Impact of TiO2 Surface Defects on the Mechanism of Acetaldehyde Decomposition under Irradiation of a Fluorescent Lamp

TiO2 was placed in heat-treatment at the temperature of 400–500 °C under flow of hydrogen gas in order to introduce some titania surface defects. It was observed that hole centers in TiO2 were created during its heat treatment up to 450 °C, whereas at 500 °C some Ti3+ electron surface defects appeared. The type of titania surface defects had a great impact on the mechanism of acetaldehyde decomposition under irradiation of artificial visible light. Formation of O•− defects improved both acetaldehyde decomposition and mineralization due to the increased oxidation of adsorbed acetaldehyde molecules by holes. Contrary to that, the presence of electron traps and oxygen vacancies in titania (Ti3+ centers) was detrimental for its photocatalytic properties towards acetaldehyde decomposition. It was proved that transformation of acetaldehyde on the TiO2 with Ti3+ defects proceeded through formation of butene complexes, similar as on rutile-type TiO2. Formed acetic acid, upon further oxidation of butene complexes, was strongly bound with the titania surface and showed high stability under photocatalytic process. Therefore, titania sample heat-treated with H2 at 500 °C showed much lower photocatalytic activity than that prepared at 450 °C. This study indicated the great impact of titania surface defects (hole traps) in the oxidation of acetaldehyde and opposed one in the case of defects in the form of Ti3+ and oxygen vacancies. Oxidation abilities of TiO2 seem to be important in the photocatalytic decomposition of volatile organic compounds (VOCs) such as acetaldehyde.This research was funded by the National Science Centre, Poland, grant nr 2020/39/B/ST8/01514

Reversible temperature regulation of electrical and thermal conductivity using liquid–solid phase transitions

Reversible temperature tuning of electrical and thermal conductivities of materials is of interest for many applications, including seasonal regulation of building temperature, thermal storage and sensors. Here we introduce a general strategy to achieve large contrasts in electrical and thermal conductivities using first-order phase transitions in percolated composite materials. Internal stress generated during a phase transition modulates the electrical and thermal contact resistances, leading to large contrasts in the electrical and thermal conductivities at the phase transition temperature. With graphite/hexadecane suspensions, the electrical conductivity changes 2 orders of magnitude and the thermal conductivity varies up to 3.2 times near 18 °C. The generality of the approach is also demonstrated in other materials such as graphite/water and carbon nanotube/hexadecane suspensions

Antibacterial activity of sucralfate versus aluminum chloride in simulated gastric fluid

Studies have previously demonstrated that sucralfate possesses intrinsic antibacterial activity. This study was designed to indirectly assess whether aluminum is the active antibacterial component of sucralfate and to further evaluate factors that may influence this agent's antibacterial activity. Utilizing an in vitro model, the antibacterial activity of sucralfate, an equivalent quantity of aluminum in the form of aluminum chloride, and a control were compared. In addition, the influences of bacterial species ( Enterobacter cloacae and Pseudomonas aeruginosa ), time (0–24 h) and environmental pH (3, 5, 7) on the agents' antibacterial activities were evaluated. Equivalent quantities of aluminum, as either sucralfate or aluminum chloride, were added to two of three flasks containing approximately 10 5 cfu/ml of bacteria in pH-adjusted simulated gastric fluid. The third flask served as a control. Samples were obtained over 24 h, diluted and subcultured onto agar plates. The experiments demonstrated that bacterial growth was influenced by pH, time and treatment (aluminum chloride or sucralfate). Regardless of pH or bacterial species, bacterial death occurred within 20 min following the addition of aluminum chloride. In contrast, bacterial death following the addition of sucralfate was more variable and appeared to be pH dependent. In conclusion, sucralfate and aluminum chloride both possess antibacterial activity, even at pH values that normally support bacterial growth in gastric fluid. Although differences in the antibacterial activity of the two agents may in part be related to drug-induced changes in pH, these differences also support data suggesting that aluminum release from sucralfate is incomplete and is dependent on pH.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47895/1/10096_2005_Article_BF02111825.pd

