539 research outputs found
Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate
Debris control and surface quality are potential major benefits of sample liquid immersion when laser micromachining; however, the use of an immersion technique potentially modifies the ablation mechanism when compared to an ambient air interaction. To investigate the machining characteristics, bisphenol A polycarbonate has been laser machined in air and under a controllable open liquid film. To provide quantitative analysis, ablation threshold, ablation rate and the attenuation coefficient of the immersing DI water fluid were measured. In ambient air the threshold fluence was measured to be 37 mJ.cm-2. Thin film immersion displayed two trends: threshold fluences of 58.6 mJcm-2 and 83.9 mJcm-2. The attenuation of DI water was found to be negligible; thus, the change in ablation rate resulted from increased confinement of the vapour plume by the liquid medium, generating higher Bremsstrahlung attenuation of the beam, lowering the laser etch rate. Simultaneously, splashing motivated by the confined ablation plume allowed release of plume pressure before plume etching commenced. This contributed to the loss of total etching efficiency. Two interaction scenarios were obsereved as a result of splashing: (i) intermediate threshold fluence, where splashing occured after every pulse in a mode that interrupted the flow entirely, leaving an ambient air interaction for the following pulse; (ii) high threshold fluence, where splashing occured for every pulse in a mode that allowed the flow to recommence over the image before the next pulse causing every pulse to experience Bremsstrahlung attenuation. Since attenuation of the immersion liquid was negligible, it is the action of the constrained ablation plume within a thin flowing immersion liquid, the resultant Bremsstrahlung attenuation and splashing events that are the critical mechanisms that modify the primary ablation characteristics
Combined CI+MBPT calculations of energy levels and transition amplitudes in Be, Mg, Ca, and Sr
Configuration interaction (CI) calculations in atoms with two valence
electrons, carried out in the V(N-2) Hartree-Fock potential of the core, are
corrected for core-valence interactions using many-body perturbation theory
(MBPT). Two variants of the mixed CI+MBPT theory are described and applied to
obtain energy levels and transition amplitudes for Be, Mg, Ca, and Sr
Inclusive electron scattering in a relativistic Green function approach
A relativistic Green function approach to the inclusive quasielastic (e,e')
scattering is presented. The single particle Green function is expanded in
terms of the eigenfunctions of the nonhermitian optical potential. This allows
one to treat final state interactions consistently in the inclusive and in the
exclusive reactions. Numerical results for the response functions and the cross
sections for different target nuclei and in a wide range of kinematics are
presented and discussed in comparison with experimental data.Comment: 12 pages, 7 figures, REVTeX
Survey of nucleon electromagnetic form factors
A dressed-quark core contribution to nucleon electromagnetic form factors is
calculated. It is defined by the solution of a Poincare' covariant Faddeev
equation in which dressed-quarks provide the elementary degree of freedom and
correlations between them are expressed via diquarks. The nucleon-photon vertex
involves a single parameter; i.e., a diquark charge radius. It is argued to be
commensurate with the pion's charge radius. A comprehensive analysis and
explanation of the form factors is built upon this foundation. A particular
feature of the study is a separation of form factor contributions into those
from different diagram types and correlation sectors, and subsequently a
flavour separation for each of these. Amongst the extensive body of results
that one could highlight are: r_1^{n,u}>r_1^{n,d}, owing to the presence of
axial-vector quark-quark correlations; and for both the neutron and proton the
ratio of Sachs electric and magnetic form factors possesses a zero.Comment: 43 pages, 17 figures, 12 tables, 5 appendice
Recoil Polarization for Delta Excitation in Pion Electroproduction
We measured angular distributions of recoil-polarization response functions
for neutral pion electroproduction for W=1.23 GeV at Q^2=1.0 (GeV/c)^2,
obtaining 14 separated response functions plus 2 Rosenbluth combinations; of
these, 12 have been observed for the first time. Dynamical models do not
describe quantities governed by imaginary parts of interference products well,
indicating the need for adjusting magnitudes and phases for nonresonant
amplitudes. We performed a nearly model-independent multipole analysis and
obtained values for Re(S1+/M1+)=-(6.84+/-0.15)% and Re(E1+/M1+)=-(2.91+/-0.19)%
that are distinctly different from those from the traditional Legendre analysis
based upon M1+ dominance and sp truncation.Comment: 5 pages, 2 figures, for PR
Black Hole Spin via Continuum Fitting and the Role of Spin in Powering Transient Jets
The spins of ten stellar black holes have been measured using the
continuum-fitting method. These black holes are located in two distinct classes
of X-ray binary systems, one that is persistently X-ray bright and another that
is transient. Both the persistent and transient black holes remain for long
periods in a state where their spectra are dominated by a thermal accretion
disk component. The spin of a black hole of known mass and distance can be
measured by fitting this thermal continuum spectrum to the thin-disk model of
Novikov and Thorne; the key fit parameter is the radius of the inner edge of
the black hole's accretion disk. Strong observational and theoretical evidence
links the inner-disk radius to the radius of the innermost stable circular
orbit, which is trivially related to the dimensionless spin parameter a_* of
the black hole (|a_*| < 1). The ten spins that have so far been measured by
this continuum-fitting method range widely from a_* \approx 0 to a_* > 0.95.
