14 research outputs found
Recommended from our members
Intercomparison of methods of coupling between convection and large-scale circulation: 1. Comparison over uniform surface conditions
As part of an international intercomparison project, a set of single column models (SCMs) and cloud-resolving models (CRMs) are run under the weak temperature gradient (WTG) method and the damped gravity wave (DGW) method. For each model, the implementation of the WTG or DGW method involves a simulated column which is coupled to a reference state defined with profiles obtained from the same model in radiative-convective equilibrium. The simulated column has the same surface conditions as the reference state and is initialized with profiles from the reference state. We performed systematic comparison of the behavior of different models under a consistent implementation of the WTG method and the DGW method and systematic comparison of the WTG and DGW methods in models with different physics and numerics.
CRMs and SCMs produce a variety of behaviors under both WTG and DGW methods. Some of the models reproduce the reference state while others sustain a large-scale circulation which results in either substantially lower or higher precipitation compared to the value of the reference state. CRMs show a fairly linear relationship between precipitation and circulation strength. SCMs display a wider range of behaviors than CRMs. Some SCMs under the WTG method produce zero precipitation. Within an individual SCM, a DGW simulation and a corresponding WTG simulation can produce different signed circulation.
When initialized with a dry troposphere, DGW simulations always result in a precipitating equilibrium state. The greatest sensitivities to the initial moisture conditions occur for multiple stable equilibria in some WTG simulations, corresponding to either a dry equilibrium state when initialized as dry or a precipitating equilibrium state when initialized as moist. Multiple equilibria are seen in more WTG simulations for higher SST. In some models, the existence of multiple equilibria is sensitive to some parameters in the WTG calculations
LMDZ5B: the atmospheric component of the IPSL climate model with revisited parameterizations for clouds and convection
Evaluation of a mesoscale dispersion modelling tool during the CAPITOUL experiment
Atmospheric transport and dispersion were investigated during the CAPITOUL campaign using measurements of sulphur hexafluoride (SF6) tracer. Six releases of SF6 tracer were performed (March 9-11 and July 1-3, 2004) in the same suburban area of Toulouse conurbation, during the Intensive Observing Periods (IOP) of CAPITOUL. Concentration data were collected both at ground-level along axes perpendicular to the wind direction (at distances ranging between 280 m and 5000 m from the release point), and above the ground at 100 m and 200 m height using aircraft flights. Meteorological conditions were all associated with daytime anticyclonic conditions with weak winds and convective clear and cloudy boundary layers. A meso-scale dispersion modelling system, PERLE, developed at Meteo-France for environmental emergencies in case of atmospheric accidental release, was evaluated in terms of meteorology and dispersion, for the different tracer experiments, in its operational configuration. PERLE is based on the combination of the non-hydrostatic meso-scale MESO-NH model, running at 2 km horizontal resolution, and the Lagrangian particle model SPRAY. The statistical meteorological evaluation includes two sets of simulations with initialisation from ECMWF or ALADIN. The meteorological day-to-day error statistics show fairly good Meso-NH predictions, in terms of wind speed, wind direction and near-surface temperature. A strong sensitivity to initial fields concerns the surface fluxes, crucial for dispersion, with an excessive drying of the convective boundary layer with ALADIN initial fields, leading to an overprediction of surface sensible heat fluxes. A parameterization of dry and shallow convection according to the Eddy-Diffusivity-Mass-Flux (EDMF) approach (Pergaud et al. 2008) allows an efficient mixing in the Convective Boundary Layer (CBL) and improves significantly the wind fields. A statistical evaluation of the dispersion prediction was then performed and shows a realistic behaviour of the system, with a good location of the concentration maxima. But the lateral spread of the plumes is quasi-systematically underestimated, mainly in July, even when meteorological conditions are well reproduced. In the same way, higher integrated concentration values are slightly overestimated. The remove of the EDMF scheme in Meso-NH artificially improves the horizontal dispersion, underlying compensating errors. Sensitivity tests performed on the Lagrangian time scales in the coupling Meso-NH-SPRAY have been conducted. But they don't solve the shortcoming and lead to the conclusion that SPRAY could have some difficulties to correctly reproduce the mixing for daytime thermal convection. © Springer-Verlag 2008
The representation of dry-season low-level clouds over Western Equatorial Africa in reanalyses and historical CMIP6 simulations
International audienceWithin the equatorial zone, Western Equatorial Africa (WEA) has a record low sunshine duration during the June-September dry season due to the persistence of low clouds. This study examines the ability of two reanalysis products (ERA5 and MERRA-2) and eight CMIP6 models (both coupled and atmosphere-only historical simulations) to reproduce the climatology of these low clouds, by comparing it with ground observations and a satellite product. All datasets show a reasonable representation of the regional distribution of low clouds over the Tropical Atlantic and the neighbouring African continent. However, CMIP6 models tend to underestimate the low cloud fraction, especially over WEA in the coupled simulations. This underestimation is partly due to an insufficient seasonal sea-surface temperature (SST) cooling over the Eastern Equatorial Atlantic from April to July in most models, which reduces the lower-tropospheric stability (LTS). However, the inability to reproduce the JJAS low cloud fraction does not necessarily scale with the SST biases of the CMIP6 models. Observed interannual variations of WEA low-cloud fraction are strongly controlled by LTS, itself mostly related to Atlantic SST. The strong dependence of low clouds on interannual SST variations is captured by most, but not all the CMIP6 models. Additional drivers of interannual variations identified in this study, such as mid-tropospheric temperatures over WEA and Bight of Bonny surface winds, emerge inconsistently in CMIP6. Further analyses are needed to disentangle the roles played by SST and independent atmospheric forcings on WEA low cloud formation
