Tunable uptake of poly(ethylene oxide) by graphite-oxide-based materials

We investigate the role of structure and chemical composition on the uptake of poly(ethylene oxide) by a series of graphite oxides (GOs) and thermally reduced GOs, leading to the formation of polymer-intercalated GO and polymer-adsorbed graphene nanostructures. To this end, a series of poly(ethylene oxide) (PEO) - GO hybrid materials exhibiting a variable degree of GO oxidation and exfoliation has been investigated in detail using a combination of techniques including X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetry, scanning-electron microscopy, and nitrogen adsorption. Intercalation of the polymer phase into well-defined GO galleries is found to correlate well with both the degree of GO oxidation and with the presence of hydroxyl groups. The latter feature is an essential prerequisite to optimize polymer uptake owing to the predominance of hydrogen-bonding interactions between intercalant and host. Unlike the bulk polymer, these intercalation compounds show neither crystallisation nor glass-transition associated with the polymer phase. Exfoliation and reduction of GO result in high-surface-area graphene layers exhibiting the highest polymer uptake in these GO-based materials. In this case, PEO undergoes surface adsorption, where we observe the recovery of glass and melting transitions associated with the polymer phase albeit at significantly lower temperatures than the bulk

High Prevalence of Primary Multidrug Resistant Tuberculosis in Persons with No Known Risk Factors

INTRODUCTION: In high multidrug resistant (MDR) tuberculosis (TB) prevalence areas, drug susceptibility testing (DST) at diagnosis is recommended for patients with risk factors for MDR. However, this approach might miss a substantial proportion of MDR-TB in the general population. We studied primary MDR in patients considered to be at low risk of MDR-TB in Lima, Peru. METHODS: We enrolled new sputum smear-positive TB patients who did not report any MDR-TB risk factor: known exposure to a TB patient whose treatment failed or who died or who was known to have MDR-TB; immunosuppressive co-morbidities, ex prison inmates; prison and health care workers; and alcohol or drug abuse. A structured questionnaire was applied to all enrolled participants to confirm the absence of these factors and thus minimize underreporting. Sputum from all participants was cultured on Lowenstein-Jensen media and DST for first line drugs was performed using the 7H10 agar method. RESULTS: Of 875 participants with complete data, 23.2% (203) had risk factors for MDR-TB elicited after enrolment. Among the group with no reported risk factors who had a positive culture, we found a 6.3% (95%CI 4.4-8.3) (37/584) rate of MDR-TB. In this group no epidemiological characteristics were associated with MDR-TB. Thus, in this group, multidrug resistance occurred in patients with no identifiable risk factors. CONCLUSIONS: We found a high rate of primary MDR-TB in a general population with no identifiable risk factors for MDR-TB. This suggests that in a high endemic area targeting patients for MDR-TB based on the presence of risk factors is an insufficient intervention

Catalytic steam gasification of biomass for a sustainable hydrogen future: influence of catalyst composition

Hydrogen is regarded as a clean energy for fuelling the future. Hydrogen will be the energy carrier from other resources such as hydropower, wind, solar and biomass. Producing hydrogen from gasification of biomass wastes, particularly in the presence of steam, represents a promising route to produce this clean and CO2-neutral fuel. The steam pyrolysis-gasification ofbiomass (wood sawdust) was carried out with various nickel-based catalysts for hydrogen production in a two-stage fixed bed reaction system. The wood sawdust was pyrolysed in the first reactor and the derived products were gasified in the second reactor in the presence of the catalyst and steam. The synthesised Ni-Ca-Al and Ni-Zn-Al catalysts were preparedbyco-precipitation method with different Ni loadings of 20 mol% and various Zn/Al or Ca/Al ratios, which were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and temperature-programmed oxidation (TPO). The results showed that the Ni/Zn-Al (1:9) catalyst resulted in higher hydrogenproduction(23.9 mmol H2 g-1biomass)compared with the Ni/Ca-Al (1:9) catalyst (12.7 23.9 mmol H2 g-1 biomass) and in addition, the increase of Ca or Zn content in the catalyst slightly increased the hydrogen production. The TPO results showed that the catalyst suffered negligible coke deposition from the catalytic steam pyrolysis/gasification of wood sawdust. Additionally, Na2CO3 basic solution was also found toproduce a catalyst with better performance and lower coke deposition, compared with NH4OH catalyst preparation agent, as observed by TPO, SEM and TEM analysis

