From gravity cores to overpressure history: the importance of measured sediment physical properties in hydrogeological models

The development of overpressure in continental margins is typically evaluated with hydrogeological models. Such approaches are used to both identify fluid flow patterns and to evaluate the development of high pore pressures within layers with particular physical properties that may promote slope instability. In some instances, these models are defined with sediment properties based on facies characterization and proxy values of porosity, permeability or compressibility are derived from the existing literature as direct measurements are rarely available. This study uses finite-element models to quantify the differences in computed overpressure generated by fine-grained hemipelagic sediments from Gulf of Cadiz, offshore Martinique and Gulf of Mexico, and their consequences in terms of submarine slope stability. By comparing our simulation results with in-situ pore pressure data measured in the Gulf of Mexico, we demonstrated that physical properties measured on volcanic-influenced hemipelagic sediments underestimate the computed stability of a submarine slope. Physical properties measured on sediments from the study area are key to improving the reliability and accuracy of overpressure models, and when that information is not available literature data from samples with similar lithologies, composition and depositional settings enable better assessment of the overpressure role as a pre-conditioning factor in submarine landslide initiation

The relationship between eruptive activity, flank collapse, and sea level at volcanic islands: A long-term (>1 Ma) record offshore Montserrat, Lesser Antilles

Hole U1395B, drilled southeast of Montserrat during Integrated Ocean Drilling Program Expedition 340, provides a long (>1 Ma) and detailed record of eruptive and mass-wasting events (>130 discrete events). This record can be used to explore the temporal evolution in volcanic activity and landslides at an arc volcano. Analysis of tephra fall and volcaniclastic turbidite deposits in the drill cores reveals three heightened periods of volcanic activity on the island of Montserrat (?930 ka to ?900 ka, ?810 ka to ?760 ka, and ?190 ka to ?120 ka) that coincide with periods of increased volcano instability and mass-wasting. The youngest of these periods marks the peak in activity at the Soufrière Hills volcano. The largest flank collapse of this volcano (?130 ka) occurred towards the end of this period, and two younger landslides also occurred during a period of relatively elevated volcanism. These three landslides represent the only large (>0.3 km3) flank collapses of the Soufrière Hills edifice, and their timing also coincides with periods of rapid sea-level rise (>5 m/ka). Available age data from other island arc volcanoes suggests a general correlation between the timing of large landslides and periods of rapid sea-level rise, but this is not observed for volcanoes in intra-plate ocean settings. We thus infer that rapid sea-level rise may modulate the timing of collapse at island arc volcanoes, but not in larger ocean-island settings

A volcaniclastic deep-sea fan off La Réunion Island (Indian Ocean): Gradualism versus catastrophism

International audienceA new geophysical data set off La Réunion Island (western Indian Ocean) reveals a large volcaniclastic submarine fan developing in an open-ocean setting. The fan is connected to a torrential river that floods during tropical cyclones. Sediment storage at the coast is limited, suggesting that the sediments are carried directly to the basin. The fan morphology and turbidites in cores lead us to classify it as a sand-rich system mainly fed by hyperpycnal flows. In the ancient geological record, there are many examples of thick volcaniclastic successions, but studies of modern analogues have emphasized mechanisms such as debris avalanches or direct pyroclastic flow into the sea. Because the Cilaos deep-sea fan is isolated from any continental source, it provides information on architecture and noncatastrophic processes in a volcaniclastic deep-sea fan

Dome growth, collapse, and valley fill at Soufrière Hills Volcano, Montserrat, from 1995 to 2013: Contributions from satellite radar measurements of topographic change

Frequent high-resolution measurements of topography at active volcanoes can provide important information for assessing the distribution and rate of emplacement of volcanic deposits and their influence on hazard. At dome-building volcanoes, monitoring techniques such as LiDAR and photogrammetry often provide a limited view of the area affected by the eruption. Here, we show the ability of satellite radar observations to image the lava dome and pyroclastic density current deposits that resulted from 15 years of eruptive activity at Soufrière Hills Volcano, Montserrat, from 1995 to 2010. We present the first geodetic measurements of the complete subaerial deposition field on Montserrat, including the lava dome. Synthetic aperture radar observations from the Advanced Land Observation Satellite (ALOS) and TanDEM-X mission are used to map the distribution and magnitude of elevation changes. We estimate a net dense-rock equivalent volume increase of 108 ± 15M m3 of the lava dome and 300 ± 220M m3 of talus and subaerial pyroclastic density current deposits. We also show variations in deposit distribution during different phases of the eruption, with greatest on-land deposition to the south and west, from 1995 to 2005, and the thickest deposits to the west and north after 2005. We conclude by assessing the potential of using radar-derived topographic measurements as a tool for monitoring and hazard assessment during eruptions at dome-building volcanoes