The robustness of the method is demonstrated by the dozens or hundreds of
independent and consistent measurements of spin that have been obtained for
several black holes, and through careful consideration of many sources of
systematic error. Among the results discussed is a dichotomy between the
transient and persistent black holes; the latter have higher spins and larger
masses. Also discussed is recently discovered evidence in the transient sources
for a correlation between the power of ballistic jets and black hole spin.Comment: 30 pages. Accepted for publication in Space Science Reviews. Also to
appear in hard cover in the Space Sciences Series of ISSI "The Physics of
Accretion onto Black Holes" (Springer Publisher). Changes to Sections 5.2,
6.1 and 7.4. Section 7.4 responds to Russell et al. 2013 (MNRAS, 431, 405)
who find no evidence for a correlation between the power of ballistic jets
and black hole spi
Virtual Compton Scattering and Neutral Pion Electroproduction in the Resonance Region up to the Deep Inelastic Region at Backward Angles
We have made the first measurements of the virtual Compton scattering (VCS)
process via the H exclusive reaction in the nucleon resonance
region, at backward angles. Results are presented for the -dependence at
fixed GeV, and for the -dependence at fixed near 1.5 GeV.
The VCS data show resonant structures in the first and second resonance
regions. The observed -dependence is smooth. The measured ratio of
H to H cross sections emphasizes the different
sensitivity of these two reactions to the various nucleon resonances. Finally,
when compared to Real Compton Scattering (RCS) at high energy and large angles,
our VCS data at the highest (1.8-1.9 GeV) show a striking -
independence, which may suggest a transition to a perturbative scattering
mechanism at the quark level.Comment: 20 pages, 8 figures. To appear in Phys.Rev.
Aluminum oxide barrier coatings on polymer films for food packaging applications
In the field of packaging, barrier layers are functional films, which can be applied to polymeric substrates with the objective of enhancing their end-use properties. For food packaging applications, the packaging material is required to preserve packaged food stuffs and protect them from a variety of environmental influences, particularly moisture and oxygen ingress and UV radiation. Aluminum metallized films are widely used for this purpose. More recently, transparent barrier coatings based on aluminum oxide or silicon oxide have been introduced in order to fulfill requirements such as product visibility, microwaveability or retortability. With the demand for transparent barrier films for low-cost packaging applications growing, the use of high-speed vacuum deposition techniques, such as roll-to-roll metallizers, has become a favorable and powerful tool. In this study, aluminum oxide barrier coatings have been deposited onto biaxially oriented polypropylene and polyethylene terephthalate film substrates via reactive evaporation using an industrial 'boat-type' roll-to-roll metallizer. The coated films have been investigated and compared to uncoated films in terms of barrier properties, surface topography, roughness and surface energy using scanning electron microscopy, atomic force microscopy and contact angle measurement. Coating to substrate adhesion and coating thickness have been examined via peel tests and transmission electron microscopy, respectively. © 2013 Elsevier B.V
Heavy Quarks and Heavy Quarkonia as Tests of Thermalization
We present here a brief summary of new results on heavy quarks and heavy
quarkonia from the PHENIX experiment as presented at the "Quark Gluon Plasma
Thermalization" Workshop in Vienna, Austria in August 2005, directly following
the International Quark Matter Conference in Hungary.Comment: 8 pages, 5 figures, Quark Gluon Plasma Thermalization Workshop
(Vienna August 2005) Proceeding
Proximity effect at superconducting Sn-Bi2Se3 interface
We have investigated the conductance spectra of Sn-Bi2Se3 interface junctions
down to 250 mK and in different magnetic fields. A number of conductance
anomalies were observed below the superconducting transition temperature of Sn,
including a small gap different from that of Sn, and a zero-bias conductance
peak growing up at lower temperatures. We discussed the possible origins of the
smaller gap and the zero-bias conductance peak. These phenomena support that a
proximity-effect-induced chiral superconducting phase is formed at the
interface between the superconducting Sn and the strong spin-orbit coupling
material Bi2Se3.Comment: 7 pages, 8 figure
- …