Clues from nearby galaxies to a better theory of cosmic evolution

The great advances in the network of cosmological tests show that the relativistic Big Bang theory is a good description of our expanding universe. But the properties of nearby galaxies that can be observed in greatest detail suggest a still better theory would more rapidly gather matter into galaxies and groups of galaxies. This happens in theoretical ideas now under discussion.Comment: published in Natur

Mendelian randomization study of B-type natriuretic peptide and type 2 diabetes: evidence of causal association from population studies

<p>Background: Genetic and epidemiological evidence suggests an inverse association between B-type natriuretic peptide (BNP) levels in blood and risk of type 2 diabetes (T2D), but the prospective association of BNP with T2D is uncertain, and it is unclear whether the association is confounded.</p> <p>Methods and Findings: We analysed the association between levels of the N-terminal fragment of pro-BNP (NT-pro-BNP) in blood and risk of incident T2D in a prospective case-cohort study and genotyped the variant rs198389 within the BNP locus in three T2D case-control studies. We combined our results with existing data in a meta-analysis of 11 case-control studies. Using a Mendelian randomization approach, we compared the observed association between rs198389 and T2D to that expected from the NT-pro-BNP level to T2D association and the NT-pro-BNP difference per C allele of rs198389. In participants of our case-cohort study who were free of T2D and cardiovascular disease at baseline, we observed a 21% (95% CI 3%-36%) decreased risk of incident T2D per one standard deviation (SD) higher log-transformed NT-pro-BNP levels in analysis adjusted for age, sex, body mass index, systolic blood pressure, smoking, family history of T2D, history of hypertension, and levels of triglycerides, high-density lipoprotein cholesterol, and low-density lipoprotein cholesterol. The association between rs198389 and T2D observed in case-control studies (odds ratio = 0.94 per C allele, 95% CI 0.91-0.97) was similar to that expected (0.96, 0.93-0.98) based on the pooled estimate for the log-NT-pro-BNP level to T2D association derived from a meta-analysis of our study and published data (hazard ratio = 0.82 per SD, 0.74-0.90) and the difference in NT-pro-BNP levels (0.22 SD, 0.15-0.29) per C allele of rs198389. No significant associations were observed between the rs198389 genotype and potential confounders.</p> <p>Conclusions: Our results provide evidence for a potential causal role of the BNP system in the aetiology of T2D. Further studies are needed to investigate the mechanisms underlying this association and possibilities for preventive interventions.</p&gt

Anti-HIV-1 activity of cellulose acetate phthalate: Synergy with soluble CD4 and induction of "dead-end" gp41 six-helix bundles

BACKGROUND: Cellulose acetate phthalate (CAP), a promising candidate microbicide for prevention of sexual transmission of the human immunodeficiency virus type 1 (HIV-1) and other sexually transmitted disease (STD) pathogens, was shown to inactivate HIV-1 and to block the coreceptor binding site on the virus envelope glycoprotein gp120. It did not interfere with virus binding to CD4. Since CD4 is the primary cellular receptor for HIV-1, it was of interest to study CAP binding to HIV-1 complexes with soluble CD4 (sCD4) and its consequences, including changes in the conformation of the envelope glycoprotein gp41 within virus particles. METHODS: Enzyme-linked immunosorbent assays (ELISA) were used to study CAP binding to HIV-1-sCD4 complexes and to detect gp41 six-helix bundles accessible on virus particles using antibodies specific for the α-helical core domain of gp41. RESULTS: 1) Pretreatment of HIV-1 with sCD4 augments subsequent binding of CAP; 2) there is synergism between CAP and sCD4 for inhibition of HIV-1 infection; 3) treatment of HIV-1 with CAP induced the formation of gp41 six-helix bundles. CONCLUSIONS: CAP and sCD4 bind to distinct sites on HIV-1 IIIB and BaL virions and their simultaneous binding has profound effects on virus structure and infectivity. The formation of gp41 six-helical bundles, induced by CAP, is known to render the virus incompetent for fusion with target cells thus preventing infection

Neurocranial osteology and neuroanatomy of a late Cretaceous Titanosaurian Sauropod from Spain (Ampelosaurus sp.)