Photocatalytic activity of nanostructured anatase coatings obtained by cold gas spray

This article describes a photocatalytic nanostructured anatase coating deposited by cold gas spray (CGS)supported on titanium sub-oxide (TiO22x) coatings obtained by atmospheric plasma spray (APS) onto stainless steel cylinders. The photocatalytic coating was homogeneous and preserved the composition and nanostructure of the starting powder. The inner titanium sub-oxide coating favored the deposition of anatase particles in the solid state. Agglomerated nano-TiO2 particles fragmented when impacting onto the hard surface of the APS TiO22x bond coat. The rough surface provided by APS provided an ideal scenario for entrapping the nanostructured particles, which may be adhered onto the bond coat due to chemical bonding; a possible bonding mechanism is described. Photocatalytic experiments showed that CGS nano-TiO2 coating was active for photodegrading phenol and formic acid under aqueous conditions. The results were similar to the performance obtained by competitor technologies and materials such as dip-coating P25 photocatalysts. Disparity in the final performance of the photoactive materials may have been caused by differences in grain size and the crystalline composition of titanium dioxide

Modeling focal epileptic activity in the Wilson-Cowan model with depolarization block

Measurements of neuronal signals during human seizure activity and evoked epileptic activity in experimental models suggest that, in these pathological states, the individual nerve cells experience an activity driven depolarization block, i.e. they saturate. We examined the effect of such a saturation in the Wilson–Cowan formalism by adapting the nonlinear activation function; we substituted the commonly applied sigmoid for a Gaussian function. We discuss experimental recordings during a seizure that support this substitution. Next we perform a bifurcation analysis on the Wilson–Cowan model with a Gaussian activation function. The main effect is an additional stable equilibrium with high excitatory and low inhibitory activity. Analysis of coupled local networks then shows that such high activity can stay localized or spread. Specifically, in a spatial continuum we show a wavefront with inhibition leading followed by excitatory activity. We relate our model simulations to observations of spreading activity during seizures

Influence of operational parameters on photocatalytic amitrole degradation using nickel organic xerogel under UV irradiation

The objectives of this study were to analyze the influence of different operational variables and to determine the time course of total organic carbon (TOC) and medium toxicity during amitrole (AMT) photodegradation in the presence of Ni xerogel (X-Ni) as photocatalyst. A further study objective was to analyze the influence of the type of water on the photodegradation process. Results show that the degradation rate is directly proportional to the initial X-Ni concentration up to a maximum of 250 mg/L with a slight decrease thereafter, indicating progressive photon absorption saturation of the catalyst for a given incident radiation flow. At concentrations close to 250 mg/L X-Ni, the AMT photodegradation rate is not affected by further increases in X-Ni concentration. In addition, AMT photolysis is highly pH-dependent and is generally favored at pH values at which AMT is in its ionic form. The increase observed in AMT degradation rate under alkaline conditions can be attributed to the higher generation of radicals. The presence of chloride reduces the AMT degradation rate, because Cl− anions behave as h+ and radical scavengers. The degradation rate is also decreased by addition to the medium of organic matter, which acts as a filter. The behavior of TOC removal kinetics during AMT degradation in the presence of X-Ni is similar to that observed for AMT degradation kinetics. Finally, we highlight that photocatalysis is more effective in ultrapure water than in wastewater or tap water. In all systems, the optimal catalyst concentration is 250 mg/L. The medium toxicity increases with longer treatment time, indicating the formation of by-products that are smaller than AMT and can more readily penetrate the cell.Financial support provided by the Ministerio de Ciencia e Innovación (Spain) and FEDER (Projects CTQ-2011-29035-C02-01 and CTQ-2011-29035- C02-02), and by the University of Jaén (Project UJA 2015/06/01)