Overview of the Meso-NH model version 5.4 and its applications
This paper presents the Meso-NH model version 5.4. Meso-NH is an atmospheric
non hydrostatic research model that is applied to a broad range of
resolutions, from synoptic to turbulent scales, and is designed for studies
of physics and chemistry. It is a limited-area model employing advanced
numerical techniques, including monotonic advection schemes for scalar
transport and fourth-order centered or odd-order WENO advection schemes for
momentum. The model includes state-of-the-art physics parameterization
schemes that are important to represent convective-scale phenomena and
turbulent eddies, as well as flows at larger scales. In addition, Meso-NH has
been expanded to provide capabilities for a range of Earth system prediction
applications such as chemistry and aerosols, electricity and lightning,
hydrology, wildland fires, volcanic eruptions, and cyclones with ocean
coupling. Here, we present the main innovations to the dynamics and physics
of the code since the pioneer paper of Lafore et al. (1998) and provide an
overview of recent applications and couplings
High-Frequency Response of the Atmospheric Electric Potential Gradient Under Strong and Dry Boundary-Layer Convection
The Angola Low: relationship with southern African rainfall and ENSO
The main states of the Angola Low (AL) are identified using clustering analysis applied to daily anomalous patterns of 700-hPa wind vorticity over Angola and adjacent countries from November to March for the 1980/81â2014/15 period. At the daily timescale, we examine the extent to which the main states of the AL modulate daily rainfall over southern Africa. At the interannual timescale, we assess both the relationship between the occurrence of these AL states and El Niño southern oscillation (ENSO) and the role of the AL in explaining ENSOâs failure in driving southern African rainfall at times. Three reanalyses are considered to account for uncertainties induced by the scarcity of data available for assimilation over southern Africa. Three preferential states of the Angola Low are identified: AL state close to its seasonal climatology with slight zonal displacements, anomalously weak AL state and anomalously strong AL state with meridional displacements. These different states all significantly modulate daily southern African rainfall. Near-climatological AL state promotes wet rainfall anomalies over eastern subtropical southern Africa and dry rainfall anomalies over its western part. A slight westward shift in the near-climatological position of the AL leads to reversed zonal gradient in rainfall. The remaining regimes significantly modulate the meridional gradient in southern African rainfall. Anomalously weak and anomalously northward AL states promote wet rainfall anomalies over tropical southern Africa and dry rainfall anomalies over subtropical southern Africa. The reverse prevails for anomalously southward AL. At the interannual timescale, ENSO significantly modulates the seasonal occurrence of most AL states in the three reanalyses. Anomalously weak and southward AL states are more strongly correlated with regional rainfall than ENSO in all reanalyses, suggesting that accounting for AL variability may improve seasonal forecasts. Case study analysis of the major 1982/83 and 1997/98 El Niño events suggests that the weak rainfall anomalies and strong seasonal AL in 1997/98 may result from counteracting effects between ENSO and Indian Ocean coupled modes of variability
Resolved Versus Parametrized Boundary-Layer Plumes. Part III: Derivation of a Statistical Scheme for Cumulus Clouds
Evaluation of the lake model FLake over a coastal lagoon during the THAUMEX field campaign
The THAUMEX measurement campaign, carried out during the summer of 2011 in Thau, a coastal lagoon in southern France, focused on episodes of marine breezes. During the campaign, three intensive observation periods (IOPs) were conducted and a large amount of data were collected. Subsequently, standalone modelling using the FLake lake model was used, first to assess the surface temperature and the surface energy balance, and second to determine the energy budget of the water column at the measurement site. Surface fluxes were validated against in situ measurements, and it was determined that heat exchanges are dominated by evaporation. We also demonstrated that the model was sensitive to the light extinction coefficient at Thau, due to its shallowness and clarity nature. A heat balance was calculated, and the inclusion of a radiative temperature has improved it, especially by reducing the nocturnal evaporation. The FLake lake model was then evaluated in three-dimensional numerical simulations performed with the Meso-NH mesoscale model, in order to assess the changing structure of the boundary layer above the lagoon during the IOPs more accurately. We highlighted the first time ever when Meso-NH and FLake were coupled and proved the ability of the coupled system to forecast a complex phenomenon but also the importance of the use of the FLake model was pointed out. We demonstrated the impact of the lagoon and more precisely the Lido, a sandy strip of land between the lagoon and the Mediterranean Sea, on the vertical distribution of turbulent kinetic energy, evidence of the turbulence induced by the breeze. This study showed the complementarities between standalone and coupled simulations