Titanosaurians were a flourishing group of sauropod dinosaurs during Cretaceous times. Fossils of titanosaurians have been found on all continents and their remains are abundant in a number of Late Cretaceous sites. Nonetheless, the cranial anatomy of titanosaurians is still very poorly known. The Spanish latest Cretaceous locality of "Lo Hueco" yielded a relatively well preserved, titanosaurian braincase, which shares a number of phylogenetically restricted characters with Ampelosaurus atacis from France such as a flat occipital region. However, it appears to differ from A. atacis in some traits such as the greater degree of dorsoventral compression and the presence of proatlas facets. The specimen is, therefore, provisionally identified as Ampelosaurus sp. It was CT scanned, and 3D renderings of the cranial endocast and inner-ear system were generated. Our investigation highlights that, although titanosaurs were derived sauropods with a successful evolutionary history, they present a remarkably modest level of paleoneurological organization. Compared with the condition in the basal titanosauriform Giraffatitan brancai, the labyrinth of Ampelosaurus sp. shows a reduced morphology. The latter feature is possibly related to a restricted range of head-turning movementsThis is a contribution to the research project CGL2009-12143 (Ministerio de Economía y Competitividad, Madrid), of which FK, who is currently supported by the Ramón y Cajal Program, is Principal Investigator. LMW and RCR acknowledge funding support from the United States National Science Foundation (IBN-9601174, IBN-0343744, IOB-0517257, IOS-1050154) and the Ohio University Heritage College of Osteopathic Medicine. The Ohio Supercomputing Center also provided suppor

Personalised profiling to identify clinically relevant changes in tremor due to multiple sclerosis

Background: There is growing interest in sensor-based assessment of upper limb tremor in multiple sclerosis and other movement disorders. However, previously such assessments have not been found to offer any improvement over conventional clinical observation in identifying clinically relevant changes in an individual's tremor symptoms, due to poor test-retest repeatability. Method: We hypothesised that this barrier could be overcome by constructing a tremor change metric that is customised to each individual's tremor characteristics, such that random variability can be distinguished from clinically relevant changes in symptoms. In a cohort of 24 people with tremor due to multiple sclerosis, the newly proposed metrics were compared against conventional clinical and sensor-based metrics. Each metric was evaluated based on Spearman rank correlation with two reference metrics extracted from the Fahn-Tolosa-Marin Tremor Rating Scale: a task-based measure of functional disability (FTMTRS B) and the subject's self-assessment of the impact of tremor on their activities of daily living (FTMTRS C). Results: Unlike the conventional sensor-based and clinical metrics, the newly proposed ’change in scale’ metrics presented statistically significant correlations with changes in self-assessed impact of tremor (max R2>0.5,p< 0.05 after correction for false discovery rate control). They also outperformed all other metrics in terms of correlations with changes in task-based functional performance (R2=0.25 vs. R2=0.15 for conventional clinical observation, both p< 0.05).Conclusions: The proposed metrics achieve an elusive goal of sensor-based tremor assessment: improving on conventional visual observation in terms of sensitivity to change. Further refinement and evaluation of the proposed techniques is required, but our core findings imply that the main barrier to translational impact for this application can be overcome. Sensor-based tremor assessments may improve personalised treatment selection and the efficiency of clinical trials for new treatments by enabling greater standardisation and sensitivity to clinically relevant changes in symptoms

Mechanical properties of double-layer and graded composite coatings of YSZ obtained by atmospheric plasma spraying

