90 research outputs found
Contribution of the RSCM Geothermometry to Detect the Thermal Anomalies and Peak Temperatures Induced by Fluid Circulation in Metasediments
International audienceThe occurrence of deposits hosted by carbonaceous materials-rich metasediments is widespread. For this reason, we propose in this study to investigate the potential of the Raman Spectroscopy of Carbonaceous Material (RSCM) geothermometry to detect thermal anomalies in hydrothermal ore deposits environment. The chosen geological context is the Lucia subterrane in the Franciscan Complex (California, USA), which includes gold-bearing quartz veins (Underwood et al., 1995). Estimated Raman temperatures 1) confirmed the increase in the metamorphic grade towards the north already shown by Underwood et al. (1995), using classical methods like mineralogy and vitrinite reflectance and 2) exhibit anomalous values. These anomalies are probably due to the later hydrothermal event. This result suggests that RSCM could be used as a reliable tool to determine thermal anomalies caused by hot fluid-flow
Raman Spectroscopy of Carbonaceous Materials geothermometry: a reliable method to investigate thermal history of foreland basins.
To investigate the thermal evolu-tion of foreland basins, many classical methods includ-ing clay mineralogy, vitrinite reflectance, fluid inclu-sions and illite cristalinity are used. These methods are probably not perfectly reliable taken individually, but provides a robust estimate when they give a coherent results. Raman Spectroscopy of Carbonaceous Materials (RSCM) could be an alternative method to constrain paleotempeartures of rocks. This method has been calibrated firstly in the range 330-640°C [1] then in the range 200-350° [2]. The aim of this study is to extend the applicability of this method towards palotemperatures lower than 200°C. For this purpose, we discuss a new fitting pro-cedure which would allow us to define a new Raman parameter R3. This parameter is different of RA1 [1] and R2 [2] used previously to characterize the thermal evolution of the Carbonaceous Materials. Raman spectra measured and treated are obtained by analysing samples from turbiditic deposits of differ-ent basins located in the western part of the South Pyrenean Zone. The thermal history of these samples, that underwent diagenesis, is well known using a vari-ous techniques. These methods are vitrinite reflec-tance, fluid inclusion thermometry, low-T thermochro-nology, index mineralogy and illite cristallinity. Although our results are preliminary, they suggest that the RSCM geothermometer could be a reliable method to constrain the thermal history of foreland basins. We are currently working on the acquisition of more data to determine temperatures of the basin that underwent diagenesis conditions during the Pyrenean activity. Referenc
Evaluation du degré de maturité de la matière organique par spectroscopie Raman: extension du géothermomètre RSCM vers la gamme 100-200°C.
National audienceLa connaissance de températures de formation des roches est un paramètre important pour la reconstitution et la modélisation de l'histoire de domaines et de processus géologiques. Parmi les nombreuses possibilités d'estimation des températures, le géothermomètre RSCM (Raman Spectroscopy of Carbonaceous Materials) apporte un critère relativement précis pour reconstituer l'évolution thermique d'un domaine géologique (histoire température-temps) à partir de l'étude des composés carbonés ubiquistes (e.g. Beyssac et al., 2002, Aoya et al., 2010, Lahfid et al., 2010). Cet outil fournit ainsi des contraintes pertinentes sur l'histoire thermique des formations géologiques. Cependant, il n'a été calibré que pour la gamme 200-640°C avec une précision absolue de +/- 50°C et une reproductibilité interne bien meilleure de l'ordre de 10-15°C. La présente étude vise à étendre l'applicabilité du géothermomètre RSCM vers des températures plus basses que celles investiguées précédemment. Il s'agit de la gamme 100-200°C. Une série d'échantillons a été sélectionné. Parmi les zones d'échantillonnage figurent des bassins de la chaîne pyrénéenne. Les pics de températures de ces échantillons ont été estimés par des méthodes conventionnelles parmi lesquelles figurent le pouvoir réflecteur de la vitrinite, les inclusions fluides et la cristallinité de l'illite. Un nouveau protocole de mesure, par microspectroscopie Raman, pour caractériser la structure des matériaux carbonés très désordonnés a été établi. Lors de l'analyse, plusieurs paramètres ont été ajustés tels que la puissance du laser, le nombre d'analyses par échantillon, le temps d'acquisition... Une série de spectres de référence ont été alors acquis. Ces spectres ont permis de réaliser dans un premier temps une calibration qualitative de la méthode RSCM pour la gamme 100-200°C. Afin de proposer une calibration quantitative, nous sommes entrain de définir une procédure fiable d'ajustement des spectres Raman afin de déterminer des paramètres Raman pertinents pour la quantification thermique des matériaux carbonés très désordonnés dont les pics thermiques correspondent à la gamme 100-200°C. Cette calibration pourra être appliquée pour reconstituer l'histoire thermique des bassins de marge passive profonde (cible actuelle pour l'industrie pétrolière)
New sedimentological, structural and paleo-thermicity data in the Boucheville Basin (eastern North Pyrenean Zone, France)
International audienceThe Boucheville Basin is one of the easternmost Mesozoic basins of the North Pyrenean Zone (NPZ) that was opened during the Albian extension between the Iberian and European plates. During the extension, a HT/LP metamorphism event affected the Albian basins near the North Pyrenean Fault (NPF). Our aim is to better understand the evolution of the Boucheville Basin during the Albian–Cenomanian lithospheric thinning, which occurred under high thermal conditions. Sedimentological and structural data were collected in the basin and are used to produce synthetic stratigraphic columns of different portions of the basin and to restore selected cross-sections. North–south cross-sections show that the Boucheville Basin is a large and asymmetrical deformed syncline with inverted borders. Synthetic stratigraphic columns show that the sedimentation of the Boucheville Basin starts with carbonate platforms deposited under low bathymetric conditions showing slope deposits and evolves to deep bathymetric conditions of marls deposited without evidence of slopes. Raman spectroscopy on carbonaceous material (RSCM) was made on samples used to construct the sedimentological stratigraphic columns in order to obtain a temperature map of the Albian metamorphism. They reveal homogeneity in the temperatures between 500 and 600 °C. In situ LA–ICP–MS U–Pb dating of titanite grains found in a syn-deformation located in the Albian calcschists provided an age of ca. 97 Ma that gives a time constraint for both the deformation and metamorphism. These data are used collectively to propose a model for the tectono-sedimentary and metamorphic evolution of the Boucheville Basin during the Albian extension
The Ikaria high-temperature Metamorphic Core Complex (Cyclades, Greece): Geometry, kinematics and thermal structure
International audienceThis work attempted at clarifying the structure of Ikaria using primarily intensive geological mapping combined with structural analysis and a geothermometry approach of Raman spectrometry of carbonaceous material. Foliation over the whole island defines a structural dome cored by high-grade to partially-molten rocks. Its exhumation was completed by two top-to-the-N ductile extensional shear zones, operating in the ductile and then the brittle fields, through a single extensional event coeval with progressive strain localization. The thermal structure of the dome with regard to position of ductile shear zones was retrieved using the Raman spectroscopy of carbonaceous material. Peak-metamorphic temperatures range from 390 °C in the upper parts of the structure down to 625 °C in the core of the dome in the vicinity of migmatites and S-type granite. Pioneer in situ U-Th-Pb analyses on monazite performed on the leucosome parts of these rock yielded a 15.7 ± 0.2 Ma age. Ikaria Island thus completes the series of Miocene migmatite-cored Metamorphic Core Complex in the central part of the Aegean domain where a genuine high-temperature zone can be defined as the central Aegean HT zone. There, the extreme stretching of the continental crust is associated with dominantly top-to-the-N kinematics
Thermal evolution of the syn-tectonic Ainsa-Jaca basin (South Pyrenean Zone). New constraints from a multiproxy approach.
International audienceConstraining the Thermal history of tectonically active basins is of special importance for the petroleum industry. Indeed, the estimation of geothermal gradients and their evolution are basic parameters to understand the tectono-sedimentary evolution of fold-and-thrust belts and associated foreland basins. In this work, we focus on the turbiditic deposits of the Ainsa-Jaca basin (western part of the South Pyrenean Zone) which consist of an accreted foreland basin composed of Eocene syn-tectonic sediments. The aim is to quantify peak temperatures of the basin that underwent late diagenesis and low-grade metamorphism conditions during the Pyrenean activity. For this, turbiditic rocks and calcite veins (extensional and shear veins) were systematically sampled along a section over a thickness of 4 km through the Monte Perdido unit. In order to constrain the structures observed, sampling was accompanied with a detailed structural analysis. We have combined three thermometric indicators to evaluate peak temperature of rocks: Raman thermometry on carbonaceous material, fluid inclusion microthermometry on calcite/quartz shear and extensional veins and compositional chlorite thermometry on Fe-chlorite observed in shear veins. The Raman temperatures obtained show variations ranging from <160°C to 270°C. As the quantitative Raman thermometry calibration is limited to 200°C, the peak temperatures belonging at 140-180°C range have been determined comparing Pyrenean Raman spectra to those of Glarus area. Indeed, Raman thermometry method has been calibrated recently using samples collected from Glarus Alps. To check the reliability of the Pyrenean Raman data, we confront Raman temperature to available temperatures estimated in this study using compositional chlorite thermometry and fluid inclusion methods. Temperatures determined by the three different methods converge. This result tends to confirm the efficiency of Raman thermometry in determining the maximum burial temperature of basin infill, taking into account that chlorite thermometry has been tested successfully in samples from the Monte Perdido thrust fault. Although our results are preliminary, they suggest that the various published peak temperatures of the Ainsa-Jaca basin do not seem so obvious and need to be carefully used. In order to better constrain the thermal history of South Pyrenean Zone, we are currently working on the acquisition of more data
Thermal imprint of rift-related processes in orogens as recorded in the Pyrenees
International audience19 The extent to which heat recorded in orogens reflects thermal conditions inherited from 20 previous rift-related processes is still debated and poorly documented. As a case study, we 21 examine the Mauléon basin in the north-western Pyrenees that experienced both extreme 22 crustal thinning and tectonic inversion within a period of ~30 Myrs. To constrain the time-23 temperature history of the basin in such a scenario, we provide new detrital zircon fission-24 track and (U-Th-Sm)/He thermochronology data. The role of rift-related processes in 25 subsequent collision is captured by inverse modeling of our thermochronological data, using 26 relationships between zircon (U-Th-Sm)/He ages and uranium content, combined with 27 thermo-kinematic models of a rift-orogen cycle. We show that the basin recorded significant 28 heating at about 100 Ma characterized by high geothermal gradients (~80°C/km). Our 29 thermo-kinematic modeling and geological constraints support the view that subcontinental 30 lithospheric mantle was exhumed at that time below the Mauléon basin. Such a high 31 geothermal gradient lasted 30 Myr after onset of convergence at ~83 Ma and was relaxed 32 during the collision phase from ~50 Ma. This study suggests that heat needed for ductile 33 shortening during convergence, is primarily inherited from extension rather than being only 34 related to tectonic and/or sedimentary burial. This should have strong implications on tectonic 35 reconstructions in many collision belts that resulted from inversion of hyper-extended rift 36 basins
Geometry, thermal structure and kinematics of the metamorphic dome of Ikaria (eastern Cyclades, Greece): implication for Aegean tectonics
International audienceThe Aegean domain has been characterized since the Oligocene by extensional tectonics caused by the southward retreat of the African slab subducting beneath Eurasia. Structures and associated kinematics relative to this extensional tectonics are well constrained in the western Cyclades and the Menderes massif of western Turkey. Major extensional detachments such as the North Cycladic Detachment System (NCDS) or the Simav Detachment have accommodated the exhumation of a series of metamorphic core complexes (MCC) from Andros-Tinos-Mykonos in the west to the northern Menderes massif in the east. However, the transition between the NCDS and the Simav Detachment is currently not understood. This transition is located above a large-scale tear in the Aegean slab and its effects on the kinematics of deformation and P-T-t evolution of the overlying thinned crust are not known. The geology of Ikaria Island, located in this region, remains poorly known and the few existing studies are strikingly conflicting. This work attempts to clarify the geology of Ikaria by a new geological mapping and structural field study coupled with a thermometric study by Raman spectrometry of carbonaceous material (RSCM). Foliation over the whole island defines a structural dome, lately intruded by intrusive granitic bodies. Lineation shows a ca. N-S ductile stretching associated with an overall top-to-the-North sense of shear. Final exhumation of the dome was thus completed by a system of two top-to-the-North detachments, operating in the ductile and then the brittle fields. The proposed tectono-metamorphic evolution of the dome is consistent with the evolution of the northern Aegean area, suggesting that Ikaria belongs to the Aegean MCC and that the NCDS continues eastward. Besides, the distribution of RSCM temperatures within the dome and the presence of migmatites in the western part of the island comply with the description of migmatite-cored MCC such as Naxos or Mykonos. A better comprehension of the geology of the island also permits to discuss the correlations of tectonic events and nappes between the Cyclades and the neighboring Menderes massif in western Turkey
Basement – Cover decoupling and progressive exhumation of metamorphic sediments at hot rifted margin. Insights from the Northeastern Pyrenean analog
International audienceWe compile field data collected along the eastern part of the North Pyrenean Zone (NPZ) to point to a tectonic evolution under peculiar thermal conditions applying to the basin sediments in relation with the opening of the Cretaceous Pyrenean rift. Based on this compilation, we show that when thinning of the continental crust increased , isotherms moved closer to the surface with the result that the brittle-ductile transition propagated upward and reached sediments deposited at the early stage of the basin opening. During the continental breakup, the pre-rift Mesozoic cover was efficiently decoupled from the Paleozoic basement along the Triassic evaporite level and underwent drastic ductile thinning and boudinage. We suggest that the upper Albian and upper Creta-ceous flysches acted as a blanket allowing temperature increase in the mobile pre-rift cover. Finally, we show that continuous spreading of the basin floor triggered the exhumation of the metamorphic, ductily sheared pre-rift cover, thus contributing to the progressive thinning of the sedimentary pile. In a second step, we investigate the detailed geological records of such a hot regime evolution along a reference-section of the eastern NPZ. We propose a balanced restoration from the Mouthoumet basement massif (north) to the Boucheville Albian basin (south). This section shows a north to south increase in the HT Pyrenean imprint from almost no metamorphic recrystallization to more than 600 °C in the pre-and syn-rift sediments. From this reconstruction, we propose a scenario of tectonic thinning involving the exhumation of the pre-rift cover by the activation of various detachment surfaces at different levels in the sedimentary pile. In a third step, examination of the architecture of current distal passive margin domains provides confident comparison between the Pyrenean case and modern analogs. Finally, we propose a general evolutionary model for the pre-rift sequence of the Northeastern Pyrenean rifted margin
Tectono-thermal history of an exhumed thrust-sheet-top basin : an example from the south Pyrenean thrust belt
This paper presents a new balanced structural cross-section of the Jaca thrust-sheet-top basin of the southern Pyrenees combined with paleo-thermometry and apatite fission track (AFT) thermochronology data. The cross-section, based on field data and interpretation of industrial seismic reflection profiles, allows refinement of previous interpretations of the south-directed thrust system, involving the identification of new thrust faults, and of the kinematic relationships between basement and cover thrusts from the middle Eocene to the early Miocene. AFT analysis shows a southward decrease in the level of fission track resetting, from totally reset Paleozoic rocks and lower Eocene turbidites (indicative of heating to Tmax>~120°C), to partially reset middle Eocene turbidites and no/very weak resetting in the upper Eocene-lower Oligocene molasse (Tmax<~60°C). AFT results indicate a late Oligocene-early Miocene cooling event throughout the Axial Zone and Jaca Basin. Paleo-maximum temperatures determined by vitrinite reflectance measurements and Raman spectroscopy of carbonaceous material reach up to ~240°C at the base of the turbidite succession. Inverse modelling of AFT and vitrinite reflectance data with the QTQt software for key samples show compatibility between vitrinite-derived Tmax and the AFT reset level for most of the samples. However, they also suggest that the highest temperatures determined in the lowermost turbidites correspond to a thermal anomaly rather than burial heating, possibly due to fluid circulation during thrust activity. From these results, we propose a new sequential restoration of the south Pyrenean thrust system propagation and related basin evolution
- …