1,777 research outputs found
Report and preliminary results of R/V POSEIDON cruise POS500, LISA, Ligurian Slope AUV mapping, gravity coring and seismic reflection, Catania (Italy) – Malaga (Spain), 25.05.2016 – 09.06.2016
Cruise POS500 “LISA” with R/V Poseidon studied the western Ligurian Margin off
Southern France, an area in the northeastern part of the western Mediterranean Sea
characterized by its active tectonism and frequent mass wasting. The region near the Var
estuary close to the city of Nice is particularly suited for landslide research because it
represents a natural laboratority where it is possible to study a series of trigger processes of
geological and anthropogenic origin. The aim of this MARUM expedition was to:
i. Study fresh water seepage in the marine Nice airport landslide and adjacent stable
plateau in 15-50 m water depth using water sampling, CTD and geochemistry;
ii. Recover and deploy a number of observatories that monitor, pressure, temperature, tilt
and seismicity;
iii. Run an AUV micro-bathymetric survey with MARUM AUV SEAL5000 to
complement existing multibeam maps; and
iv. Acquire additional high-resolution seismic reflection profiles to unravel the complex
architecture of the Nice slope and Var delta.
In a period of approximately two weeks, we acquired valuable geophysical information that
helps to understand the evolution of this portion of the Ligurian Margin and further to
support an active Amphibious Drilling proposal submitted to ICDP and IODP. We could
also show that heavy spring rainfall plus melt water from the French Maritime Alps supplied
sufficient hydraulic forcing to push Var aquifer groundwaters to seep into the marine
deposits and water column. Freshening was strongest in the 1979 Nice landslide scar, but
was also found at the outer edge of the shelf. Recovery and redeployment of various
observatory prototypes worked well, both for the MARUM MeBo seafloor drillstring tolos
and independent piezometers.
Observatory data have yet to be evaluated. In addition, geochemical analyses of bottom
waters and pore waters was deferred to shore-based laboratorios except for salinity estimates
using a refractometer. Seismic processing was started onboard, but is largely taking place
post-cruise at University Bremen
Modification of the -Meson Lifetime in Nuclear Matter
The photo production of mesons on the nuclei C, Ca, Nb and Pb has
been measured using the Crystal Barrel/TAPS detector at the ELSA tagged photon
facility in Bonn. The dependence of the meson cross section on the
nuclear mass number has been compared with three different types of models, a
Glauber analysis, a BUU analysis of the Giessen theory group and a calculation
by the Valencia theory group. In all three cases, the inelastic width
is found to be at normal nuclear matter density for an
average 3-momentum of 1.1 GeV/c. In the restframe of the meson, this
inelastic width corresponds to a reduction of the lifetime by
a factor . For the first time, the momentum dependent N
cross section has been extracted from the experiment and is in the range of 70
mb.Comment: 5 pages, 4 figure
In-medium mass from the reaction
Data on the photoproduction of mesons on nuclei have been
re-analyzed in a search for in-medium modifications. The data were taken with
the Crystal Barrel(CB)/TAPS detector system at the ELSA accelerator facility in
Bonn. First results from the analysis of the data set were published by D.
