Hypersomnia in Whipple disease: case report.

Arq Neuropsiquiatr. 2006 Sep;64(3B):865-8. Hypersomnia in Whipple disease: case report. Maia LF, Marta M, Lopes V, Rocha N, Lopes C, Martins-da-Silva A, Monteiro L. SourceDepartment of Neurological Disordes and Senses, Hospital Geral de Santo António, Largo Prof. Abel Salazar, 4099-001 Porto, Portugal. Abstract Whipple disease (WD) is a rare systemic infection caused by Tropheryma whippelii. Neurological involvement has been recognised in 40% of patients, either as initial manifestations or during the course of the disease. We report on a 45 years-old man with WD with initial, persistent and irresistible episodes of daytime somnolence. The patient was HLA-DQB1*0602 positive (genetic marker for narcolepsy). WD diagnosis was suspected on clinical and MRI basis and confirmed by histological and immunohistochemical study of duodenal biopsy. Forty months later all clinical features improved, narcoleptic-like episodes disappeared and cerebral MRI and CSF normalised. Longitudinal neurophysiological studies revealed persistent sleep pattern abnormalities with sleep fragmentation, paucity of slow wave and of REM sleep. The disruption of the hypocretin circuitry in the hypothalamic - diencephalic region triggered by the infection was the probable cause of the hypersomnia and narcopleptic symptoms. WD should be added to the list of causes of secondary hypersomnia

Alström Syndrome: Four Case Reports

A Síndrome de Alström (SA, MIM# 203800) é uma doença hereditária, de transmissão autossómica recessiva, descrita pela primeira vez em 1959, por Alström. O gene ALMS1, causador da doença, foi identificado em 2002 e localiza-se no cromossoma 2p13. É uma doença genética rara, com o envolvimento de múltiplos órgãos e de evolução progressiva. As principais características fenotípicas incluem: retinopatia pigmentar, surdez neurosensorial, miocardiopatia dilatada, obesidade, hiperinsulinismo e resistência à insulina. Recentemente, foram publicados critérios de diagnóstico, classificados em major e minor, contribuindo para um diagnóstico precoce da doença. Descrevem-se quatro casos, realçando-se as diferentes formas de apresentação clínica, a importância de um seguimento multidisciplinar e a possibilidade de se tratar provavelmente de uma doença sub-diagnosticada

Apple and Pear Model for Optimal Production and Fruit Grade in a Changing Environment

Apple and pear crops are very important to the rural economy of Portugal. Despite significant improvements in productivity and quality, due to the introduction of new management techniques, model-based decision support may further increase the revenue of the growers. Available simulation models of orchard growth and production are scarce and are often highly empirical. This study presents a mechanistic model for the simulation of productivity and fruit grade of apple and pear orchards under potential and water-limited conditions. The effects of temperature extremes and rain on fruit set are addressed. The model was validated on apple and pear datasets derived from extensive experiments conducted in Central and Southern Portugal. Model performance is high and depicts the effect of crop load on productivity and fruit-size grade and the distribution of both crops. A simulation example shows the relationship between productivity and average fruit size for a hypothetical six-year-olc apple orchard. The model herewith presented is a tool that can be used to estimate optimal crop load for maximum revenue and productivity, fruit size distribution, water use, and other variables relevant for pome fruit productioninfo:eu-repo/semantics/publishedVersio

Novel coating containing molybdenum oxide nanoparticles to reduce Staphylococcus aureus contamination on inanimate surfaces

We previously synthetized molybdenum oxide (MoO3) nanoparticles (NP) and showed their antibacterial activity against a representative collection of the most relevant bacterial species responsible for hospital-acquired infections, including Staphylococcus aureus. The aim of the present study was to prepare and characterize a novel coating with these MoO3 NP, confirm its mechanical stability, and investigate its biocidal effect to reduce S. aureus contamination on inanimate surfaces. In addition, the novel MoO3 NP coating was compared to a silver (Ag) NP coating synthetized by the same procedure. The MoO3 and Ag NP coatings were characterized in terms of their chemical structure by FT-IR, surface morphology by scanning electron microscopy, and mechanical properties by tensile and adhesion tests. The antimicrobial activity of the coatings was tested by following the loss of viability of S. aureus after 6h, 24h, 48h, and 72h exposure. MoO3 and Ag coatings exhibited surfaces of comparable morphologies and both presented elastomeric properties (tensile strength of similar to 420 kPa, Youngs modulus of similar to 48 kPa, and maximum elongation of similar to 12%), and excellent (classification of 5B) adhesion to glass, steel and polystyrene surfaces. The two coatings exhibited a good antibacterial activity (R) against S. aureus over time (R-MoO3 = 0.20.81; R-Ag = 0.612.37), although the effect of the Ag NP coating was more pronounced, especially at 72h (R-MoO3 = 0.81 vs R-Ag = 2.37). Noteworthy, contrary to the Ag NP coating, the MoO3 NP coating was colourless and transparent, avoiding undesired unaesthetic effects. The synthetized coating with NP of MoO3, which has low toxicity to humans, capability of biodegradation, and rapid excretion, can be applied onto most standard materials and therefore is a promising tool to reduce S. aureus contamination on usual inanimate surfaces found in healthcare and community environments.info:eu-repo/semantics/publishedVersio