Composition, geometry, and emplacement dynamics of a large volcanic island landslide offshore Martinique: From volcano flank-collapse to seafloor sediment failure

Landslides are common features in the vicinity of volcanic islands. In this contribution, we investigate landslides emplacement and dynamics around the volcanic island of Martinique based on the first scientific drilling of such deposits. The evolution of the active Montagne Pelée volcano on this island has been marked by three major flank-collapses that removed much of the western flank of the volcano. Subaerial collapse volumes vary from 2 to 25 km3 and debris avalanches flowed into the Grenada Basin. High-resolution seismic data (AGUADOMAR – 1999, CARAVAL – 2002 and GWADASEIS – 2009) is combined with new drill cores that penetrate up to 430 m through the three submarine landslide deposits previously associated to the aerial flank-collapses (Site U1399, Site U1400, Site U1401, IODP Expedition 340, Joides Resolution, March-April 2012). This combined geophysical and core data provide an improved understanding of landslide processes offshore a volcanic island. The integrated analysis shows a large submarine landslide deposit, without debris avalanche deposits coming from the volcano, comprising up to 300 km3 of remobilized seafloor sediment that extends for 70 km away from the coast and covers an area of 2100 km2. Our new data suggest that the aerial debris avalanche deposit enter the sea but stop at the base of submarine flank. We propose a new model dealing with seafloor sediment failures and landslide propagation mechanisms, triggered by volcanic flank-collapse events affecting Montagne Pelée volcano. Newly recognized landslide deposits occur deeper in the stratigraphy, suggesting the recurrence of large-scale mass-wasting processes offshore the island and thus, the necessity to better assess the associated tsunami hazards in the region. This article is protected by copyright. All rights reserved

Gravity-driven sliding and associated deformations along complex submarine slopes: a laboratory modeling approach based on constraints observed offshore Martinique Island (Lesser Antilles)

Submarine gravity-driven sliding of sediments are common processes in the vicinity of volcanic islands. In the Lesser Antilles arc, the Montagne Pelée volcano on Martinique Island underwent several flank-collapse events during its long-term eruptive history, resulting in debris avalanches. When the debris avalanches entered into the seawater, they were emplaced over the unstable slope of the volcano, triggering a seafloor sediment failure and massive landslides downslope. Using a laboratory modeling approach, we simulated the gravity-driven sliding of a sand layer lying above a silicone layer. The experiments were performed using various slope geometries (slope lengths and number of slope breaks separating the slopes with different angles), under both dry and aqueous conditions, and while varying the amount of additional sand inputs upslope. The resulting deformations were characterized in each experiment in order to compare the obtained structures with those shown by the seismic lines offshore to the west of Martinique Island. During all the experiments, a compressional frontal deformation zone made of several reverse faults formed downslope, often near the slope breaks. Downslope, a portion of the sediments was mostly displaced and poorly deformed in a damping zone, while an extensional deformation zone formed upslope. The displacements of the surficial markers were measured through time to characterize the sliding dynamics. Our study demonstrates that the slope geometry and additional sand inputs primarily favor and increase the sliding deformation, whereas the hydrostatic pressure plays a secondary catalytic role over time. These results provide new constraints on the driving factors and their consequences on gravity-driven sliding in terms of deformations and runout distance over time. This may have a significant impact on the associated hazard assessment related to offshore infrastructures, in a region known for its seismic and volcanic risks

Rapid onset of mafic magmatism facilitated by volcanic edifice collapse

Volcanic edifice collapses generate some of Earth's largest landslides. How such unloading affects the magma storage systems is important for both hazard assessment and for determining long-term controls on volcano growth and decay. Here we present a detailed stratigraphic and petrological analyses of volcanic landslide and eruption deposits offshore Montserrat, in a subduction zone setting, sampled during Integrated Ocean Drilling Program Expedition 340. A large (6–10 km3) collapse of the Soufrière Hills Volcano at ~130 ka was followed by explosive basaltic volcanism and the formation of a new basaltic volcanic center, the South Soufrière Hills, estimated to have initiated <100 years after collapse. This basaltic volcanism was a sharp departure from the andesitic volcanism that characterized Soufrière Hills' activity before the collapse. Mineral-melt thermobarometry demonstrates that the basaltic magma's transit through the crust was rapid and from midcrustal depths. We suggest that this rapid ascent was promoted by unloading following collapse

Growth and mass wasting of volcanic centers in the northern South Sandwich arc, South Atlantic, revealed by new multibeam mapping

New multibeam (swath) bathymetric sonar data acquired using an EM120 system on the RRS James Clark Ross, supplemented by sub-bottom profiling, reveals the underwater morphology of a not, vert, similar 12,000 km2 area in the northern part of the mainly submarine South Sandwich volcanic arc. The new data extend between 55° 45′S and 57° 20′S and include Protector Shoal and the areas around Zavodovski, Visokoi and the Candlemas islands groups. Each of these areas is a discrete volcanic center. The entirely submarine Protector Shoal area, close to the northern limit of the arc, forms a 55 km long east–west-trending seamount chain that is at least partly of silicic composition. The seamounts are comparable to small subaerial stratovolcanoes in size, with volumes up to 83 km3, indicating that they are the product of multiple eruptions over extended periods. Zavodovski, Visokoi and the Candlemas island group are the summits of three 3–3.5 km high volcanic edifices. The bathymetric data show evidence for relationships between constructional volcanic features, including migrating volcanic centers, structurally controlled constructional ridges, satellite lava flows and domes, and mass wasting of the edifices. Mass wasting takes place mainly by strong erosion at sea level, and dispersal of this material along chutes, probably as turbidity currents and other mass flows that deposit in extensive sediment wave fields. Large scale mass wasting structures include movement of unconsolidated debris in slides, slumps and debris avalanches. Volcanism is migrating westward relative to the underlying plate and major volcanoes are asymmetrical, being steep with abundant recent volcanism on their western flanks, and gently sloping with extinct, eroded volcanic sequences to their east. This is consistent with the calculated rate of subduction erosion of the fore-arc

Noeud A VOLCANO de RESIF : bilan et perspectives

Knot A VOLCANO is part of the RESIF research infrastructure information system and concentrates seismic data from the three volcanological and seismological observatories of the Institut de Physique du Globe de Paris. These observatories operate short-seismological stations-analogical period, short-digital three-component period, medium-digital band and digital wideband. These data are used for monitoring regional volcanic and land-based activity, as well as tsunami warning. The poster presents the results at the end of 2017 and the prospects for this knot A.The French Seismological and Geodetic Network RESIF is a national research infrastructure dedicated to the observation and understanding of the structure and dynamics of the Internal Earth. RESIF is based on high-tech observation networks, composed of seismological, geodetic and gravimetric instruments deployed in a dense manner throughout France. The data collected make it possible to study with high spatial and temporal resolution the deformation of the ground, surface and deep structures, seismicity on a local and global scale and natural hazards, and more particularly seismic events, on French territory. RESIF is integrated into European (EPOS - European Plate Observing System) and global systems of instruments for imaging the Earth's interior as a whole and studying many natural phenomena.Le nœud A VOLCANO fait partie du système d'information de l'infrastructure de recherche RESIF et concentre les données sismiques des trois observatoires volcanologiques et sismologiques de l'Institut de Physique du Globe de Paris. Ces observatoires opèrent des stations sismologiques courte-période analogique, courte-période numérique trois composantes, moyenne- bande numérique et large-bande numérique. Ces données sont utilisées pour le suivi de l’activité volcanique et tellurique régionale, ainsi que l’alerte aux tsunamis. Le poster présente le bilan fin 2017 et les perspectives pour ce noeud A.Le Réseau sismologique et géodésique français RESIF est une infrastructure de recherche nationale dédiée à l’observation et la compréhension de la structure et de la dynamique Terre interne. RESIF se base sur des réseaux d’observation de haut niveau technologique, composés d’instruments sismologiques, géodésiques et gravimétriques déployés de manière dense sur tout le territoire français. Les données recueillies permettent d’étudier avec une haute résolution spatio-temporelle la déformation du sol, les structures superficielles et profondes, la sismicité à l’échelle locale et globale et les aléas naturels, et plus particulièrement sismiques, sur le territoire français. RESIF s’intègre aux dispositifs européens (EPOS - European Plate Observing System) et mondiaux d’instruments permettant d’imager l’intérieur de la Terre dans sa globalité et d’étudier de nombreux phénomènes naturels