Trnka et al. in Phys. Rev. Lett 94 (2005) 192303 \cite{david}, claiming a
lowering of the mass in the nuclear medium by 14 at normal nuclear
matter density. The extracted line shape was found to be sensitive to
the background subtraction. For this reason a re-analysis of the same data set
has been initiated and a new method has been developed to reduce the background
and to determine the shape and absolute magnitude of the background directly
from the data. Details of the re-analysis and of the background determination
are described. The signal on the target, extracted in the
re-analysis, does not show a deviation from the corresponding line shape on a
target, measured as reference. The earlier claim of an in-medium mass
shift is thus not confirmed. The sensitivity of the line shape to
different in-medium modification scenarios is discussed.Comment: 13 pages and 11 figures, submitted for publicatio
Parallel Excluded Volume Tempering for Polymer Melts
We have developed a technique to accelerate the acquisition of effectively
uncorrelated configurations for off-lattice models of dense polymer melts which
makes use of both parallel tempering and large scale Monte Carlo moves. The
method is based upon simulating a set of systems in parallel, each of which has
a slightly different repulsive core potential, such that a thermodynamic path
from full excluded volume to an ideal gas of random walks is generated. While
each system is run with standard stochastic dynamics, resulting in an NVT
ensemble, we implement the parallel tempering through stochastic swaps between
the configurations of adjacent potentials, and the large scale Monte Carlo
moves through attempted pivot and translation moves which reach a realistic
acceptance probability as the limit of the ideal gas of random walks is
approached. Compared to pure stochastic dynamics, this results in an increased
efficiency even for a system of chains as short as monomers, however
at this chain length the large scale Monte Carlo moves were ineffective. For
even longer chains the speedup becomes substantial, as observed from
preliminary data for
Photoproduction of pi0 omega off protons for E(gamma) < 3 GeV
Differential and total cross-sections for photoproduction of gamma proton to
proton pi0 omega and gamma proton to Delta+ omega were determined from
measurements of the CB-ELSA experiment, performed at the electron accelerator
ELSA in Bonn. The measurements covered the photon energy range from the
production threshold up to 3GeV.Comment: 8 pages, 13 figure
Image-guided ToF depth upsampling: a survey
Recently, there has been remarkable growth of interest in the development and applications of time-of-flight (ToF) depth cameras. Despite the permanent improvement of their characteristics, the practical applicability of ToF cameras is still limited by low resolution and quality of depth measurements. This has motivated many researchers to combine ToF cameras with other sensors in order to enhance and upsample depth images. In this paper, we review the approaches that couple ToF depth images with high-resolution optical images. Other classes of upsampling methods are also briefly discussed. Finally, we provide an overview of performance evaluation tests presented in the related studies
Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR
Simulation results for future measurements of electromagnetic proton form
factors at \PANDA (FAIR) within the PandaRoot software framework are reported.
The statistical precision with which the proton form factors can be determined
is estimated. The signal channel is studied on the basis
of two different but consistent procedures. The suppression of the main
background channel, , is studied.
Furthermore, the background versus signal efficiency, statistical and
systematical uncertainties on the extracted proton form factors are evaluated
using two different procedures. The results are consistent with those of a
previous simulation study using an older, simplified framework. However, a
slightly better precision is achieved in the PandaRoot study in a large range
of momentum transfer, assuming the nominal beam conditions and detector
performance
Feasibility studies of the time-like proton electromagnetic form factor measurements with PANDA at FAIR
The possibility of measuring the proton electromagnetic form factors in the
time-like region at FAIR with the \PANDA detector is discussed. Detailed
simulations on signal efficiency for the annihilation of into a
lepton pair as well as for the most important background channels have been
performed. It is shown that precision measurements of the differential cross
section of the reaction can be obtained in a wide
angular and kinematical range. The individual determination of the moduli of
the electric and magnetic proton form factors will be possible up to a value of
momentum transfer squared of (GeV/c). The total cross section will be measured up to (GeV/c).
The results obtained from simulated events are compared to the existing data.
Sensitivity to the two photons exchange mechanism is also investigated.Comment: 12 pages, 4 tables, 8 figures Revised, added details on simulations,
4 tables, 9 figure
Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets
This document is the Technical Design Report covering the two large
spectrometer magnets of the PANDA detector set-up. It shows the conceptual
design of the magnets and their anticipated performance. It precedes the tender
and procurement of the magnets and, hence, is subject to possible modifications
arising during this process.Comment: 10 pages, 14MB, accepted by FAIR STI in May 2009, editors: Inti
Lehmann (chair), Andrea Bersani, Yuri Lobanov, Jost Luehning, Jerzy Smyrski,
Technical Coordiantor: Lars Schmitt, Bernd Lewandowski (deputy),
Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy
- …