Correlations of mutations in katG, oxyR-ahpC and inhA genes and in vitro susceptibility in Mycobacterium tuberculosis clinical strains segregated by spoligotype families from tuberculosis prevalent countries in South America

Background Mutations associated with resistance to rifampin or streptomycin have been reported for W/Beijing and Latin American Mediterranean (LAM) strain families of Mycobacterium tuberculosis. A few studies with limited sample sizes have separately evaluated mutations in katG, ahpC and inhA genes that are associated with isoniazid (INH) resistance. Increasing prevalence of INH resistance, especially in high tuberculosis (TB) prevalent countries is worsening the burden of TB control programs, since similar transmission rates are noted for INH susceptible and resistant M. tuberculosis strains. Results We, therefore, conducted a comprehensive evaluation of INH resistant M. tuberculosis strains (n = 224) from three South American countries with high burden of drug resistant TB to characterize mutations in katG, ahpC and inhA gene loci and correlate with minimal inhibitory concentrations (MIC) levels and spoligotype strain family. Mutations in katG were observed in 181 (80.8%) of the isolates of which 178 (98.3%) was contributed by the katG S315T mutation. Additional mutations seen included oxyR-ahpC; inhA regulatory region and inhA structural gene. The S315T katG mutation was significantly more likely to be associated with MIC for INH ≥2 μg/mL. The S315T katG mutation was also more frequent in Haarlem family strains than LAM (n = 81) and T strain families. Conclusion Our data suggests that genetic screening for the S315T katG mutation may provide rapid information for anti-TB regimen selection, epidemiological monitoring of INH resistance and, possibly, to track transmission of INH resistant strains.Fil: Dalla Costa, Elis R. State Foundation for Production and Research in Health (FEPPS); Brasil.Fil: Ribeiro, Marta O. State Foundation for Production and Research in Health (FEPPS); Brasil.Fil: Silva, Márcia S. N. State Foundation for Production and Research in Health (FEPPS); Brasil.Fil: Arnold, Liane S. State Foundation for Production and Research in Health (FEPPS); Brasil.Fil: Rostirolla, Diana C. State Foundation for Production and Research in Health (FEPPS); Brasil.Fil: Cafrune, Patricia I. State Foundation for Production and Research in Health (FEPPS); Brasil.Fil: Espinoza, Roger C. Blufstein Clinic Laboratory; Perú.Fil: Palaci, Moises. Federal University of Espírito Santo; Brasil.Fil: Telles, Maria A. Adolfo Lutz Institute; Brasil.Fil: Ritacco, Viviana. ANLIS Dr.C.G.Malbrán. Instituto Nacional de Enfermedades Infecciosas. Servicio de Micobacterias; Argentina.Fil: Suffys, Philip N. Oswaldo Cruz Institute; Brasil.Fil: Lopes, Maria L. Evandro Chagas Institute; Brasil.Fil: Campelo, Creuza L. LACEN Ceará; BrasilFil: Miranda, Silvana S. Federal University of Minas Gerais; Brasil.Fil: Kremer, Kristin. National Institute for Public Healthand the Environment (RIVM). Mycobacteria Reference Unit (CIb-LIS); Países Bajos.Fil: Almeida da Silva, Pedro E. Federal Foundation of Rio Grande; Brasil.Fil: de Souza Fonseca, Leila. Federal University of Rio de Janeiro. Tuberculosis Academic Program; Brasil.Fil: Ho, John L. Cornell University; Estados Unidos.Fil: Kritski, Afrânio L. Federal University of Rio de Janeiro. Tuberculosis Academic Program; Brasil.Fil: Rossetti, María L. R. State Foundation for Production and Research in Health (FEPPS); Brasil

Aproveitamento da farinha do mesocarpo do babaçu (Orbignya martiana) para obtenção de etanol

O babaçu (Orbignya martiana) faz parte da família das palmeiras (Palmae) e é composto de epicarpo, mesocarpo, endocarpo e amêndoas; o mesocarpo representa 20% do fruto inteiro e é composto de até 60% de amido, que poderia ser utilizado na produção de etanol. Neste trabalho teve-se por objetivo desenvolver e aperfeiçoar o processo de produção de álcool a partir do mesocarpo do babaçu, bem como calcular os rendimentos do processo. Durante a fermentação, o mosto foi analisado quanto ao teor de açúcares residuais, pH, acidez e densidade relativa. As variáveis otimizadas foram pH e temperatura, por meio da análise da conversão do amido em glicose. As condições otimizadas para a α-amilase foram 100°C a pH 6, e para amiloglucosidase foram 60°C, pH 4. A hidrólise enzimática apresentou, nessas condições, um rendimento de 93%. O tempo de fermentação foi estipulado em 12h, conforme os parâmetros fermentativos analisados. A quantidade de álcool produzida, aproximadamente 3°GL, não foi afetada pela agitação. Essa concentração mostra que a fermentação apresentou um rendimento de 98%. Palavras-chave: Orbignya martiana. Babaçu. Amido. Fermentação Alcoólica. Etanol

Glycoprotein L sets the neutralization profile of murid herpesvirus 4

Antibodies readily neutralize acute, epidemic viruses, but are less effective against more indolent pathogens such as herpesviruses. Murid herpesvirus 4 (MuHV-4) provides an accessible model for tracking the fate of antibody-exposed gammaherpesvirus virions. Glycoprotein L (gL) plays a central role in MuHV-4 entry: it allows gH to bind heparan sulfate and regulates fusion-associated conformation changes in gH and gB. However, gL is non-essential: heparan sulfate binding can also occur via gp70, and the gB–gH complex alone seems to be sufficient for membrane fusion. Here, we investigated how gL affects the susceptibility of MuHV-4 to neutralization. Immune sera neutralized gL− virions more readily than gL+ virions, chiefly because heparan sulfate binding now depended on gp70 and was therefore easier to block. However, there were also post-binding effects. First, the downstream, gL-independent conformation of gH became a neutralization target; gL normally prevents this by holding gH in an antigenically distinct heterodimer until after endocytosis. Second, gL− virions were more vulnerable to gB-directed neutralization. This covered multiple epitopes and thus seemed to reflect a general opening up of the gH–gB entry complex, which gL again normally restricts to late endosomes. gL therefore limits MuHV-4 neutralization by providing redundancy in cell binding and by keeping key elements of the virion fusion machinery hidden until after endocytosis

Encapsulation of Nanostructures in a Dielectric Matrix Providing Optical Enhancement in Ultrathin Solar Cells

The incorporation of nanostructures in optoelectronic devices for enhancing their optical performance is widely studied. However, several problems related to the processing complexity and the low performance of the nanostructures have hindered such actions in real-life devices. Herein, a novel way of introducing gold nanoparticles in a solar cell structure is proposed in which the nanostructures are encapsulated with a dielectric layer, shielding them from high temperatures and harsh growth processing conditions of the remaining device. Through optical simulations, an enhancement of the effective optical path length of approximately four times the nominal thickness of the absorber layer is verified with the new architecture. Furthermore, the proposed concept in a Cu(In,Ga)Se2 solar cell device is demonstrated, where the short-circuit current density is increased by 17.4%. The novel structure presented in this work is achieved by combining a bottom-up chemical approach of depositing the nanostructures with a top-down photolithographic process, which allows for an electrical contact.This work was funded in part by the Fundação para a Ciência e a Tecnologia (FCT) under Grants IF/00133/2015, PD/BD/142780/2018 and SFRH/BD/ 146776/2019. The authors also want to acknowledge the European Union’s Horizon 2020 Research and Innovation Programme through the ARCIGS-M project under Grant 720887, the Special Research Fund (BOF) of Hasselt University, the FCT through the project NovaCell (PTDC/CTM-CTM/28075/ 2017), and InovSolarCells (PTDC/FISMAC/29696/2017) co-funded by FCT and the ERDF through COMPETE2020. The authors also want to acknowledge Sandra Maya for the production of images used in this work.info:eu-repo/semantics/publishedVersio

Phylogeographic analysis reveals multiple international transmission events have driven the global emergence of Escherichia coli O157:H7

This work was supported by: Scotland by Food Standards Scotland [Grant Number FS102029] and University of Aberdeen; New Zealand, Institute of Environmental Science and Research; Canada, the Public Health Agency of Canada; United States, United States Department of AgriculturePeer reviewedPostprin