Aspects of pressure solution as a deformation mechanism

Imperial Users onl

A study of the Tersilochine parasites of vegetable weevils of the genus Listeroderes (Hym., Ichneumonidae)

In 1942-45, a field study was made of the parasites of vegetable weevils of the genus Listroderes in Argentina and Uruguay (Parker, Berry & Silveria 1950), with the object of rearing suitable parasites for the control of these weevils in California. Three Tersilochine Ichneuntonidae ,were recorded, of which the two commoner were described as Porizon parkeni and argentinensis spp. n. by Blanchard (1945), and the third was not determined to genus. The "Porizon" species were not successfully established in California owing, it is stated, to the difficulty of changing the seasonal rhythm established -in the southern hemisphere.Peer reviewe

Multiple sclerosis in South Africa

Click on the link to view

Constraints on the timing of crustal imbrication in the central Trans-Hudson Orogen from single zircon 207Pb/206Pb ages of granitoid rocks from the Pelican thrust zone, Saskatchewan

The Pelican thrust is a major ductile high-strain zone in the Reindeer Zone, Trans-Hudson Orogen, northern Saskatchewan. It is interpreted as the main sole thrust separating stacked juvenile Paleoproterozoic allochthons and underlying Archean microcontinental crust in this central part of the orogen. Exposed nonmylonitic rocks in the footwall of the thrust consist of the Sahli monzocharnockite and the smaller, more highly retrograded MacMillan Point granite. Protomylonitic to ultramylonitic gneisses in the thrust zone derive from a variety of prethrust protoliths. A footwall "internal suite" mainly comprises quartzofeldspathic orthogneisses ("Q" gneisses) and high-grade migmatitic paragneisses. Hanging-wall "external suite" mylonitic gneisses include feldspar-porphyroclastic hornblendic grey gneisses probably derived from arc plutons, and laminated amphibolites derived from volcanic rocks. The overlying allochthon mainly comprises protoliths equivalent to those of the porphyroclastic orthogneisses and laminated amphibolites, together with interfolded and overlying Paleoproterozoic paragneisses of the Kisseynew domain. The Sahli monzocharnockite yields 207Pb/206Pb zircon and whole-rock Rb-Sr ages of ca. 2500 Ma, and the "Q" gneisses give 207Pb/206Pb zircon ages of up to ca. 2900 Ma, implying that most of the internal suite (footwall) mylonite protoliths are Archean. In contrast, external suite (hanging wall) porphyroclastic orthogneisses yield ca. 1880-1840 Ma 207Pb/206Pb zircon ages. Main, peak-metamorphic displacement on the Pelican thrust is interpreted to have occurred mainly between 1840 and 1820 Ma, as indicated by 207Pb/206Pb zircon ages from small, highly deformed synthrusting granite-pegmatite neosomal bodies in the thrust zone. Undeformed postcollisional granites and pegmatites were emplaced ∼1789 Ma. Total duration from arc development to completion of arc-continent collision was ∼100 Ma. The Pelican thrust zone may be similar in significance and style to younger, major, ocean closure related thrusts such as the Frontal Pennine thrust of the western Alps and the Main Mantle, Main Boundary, and Main Central thrusts of the Himalayas. As for the Pelican thrust, these displace oceanic rocks over older basement.published_or_final_versio

Geochemical and tectonic uplift controls on rock nitrogen inputs across terrestrial ecosystems

Rock contains > 99% of Earth's reactive nitrogen (N), but questions remain over the direct importance of rock N weathering inputs to terrestrial biogeochemical cycling. Here we investigate the factors that regulate rock N abundance and develop a new model for quantifying rock N mobilization fluxes across desert to temperate rainforest ecosystems in California, USA. We analyzed the N content of 968 rock samples from 531 locations and compiled 178 cosmogenically derived denudation estimates from across the region to identify landscapes and ecosystems where rocks account for a significant fraction of terrestrial N inputs. Strong coherence between rock N content and geophysical factors, such as protolith, (i.e. parent rock), grain size, and thermal history, are observed. A spatial model that combines rock geochemistry with lithology and topography demonstrates that average rock N reservoirs range from 0.18 to 1.2 kg N m-3 (80 to 534 mg N kg-1) across the nine geomorphic provinces of California and estimates a rock N denudation flux of 20-92 Gg yr-1 across the entire study area (natural atmospheric inputs ~ 140 Gg yr-1). The model highlights regional differences in rock N mobilization and points to the Coast Ranges, Transverse Ranges, and the Klamath Mountains as regions where rock N could contribute meaningfully to ecosystem N cycling. Contrasting these data to global compilations suggests that our findings are broadly applicable beyond California and that the N abundance and variability in rock are well constrained across most of the Earth system

Analysis of unresolved complex mixtures of hydrocarbons extracted from Late Archean sediments by comprehensive two-dimensional gas chromatography (GC×GC)

Author Posting. © Elsevier B.V., 2008. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Organic Geochemistry 39 (2008): 846-867, doi:10.1016/j.orggeochem.2008.03.006.Hydrocarbon mixtures too complex to resolve by traditional capillary gas chromatrography display gas chromatograms with dramatically rising baselines or “humps” of coeluting compounds that are termed unresolved complex mixtures (UCMs). Because the constituents of UCMs are not ordinarily identified, a large amount of geochemical information is never explored. Gas chromatograms of saturated/unsaturated hydrocarbons extracted from Late Archean argillites and greywackes of the southern Abitibi Province of Ontario, Canada contain UCMs with different appearances or “topologies” relating to the intensity and retention time of the compounds comprising the UCMs. These topologies appear to have some level of stratigraphic organization, such that samples collected at any stratigraphic formation collectively are dominated by UCMs that either elute early- (within a window of C15-C20 of n-alkanes), early- to mid- (C15-C30 of n-alkanes), or have a broad UCM that extends through the entire retention time of the sample (from C15-C42 of n-alkanes). Comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC-MS) was used to resolve the constituents forming these various UCMs. Early- to mid- eluting UCMs are dominated by configurational isomers of alkyl-substituted and non substituted polycyclic compounds that contain up to six rings. Late eluting UCMs are composed of C36-C40 mono-, bi-, and tricyclic archaeal isoprenoid diastereomers. Broad UCMs spanning the retention time of compound elution contain nearly the same compounds observed in the early-, mid-, and late retention time UCMs. Although the origin of the polycyclic compounds is unclear, the variations in the UCM topology appear to depend on the concentration of initial compound classes that have the potential to become isomerized. Isomerization of these constituents may have resulted from hydrothermal alteration of organic matter.This project was supported by NASA Exobiology grant #NAG5-13446 to Fabien Kenig. GC×GC analysis was supported by NSF grant IIS-0430835 and the Seaver Foundation to Christopher M. Reddy. Preparation of the archaeal biphytane standard was supported by NSF grant ARC-0520226 to Benjamin Van Mooy

Development and Microstructural Improvement of Spin Cast High-Speed Steel Rolls

A detailed microstructural analysis was conducted on a series of radial shell samples extracted from commercially produced centrifugally spin casted high-speed steel (HSS) work rolls for finishing hot strip mills (HSM). The systematic microstructural analysis was coupled with a numerical and experimental investigation to improve the life of HSS rolls. An integrated computational-experimental approach was developed to optimize the response of the HSS roll material that permitted the enhancement of the microstructure and properties of the HSS roll shell layer. Local continuous microstructural transformations through the thickness of the shell: carbide formation, precipitation, dissolution sequence and phase changes, were studied in great details. The analyses were conducted with the aid of advanced metallographic and experimental methods, finite-element (FE) analysis, and using commercial software systems to conduct thermodynamic-kinetics predictions. In order to analyze a response of the HSS roll to the hardening heat treatment (HT) and to control stress-strain evolution, a 3-D FE model was developed of the composite structure of the roll. The multilayered model considers nonlinear material properties of each individual layer as a function of temperature, based on measured chemical composition gradients through the HSS shell. Transient coupled thermal-stress analysis was performed, using actual measured surface temperatures as boundary conditions (BC) for the FE model. The allowable thermal stress-strain levels were established and compared with a) thermodynamically predicted high temperature mechanical properties and b) room temperature test results of the shear strengths for the shell, bonding and core. In addition, sub-structuring and image-based processing techniques were implemented to aid in the development of a meso-scale FE model to simulate the local response of a given microstructural constituents and matrix under particular thermal conditions. The fundamental interpretation of multilayered structure and multi-scale approach help to understand the kinetics phenomena associated with continuous local microstructural transformations due to nonlinear heat transfer. The results from the microstructural observations were in good agreement with the numerical predictions. The major impact of this work clearly indicated that a refined as-cast structure prior to the heat treatment promoted an increased precipitation of carbides during final hardening, which greatly improved strength and performance. A non-conventional HT was defined and implemented in order to provide an additional degree of microstructural pre-conditioning, which homogenized the matrix throughout the HSS shell. The new HT defined the austenitization temperatures and times to modify the morphology of brittle interdendritic eutectic carbide networks and, hence, facilitating the kinetics of dissolution of these carbides. This behavior caused an increase in the solute content of the matrix. As a result, the matrix hardness and strength were increased during subsequent hardening HT in comparison to the conventional HT routes used for as-cast HSS rolls. Reports about rolls with the new material that have been placed in service indicate that the rolls last 50-70% longer

Eocene and Miocene extension, meteoric fluid infiltration, and core complex formation in the Great Basin (Raft River Mountains, Utah)

Metamorphic core complexes (MCCs) in the North American Cordillera reflect the effects of lithospheric extension and contribute to crustal adjustments both during and after a protracted subduction history along the Pacific plate margin. While the Miocene-to-recent history of most MCCs in the Great Basin, including the Raft River-Albion-Grouse Creek MCC, is well documented, early Cenozoic tectonic fabrics are commonly severely overprinted. We present stable isotope, geochronological (40Ar/39Ar), and microstructural data from the Raft River detachment shear zone. Hydrogen isotope ratios of syntectonic white mica (δ2Hms) from mylonitic quartzite within the shear zone are very low (-90‰ to -154‰, Vienna SMOW) and result from multiphase synkinematic interaction with surface-derived fluids. 40Ar/39Ar geochronology reveals Eocene (re)crystallization of white mica with δ2Hms ≥ -154‰ in quartzite mylonite of the western segment of the detachment system. These δ2Hms values are distinctively lower than in localities farther east (δ2Hms ≥ -125‰), where 40Ar/39Ar geochronological data indicate Miocene (18-15 Ma) extensional shearing and mylonitic fabric formation. These data indicate that very low δ2H surface-derived fluids penetrated the brittle-ductile transition as early as the mid-Eocene during a first phase of exhumation along a detachment rooted to the east. In the eastern part of the core complex, prominent top-to-the-east ductile shearing, mid-Miocene 40Ar/39Ar ages, and higher δ2H values of recrystallized white mica, indicate Miocene structural and isotopic overprinting of Eocene fabrics