Voltammetric Determination of the Herbicide Linuron Using a Tricresyl Phosphate-Based Carbon Paste Electrode

This paper summarises the results of voltammetric studies on the herbicide 3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea (Linuron), using a carbon paste electrode containing tricresyl phosphate (TCP-CPE) as liquid binder. The principal experimental conditions, such as the pH effect, investigated in Britton-Robinson buffer solutions (pH 2.0–7.0), the peak characteristics for the analyte of interest, or instrumental parameters for the differential pulse voltammetric mode were optimized for the method. As found out, the best electroanalytical performance of the TCP-CPE was achieved at pH 2.0, whereby the oxidation peak of Linuron appeared at ca. +1.3 V vs. SCE. The analytical procedure developed offers good linearity in the concentration range of 1.25–44.20 μg mL−1 (1.77 × 10−4–5.05 × 10−6 mol L−1), showing—for the first time—the applicability of the TCP-CPE for anodic oxidations in direct voltammetry (without accumulation). The method was then verified by determining Linuron in a spiked river water sample and a commercial formulation and the results obtained agreed well with those obtained by the reference HPLC/UV determination

Micro-PIXE studies on prehistoric chert tools: elemental mapping to determine Palaeolithic lithic procurement

This paper contributes to an understanding of the distances and choices involved in raw material procurement strategies by Upper Palaeolithic communities through a Pyrenean geoarchaeological case study. Methodologically it involved using Particle Induced X-ray Emission (PIXE) with a focused proton beam to determine the concentration and distribution of elements in geological samples from three natural primary outcrops belonging to two geological formations outcropping in the French side of the Pyrenees. While it was not possible to distinguish the formation through reference to major and minor elements, some variations were revealed at the trace elemental level. With the aim to determine if these elements were associated with the Si matrix or to a specific inclusion, elemental maps were acquired and the elemental composition of the identified inclusions were also determined. These chemical signatures were then compared to those generated from archaeological artefacts from sites in northern Spain as a means of reconstructing the catchment areas used by prehistoric groups for their chert procurement. The results indicate the existence of trans-Pyrenean long distance procurement strategies during the Magdalenian (13700 to the 18800 cal BP)

New short cationic antibacterial peptides. Synthesis, biological activity and mechanism of action

We report a theoretical and experimental study on a new series of small-sized antibacterial peptides. Synthesis and bioassays for these peptides are reported here. In addition, we evaluated different physicochemical parameters that modulate antimicrobial activity (charge, secondary structure, amphipathicity, hydrophobicity and polarity). We also performed molecular dynamic simulations to assess the interaction between these peptides and their molecular target (the membrane). Biophysical characterization of the peptides was carried out with different techniques, such as circular dichroism (CD), linear dichroism (LD), infrared spectroscopy (IR), dynamic light scattering (DLS), fluorescence spectroscopy and TEM studies using model systems (liposomes) for mammalian and bacterial membranes. The results of this study allow us to draw important conclusions on three different aspects. Theoretical and experimental results indicate that small-sized peptides have a particular mechanism of action that is different to that of large peptides. These results provide additional support for a previously proposed four-step mechanism of action. The possible pharmacophoric requirement for these small-sized peptides is discussed. Furthermore, our results indicate that a net +4 charge is the adequate for 9 amino acid long peptides to produce antibacterial activity. The information reported here is very important for designing new antibacterial peptides with these structural characteristics.Fil: Lima, Beatriz Viviana. Universidad Nacional de San Juan; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Juan; ArgentinaFil: Ricci, Maria. Természettudományi Kutatóközpont; HungríaFil: Garro, Adriana. Universidad Nacional de San Luis; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis. Universidad Nacional de San Luis. Facultad de Ciencias Físico Matemáticas y Naturales. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis; ArgentinaFil: Juhász, Tünde. Természettudományi Kutatóközpont; HungríaFil: Szigyártó, Imola Csilla. Természettudományi Kutatóközpont; HungríaFil: Papp, Zita I.. Szegedi Tudományegyetem; HungríaFil: Feresin, Gabriela Egly. Universidad Nacional de San Juan; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Juan; ArgentinaFil: Garcia de la Torre, Jose. Universidad de Murcia; EspañaFil: Lopez Cascales, Jose Javier. Universidad Politécnica de Cartagena; EspañaFil: Fülöp, Lívia. Szegedi Tudományegyetem; HungríaFil: Beke-Somfai, Tamás. Természettudományi Kutatóközpont; HungríaFil: Enriz, Ricardo Daniel. Universidad Nacional de San Luis; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis. Universidad Nacional de San Luis. Facultad de Ciencias Físico Matemáticas y Naturales. Instituto Multidisciplinario de Investigaciones Biológicas de San Luis; Argentin

Bead arrays for antibody and complement profiling reveal joint contribution of antibody isotypes to C3 deposition

The development of antigen arrays has provided researchers with great tools to identify reactivities against self or foreign antigens from body fluids. Yet, these approaches mostly do not address antibody isotypes and their effector functions even though these are key points for a more detailed understanding of disease processes. Here, we present a bead array-based assay for a multiplexed determination of antigen-specific antibody levels in parallel with their properties for complement activation. We measured the deposition of C3 fragments from serum samples to reflect the degree of complement activation via all three complement activation pathways. We utilized the assay on a bead array containing native and citrullinated peptide antigens to investigate the levels of IgG, IgM and IgA autoantibodies along with their complement activating properties in serum samples of 41 rheumatoid arthritis patients and 40 controls. Our analysis revealed significantly higher IgG reactivity against the citrullinated fibrinogen β and filaggrin peptides as well as an IgA reactivity that was exclusive for citrullinated fibrinogen β peptide and C3 deposition in rheumatoid arthritis patients. In addition, we characterized the humoral immune response against the viral EBNA-1 antigen to demonstrate the applicability of this assay beyond autoimmune conditions. We observed that particular buffer compositions were demanded for separate measurement of antibody reactivity and complement activation, as detection of antigen-antibody complexes appeared to be masked due to C3 deposition. We also found that rheumatoid factors of IgM isotype altered C3 deposition and introduced false-positive reactivities against EBNA-1 antigen. In conclusion, the presented bead-based assay setup can be utilized to profile antibody reactivities and immune-complex induced complement activation in a high-throughput manner and could facilitate the understanding and diagnosis of several diseases where complement activation plays role in the pathomechanism

SPECIAL ISSUE HIV and CHRONIC PAIN (The Global Task Force for Chronic Pain in People with HIV (PWH): Developing a research agenda in an emerging field)

Chronic pain is a common comorbidity in people with HIV (PWH), with prevalence estimates of 25-85%. Research in this area is growing, but significant gaps remain. A Global Task Force of HIV experts was organized to brainstorm a scientific agenda and identify measurement domains critical to advancing research in this field. Experts were identified through literature searches and snowball sampling. Two online questionnaires were developed by Task Force members. Questionnaire 1 asked participants to identify knowledge gaps in the field of HIV and chronic pain and identify measurement domains in studies of chronic pain in PWH. Responses were ranked in order of importance in Questionnaire 2, which was followed by a group discussion. 29 experts completed Questionnaire 1, 25 completed Questionnaire 2, and 21 participated in the group. Many important clinical and research priorities emerged, including the need to examine etiologies of chronic pain in PWH. Pain-related measurement domains were discussed, with a primary focus on domains that could be assessed in a standardized manner across various cohorts that include PWH in different countries. We collaboratively identified clinical and research priorities, as well as gaps in standardization of measurement domains, that can be used to move the field forward

The Borexino detector at the Laboratori Nazionali del Gran Sasso

Borexino, a large volume detector for low energy neutrino spectroscopy, is currently running underground at the Laboratori Nazionali del Gran Sasso, Italy. The main goal of the experiment is the real-time measurement of sub MeV solar neutrinos, and particularly of the mono energetic (862 keV) Be7 electron capture neutrinos, via neutrino-electron scattering in an ultra-pure liquid scintillator. This paper is mostly devoted to the description of the detector structure, the photomultipliers, the electronics, and the trigger and calibration systems. The real performance of the detector, which always meets, and sometimes exceeds, design expectations, is also shown. Some important aspects of the Borexino project, i.e. the fluid handling plants, the purification techniques and the filling procedures, are not covered in this paper and are, or will be, published elsewhere (see Introduction and Bibliography).Comment: 37 pages, 43 figures, to be submitted to NI