Quantum Confinement and Electronic Structure at the Surface of van der Waals Ferroelectric {\alpha}-In2_{2}Se3_{3}

Two-dimensional (2D) ferroelectric (FE) materials are promising compounds for next-generation nonvolatile memories, due to their low energy consumption and high endurance. Among them, {\alpha}-In$_{2}$Se$_{3}$ has drawn particular attention due to its in- and out-of-plane ferroelectricity, whose robustness has been demonstrated down to the monolayer limit. This is a relatively uncommon behavior since most bulk FE materials lose their ferroelectric character at the 2D limit due to depolarization field. Using angle resolved photoemission spectroscopy (ARPES), we unveil another unusual 2D phenomena appearing in 2H \alpha-In$_{2}$Se$_{3}$ single crystals, the occurrence of a highly metallic two-dimensional electron gas (2DEG) at the surface of vacuum-cleaved crystals. This 2DEG exhibits two confined states which correspond to an electron density of approximatively 10$^{13}$ electrons/cm$^{3}$, also confirmed by thermoelectric measurements. Combination of ARPES and density functional theory (DFT) calculations reveals a direct band gap of energy equal to 1.3 +/- 0.1 eV, with the bottom of the conduction band localized at the center of the Brillouin zone, just below the Fermi level. Such strong n-type doping further supports the quantum confinement of electrons and the formation of the 2DEG.Comment: 20 pages, 12 figure

Measures in Visualization Space

Postponed access: the file will be available after 2021-08-12Measurement is an integral part of modern science, providing the fundamental means for evaluation, comparison, and prediction. In the context of visualization, several different types of measures have been proposed, ranging from approaches that evaluate particular aspects of visualization techniques, their perceptual characteristics, and even economic factors. Furthermore, there are approaches that attempt to provide means for measuring general properties of the visualization process as a whole. Measures can be quantitative or qualitative, and one of the primary goals is to provide objective means for reasoning about visualizations and their effectiveness. As such, they play a central role in the development of scientific theories for visualization. In this chapter, we provide an overview of the current state of the art, survey and classify different types of visualization measures, characterize their strengths and drawbacks, and provide an outline of open challenges for future research.acceptedVersio

Reactive Infiltration of MORB-Eclogite-Derived Carbonated Silicate Melt into Fertile Peridotite at 3GPa and Genesis of Alkalic Magmas

We performed experiments between two different carbonated eclogite-derived melts and lherzolite at 1375°C and 3 GPa by varying the reacting melt fraction from 8 to 50 wt %. The two starting melt compositions were (1) alkalic basalt with 11·7 wt % dissolved CO2 (ABC), (2) basaltic andesite with 2·6 wt % dissolved CO2 (BAC). The starting melts were mixed homogeneously with peridotite to simulate porous reactive infiltration of melt in the Earth’s mantle. All the experiments produced an assemblage of melt + orthopyroxene + clinopyroxene + garnet ± olivine; olivine was absent for a reacting melt fraction of 50 wt % for ABC and 40 wt % for BAC. Basanitic ABC evolved to melilitites (on a CO2-free basis, SiO2 ∼27–39 wt %, TiO2 ∼2·8–6·3 wt %, Al2O3 ∼4·1–9·1 wt %, FeO* ∼11–16 wt %, MgO ∼17–21 wt %, CaO ∼13–21 wt %, Na2O ∼4–7 wt %, CO2 ∼10–25 wt %) upon melt–rock reaction and the degree of alkalinity of the reacted melts is positively correlated with melt–rock ratio. On the other hand, reacted melts derived from BAC (on a CO2-free basis SiO2 ∼42–53 wt %, TiO2 ∼6·4–8·7 wt %, Al2O3 ∼10·5–12·3 wt %, FeO* ∼6·5–10·5 wt %, MgO ∼7·9–15·4 wt %, CaO ∼7·3–10·3 wt %, Na2O ∼3·4–4 wt %, CO2 ∼6·2–11·7 wt %) increase in alkalinity with decreasing melt–rock ratio. We demonstrate that owing to the presence of only 0·65 wt % of CO2 in the bulk melt–rock mixture (corresponding to 25 wt % BAC + lherzolite mixture), nephelinitic-basanite melts can be generated by partial reactive crystallization of basaltic andesite as opposed to basanites produced in volatile-free conditions. Post 20% olivine fractionation, the reacted melts derived from ABC at low to intermediate melt–rock ratios match with 20–40% of the population of natural nephelinites and melilitites in terms of SiO2 and CaO/Al2O3, 60–80% in terms of TiO2, Al2O3 and FeO, and <20% in terms of CaO and Na2O. The reacted melts from BAC, at intermediate melt–rock ratios, are excellent matches for some of the Mg-rich (MgO >15 wt %) natural nephelinites in terms of SiO2, Al2O3, FeO*, CaO, Na2O and CaO/Al2O3. Not only can these reacted melts erupt by themselves, they can also act as metasomatizing agents in the Earth’s mantle. Our study suggests that a combination of subducted, silica-saturated crust–peridotite interaction and the presence of CO2 in the mantle source region are sufficient to produce a large range of primitive alkalic basalts. Also, mantle potential temperatures of 1330–1350°C appear sufficient to produce high-MgO, primitive basanite–nephelinite if carbonated eclogite melt and peridotite interaction is taken into account