Detection, evaluation, and management of preoperative anaemia in the elective orthopaedic surgical patient: NATA guidelines

Previously undiagnosed anaemia is common in elective orthopaedic surgical patients and is associated with increased likelihood of blood transfusion and increased perioperative morbidity and mortality. A standardized approach for the detection, evaluation, and management of anaemia in this setting has been identified as an unmet medical need. A multidisciplinary panel of physicians was convened by the Network for Advancement of Transfusion Alternatives (NATA) with the aim of developing practice guidelines for the detection, evaluation, and management of preoperative anaemia in elective orthopaedic surgery. A systematic literature review and critical evaluation of the evidence was performed, and recommendations were formulated according to the method proposed by the Grades of Recommendation Assessment, Development and Evaluation (GRADE) Working Group. We recommend that elective orthopaedic surgical patients have a haemoglobin (Hb) level determination 28 days before the scheduled surgical procedure if possible (Grade 1C). We suggest that the patient's target Hb before elective surgery be within the normal range, according to the World Health Organization criteria (Grade 2C). We recommend further laboratory testing to evaluate anaemia for nutritional deficiencies, chronic renal insufficiency, and/or chronic inflammatory disease (Grade 1C). We recommend that nutritional deficiencies be treated (Grade 1C). We suggest that erythropoiesis-stimulating agents be used for anaemic patients in whom nutritional deficiencies have been ruled out, corrected, or both (Grade 2A). Anaemia should be viewed as a serious and treatable medical condition, rather than simply an abnormal laboratory value. Implementation of anaemia management in the elective orthopaedic surgery setting will improve patient outcomes

The efficacy and safety of prokinetic agents in critically ill patients receiving enteral nutrition: a systematic review and meta-analysis of randomized trials.

BACKGROUND: Intolerance to enteral nutrition is common in critically ill adults, and may result in significant morbidity including ileus, abdominal distension, vomiting and potential aspiration events. Prokinetic agents are prescribed to improve gastric emptying. However, the efficacy and safety of these agents in critically ill patients is not well-defined. Therefore, we conducted a systematic review and meta-analysis to determine the efficacy and safety of prokinetic agents in critically ill patients. METHODS: We searched MEDLINE, EMBASE, and Cochrane Library from inception up to January 2016. Eligible studies included randomized controlled trials (RCTs) of critically ill adults assigned to receive a prokinetic agent or placebo, and that reported relevant clinical outcomes. Two independent reviewers screened potentially eligible articles, selected eligible studies, and abstracted pertinent data. We calculated pooled relative risk (RR) for dichotomous outcomes and mean difference for continuous outcomes, with the corresponding 95 % confidence interval (CI). We assessed risk of bias using Cochrane risk of bias tool, and the quality of evidence using grading of recommendations assessment, development, and evaluation (GRADE) methodology. RESULTS: Thirteen RCTs (enrolling 1341 patients) met our inclusion criteria. Prokinetic agents significantly reduced feeding intolerance (RR 0.73, 95 % CI 0.55, 0.97; P = 0.03; moderate certainty), which translated to 17.3 % (95 % CI 5, 26.8 %) absolute reduction in feeding intolerance. Prokinetics also reduced the risk of developing high gastric residual volumes (RR 0.69; 95 % CI 0.52, 0.91; P = 0.009; moderate quality) and increased the success of post-pyloric feeding tube placement (RR 1.60, 95 % CI 1.17, 2.21; P = 0.004; moderate quality). There was no significant improvement in the risk of vomiting, diarrhea, intensive care unit (ICU) length of stay or mortality. Prokinetic agents also did not significantly increase the rate of diarrhea. CONCLUSION: There is moderate-quality evidence that prokinetic agents reduce feeding intolerance in critically ill patients compared to placebo or no intervention. However, the impact on other clinical outcomes such as pneumonia, mortality, and ICU length of stay is unclear