Double-layer and graded composite coatings of yttria-stabilized zirconia were sprayed on metallic substrates by atmospheric plasma spray. The coating architecture was built up by combining two different feedstocks: one micro- and one nanostructured. Microstructural features and mechanical properties (hardness and elastic modulus) of the coatings were determined by FE-SEM microscopy and nanoindentation technique, respectively. Additional adherence and scratch tests were carried out in order to assess the failure mechanisms occurring between the layers comprising the composites. Microstructural inspection of the coatings confirms the two-zone microstructure. This bimodal microstructure which is exclusive of the layer obtained from the nanostructured feedstock negatively affects the mechanical properties of the whole composite. Nanoindentation tests suitably reproduce the evolution of mechanical properties through coatings thickness on the basis of the position and/or amount of nanostructured feedstock used in the depositing layer. Adhesion and scratch tests show the negative effect on the coating adhesion of layer obtained from the nanostructured feedstock when this layer is deposited on the bond coat. Thus, the poor integrity of this layer results in lower normal stresses required to delaminate the coating in the adhesion test as well as minor critical load registered by using the scratch test.This work has been supported by the Spanish Ministry of Science and Innovation (Project MAT2012-38364-C03) and co-funded by ERDF (European Regional Development Funds).Carpio-Cobo, P.; Rayón Encinas, E.; Salvador Moya, MD.; Lusvarghi, L.; Sanchez, E. (2016). Mechanical properties of double-layer and graded composite coatings of YSZ obtained by atmospheric plasma spraying. Journal of Thermal Spray Technology. 25(4):778-787. https://doi.org/10.1007/s11666-016-0390-zS778787254Y.S. Tian, C.Z. Chen, D.Y. Wang, and J.I. Quianmao, Recent Developments in Zirconia Thermal Barrier Coatings, Surf. Rev. Lett., 2005, 12, p 369-378S. Sampath, U. Schulz, M.O. Jarligo, and S. Kuroda, Processing Science of Advanced Thermal-Barrier Systems, MRS Bull., 2012, 37(10), p 903-910D.R. Clarke, M. Oeschsner, and N.P. Padture, Thermal-Barrier Coatings for More Efficient Gas-Turbine Engines, MRS Bull., 2012, 37(10), p 891-898A. Feuersein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage, and N. Hitchman, Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review, J. Therm. Spray Technol., 2008, 17(2), p 199-213R.S. Lima and B.R. Marple, Thermal Spray Coatings Engineered from Nanostructured Ceramic Agglomerated Powders for Structural, Thermal Barrier and Biomedical Applications: A Review, J. Therm. Spray Technol., 2007, 16(1), p 40-63P. Fauchais, G. Montavon, R.S. Lima, and B.R. Marple, Engineering a New Class of Thermal Spray Nano-based Microstructures from Agglomerated Nanostructured Particles, Suspensions and Solutions: An Invited Review, J. Phys. D Appl. Phys., 2011, 44(9), p 093001P. Carpio, Q. Blochet, B. Pateyron, L. Pawlowski, M.D. Salvador, A. Borrell, and E. Sánchez, Correlation of Thermal Conductivity of Suspension Plasma Sprayed Yttira Stabilized Zirconia Coatings with some Microstructural Effects, Mater. Lett., 2013, 107, p 370-373R. Vassen, A. Stuke, and D. Stöver, Recent Developments in the Field of Thermal Barrier Coatings, J. Therm. Spray Technol., 2009, 18(2), p 181-186H. Dai, X. Zhong, J. Li, Y. Zhang, J. Meng, and X. Cao, Thermal Stability of Double-Ceramic-Layer Thermal Barrier Coatings with Various Coating Thickness, Mater. Sci. Eng. A—Struct., 2006, 433(1), p 1–7V. Viswanathan, G. Dwivedi, and S. Sampath, Multimaterial Thermal Barrier Coating Systems: Design, Synthesis, and Performance Assessment, J. Am. Ceram. Soc., 2015, 98(6), p 1769-1777M. Saremi and Z. Valefi, Thermal and Mechanical Properties of Nano-YSZ-Alumina Functionally Graded Coatings Deposited by Nano-agglomerated Powder Plasma Spraying, Ceram. Int., 2014, 40(8), p 13453-13459A. Portinham, V. Teixeira, J. Carneiro, J. Martins, M.F. Costa, R. Vassen, and D. Stoever, Characterization of Thermal Barrier Coatings with a Gradient Porosity, Surf. Coat. Technol., 2005, 195(2), p 245-251P. Carpio, E. Bannier, M.D. Salvador, R. Benavente, and E. Sánchez, Multilayer and Particle Size-Graded YSZ Coatings Obtained by Plasma Spraying of Micro- and Nanostructured Feedstocks, J. Therm. Spray Technol., 2014, 23(8), p 1362-1372S. Nath, I. Manna, and J.D. Majumdar, Nanomechanical Behavior of Yttria Stabilized Zirconia (YSZ) Based Thermal Barrier Coating, Ceram. Int., 2015, 41(4), p 5247-5256P. Carpio, E. Rayón, L. Pawlowski, A. Cattini, R. Benavente, E. Bannier, M.D. Salvador, and E. Sánchez, Microstructure and Indentation Mechanical Properties of YSZ Nanostructured Coatings Obtained by Suspension Plasma Spraying, Surf. Coat. Technol., 2013, 220, p 237-243H.B. Guo, H. Murakami, and S. Kuroda, Effect of Hollow Spherical Powder Size Distribution on Porosity and Segmentation Cracks in Thermal Barrier Coatings, J. Am. Ceram. Soc., 2006, 89(12), p 3797-3804R.S. Lima, A. Kucuk, and C.C. Berndt, Integrity of Nanostructured Partially Stabilized Zirconia After Plasma Spray Processing, Mater. Sci. Eng. A, 2001, 313(1), p 75-82E. Rayón, V. Bonache, M.D. Salvador, and E. Sánchez, Hardness and Young’s Modulus Distributions in Atmospheric Plasma Sprayed WC-Co Coatings Using Nanoindentation, Surf. Coat. Technol., 2011, 205(17), p 4192-4197J.A. Wollmershauser, B.N. Feigelson, E.P. Gorzkowski, C.T. Ellis, R. Goswami, S.B. Qadri, J.G. Tischler, F.J. Kub, and R.K. Everett, An Extend Hardness Limit in Bulk Nanoceramics, Acta Mater., 2014, 69, p 9-16L. Wang, Y. Wang, X.G. Sun, J.Q. He, Z.Y. Pan, and C.H. Wang, Microstructure and Indentation Mechanical Properties of Plasma Sprayed Nano-Bimodal and Conventional ZrO2-8 wt% Y2O3 Thermal Barrier Coatings, Vacuum, 2012, 86(8), p 1174-1185G.S. Barroso, W. Krenkel, and G. Motz, Low Thermal Conductivity Coating System for Application up to 1000 °C by Simple PDC Processing with Active and Passive Fillers, J. Eur. Ceram. Soc., 2015, 35(12), p 3339-3348R. Ghasemi, R. Shoja-Razavi, R. Mozafarinia, H. Jamali, M. Hajizadh-Oghaz, and R. Ahmadi-Pidani, The Influence of Laser Treatment on Hot Corrosion Behavior of Plasma-Sprayed Nanostructured Yttria Stabilized Zirconia Thermal Barrier Coatings, J. Eur. Ceram. Soc., 2014, 34(8), p 2013-2021E. Rayón, V. Bonache, M.D. Salvador, E. Bannier, E. Sánchez, A. Denoirjean, and H. Ageorges, Nanoindentation Study of the Mechanical and Damage Behaviour of Suspension Plasma Sprayed TiO2 Coatings, Surf. Coat. Technol., 2012, 206(10), p 2655-2660J.J. Roa, E. Jiménez-Piqué, R. Martínez, G. Ramírez, J.M. Tarragó, R. Rodríguez, and L. Llanes, Contact Damage and Fracture Micromechanisms of Multilayered TiN/CrN Coatings at Micro- and Nano-length Scales, Thin Solid Films, 2014, 571(2), p 308-31