Composition, crystallization conditions and genesis of sulfide-saturated parental melts of olivine-phyric rocks from Kamchatsky Mys (Kamchatka, Russia)

Highlights • Parental melts of sulfide-bearing KM rocks have near primary MORB-like composition. • Crystallization of these S-saturated melts occurred in near-surface conditions. • Extensive fractionation and crustal assimilation are not the causes of S-saturation. • S content in melts can be restored by accounting for daughter sulfide globules. Abstract Sulfide liquids that immiscibly separate from silicate melts in different magmatic processes accumulate chalcophile metals and may represent important sources of the metals in Earth's crust for the formation of ore deposits. Sulfide phases commonly found in some primitive mid-ocean ridge basalts (MORB) may support the occurrence of sulfide immiscibility in the crust without requiring magma contamination and/or extensive fractionation. However, the records of incipient sulfide melts in equilibrium with primitive high-Mg olivine and Cr-spinel are scarce. Sulfide globules in olivine phenocrysts in picritic rocks of MORB-affinity at Kamchatsky Mys (Eastern Kamchatka, Russia) represent a well-documented example of natural immiscibility in primitive oceanic magmas. Our study examines the conditions of silicate-sulfide immiscibility in these magmas by reporting high precision data on the compositions of Cr-spinel and silicate melt inclusions, hosted in Mg-rich olivine (86.9–90 mol% Fo), which also contain globules of magmatic sulfide melt. Major and trace element contents of reconstructed parental silicate melts, redox conditions (ΔQFM = +0.1 ± 0.16 (1σ) log. units) and crystallization temperature (1200–1285 °C), as well as mantle potential temperatures (~1350 °C), correspond to typical MORB values. We show that nearly 50% of sulfur could be captured in daughter sulfide globules even in reheated melt inclusions, which could lead to a significant underestimation of sulfur content in reconstructed silicate melts. The saturation of these melts in sulfur appears to be unrelated to the effects of melt crystallization and crustal assimilation, so we discuss the reasons for the S variations in reconstructed melts and the influence of pressure and other parameters on the SCSS (Sulfur Content at Sulfide Saturation)

Diffraction techniques and vibrational spectroscopy opportunities to characterise bones

From a histological point of view, bones that allow body mobility and protection of internal organs consist not only of different organic and inorganic tissues but include vascular and nervous elements as well. Moreover, due to its ability to host different ions and cations, its mineral part represents an important reservoir, playing a key role in the metabolic activity of the organism. From a structural point of view, bones can be considered as a composite material displaying a hierarchical structure at different scales. At the nanometre scale, an organic part, i.e. collagen fibrils and an inorganic part, i.e. calcium phosphate nanocrystals are intimately mixed to assure particular mechanical properties

Lawson criterion for ignition exceeded in an inertial fusion experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion