jets are selected. Within phase-space cuts, the total cross-section is measured to be 0.53 +/- 0.12 +/- 0.03 pb, consistent with the Standard Model expectation. Including our single W boson results obtained at lower \sqrt{s}, the WWgamma gauge couplings kappa_gamma and lambda_gamma are determined to be kappa_gamma = 0.93 +/- 0.16 +/- 0.09 and lambda_gamma = -0.31 +0.68 -0.19 +/- 0.13

Measurement of Triple-Gauge-Boson Couplings of the W Boson at LEP

We report on measurements of the triple-gauge-boson couplings of the W boson in e+e- collisions with the L3 detector at LEP. W-pair, single-W and single-photon events are analysed in a data sample corresponding to a total luminosity of 76.7 pb^{-1} collected at centre-of-mass energies between 161 GeV and 183 GeV. CP-conserving as well as both C- and P-conserving triple-gauge-boson couplings are determined. The results, in good agreement with the Standard-Model expectations, confirm the existence of the self coupling among the electroweak gauge bosons and constrain its structure