27 research outputs found
Nanofiber-based filters as novel barrier systems for nanomaterial exposure scenarios
In this article our latest advances in the development of efficient barrier systems against micro- and nano-particulate materials are presented. Nanofibrous polyamide 6 (PA6) mats were fabricated by electrospinning onto a nonwoven viscose substrate. The influence of electrospinning parameters including solution concentration, viscosity, and conductivity, were studied for the production of nonwovens with different fiber size distribution ranging from 74 to 261 nm in diameters. Moreover, the formation of nanowebs (30-40 nm) which are widely distributed among fibers was observed. By varying several process parameters, membranes with different thickness of the nanofiber layer and therefore air permeability and nanoparticle filtration efficiency were obtained.The financial support of this work was provided by MICINN (Spanish Ministry of Science and
Innovation) and ERDF (European Regional Development Fund) (ref: PSE-420000-2008-003)
Analysis of multivariate stochastic signals sampled by on-line particle analyzers: Application to the quantitative assessment of occupational exposure to NOAA in multisource industrial scenarios (MSIS)
In multisource industrial scenarios (MSIS) coexist NOAA generating activities with other productive sources of airborne particles, such as parallel processes of manufacturing or electrical and diesel machinery. A distinctive characteristic of MSIS is the spatially complex distribution of aerosol sources, as well as their potential differences in dynamics, due to the feasibility of multi-task configuration at a given time. Thus, the background signal is expected to challenge the aerosol analyzers at a probably wide range of concentrations and size distributions, depending of the multisource configuration at a given time. Monitoring and prediction by using statistical analysis of time series captured by on-line particle analyzersin industrial scenarios, have been proven to be feasible in predicting PNC evolution provided a given quality of net signals (difference between signal at source and background). However the analysis and modelling of non-consistent time series, influenced by low levels of SNR (Signal-Noise Ratio) could build a misleading basis for decision making. In this context, this work explores the use of stochastic models based on ARIMA methodology to monitor and predict exposure values (PNC). The study was carried out in a MSIS where an case study focused on the manufacture of perforated tablets of nano-TiO2 by cold pressing was performed.Research carried out by projects SCAFFOLD and EHS Advance were made possible thanks to
funding from European Commission through FP7 (GA 319092) and Basque Country Government
through ETORTEK Programme
Feature selection for automatic analysis of emotional response based on nonlinear speech modeling suitable for diagnosis of Alzheimer׳s disease
Alzheimer׳s disease (AD) is the most common type of dementia among the elderly. This work is part of a larger study that aims to identify novel technologies and biomarkers or features for the early detection of AD and its degree of severity. The diagnosis is made by analyzing several biomarkers and conducting a variety of tests (although only a post-mortem examination of the patients’ brain tissue is considered to provide definitive confirmation). Non-invasive intelligent diagnosis techniques would be a very valuable diagnostic aid. This paper concerns the Automatic Analysis of Emotional Response (AAER) in spontaneous speech based on classical and new emotional speech features: Emotional Temperature (ET) and fractal dimension (FD). This is a pre-clinical study aiming to validate tests and biomarkers for future diagnostic use. The method has the great advantage of being non-invasive, low cost, and without any side effects. The AAER shows very promising results for the definition of features useful in the early diagnosis of AD
nanoSTAIR: a new strategic proposal to impulse standardization in nanotechnology research
Nanotechnology is considered one of the key technologies of the 21st century within Europe and a Key-Enabling Technology (KET) by Horizon 2020. Standardization has been identified in H2020 as one of the innovation-support measures by bridging the gap between research and the market, and helping the fast and easy transfer of research results to the European and international market. The development of new and improved standards requires high quality technical information, creating a fundamental interdependency between the standardization and research communities. In the frame of project nanoSTAIR (GA 319092), the present paper describes the European scenario on research and standardization in nanotechnology and presents a proposal of a European strategy (nanoSTAIR) to impulse direct "pipelines" between research and standardization. In addition, strategic actions focused on integration of standardization in the R&D projects, from the early stages of the design of a future business (Project Proposal), are also described.European Commission, through the Seventh Framework Programme (GA 319092)
Occupational exposure to nano-TiO2 in the life cycle steps of new depollutant mortars used in construction
The present work is focused on the measurement of workers exposure to nano-TiO2
in the life cycle steps of depollutant mortars. It has been done in the framework of the
SCAFFOLD project, which aims at the management of potential risks arising from the use of
manufactured nanomaterials in construction. Main findings can be summarized as follows: (1)
The occupational exposure to nano- TiO2 is below 0.3 mg/m3 for all measured scenarios. The
highest concentrations were measured during the cleaning task (in the nano- TiO2
manufacturing process) and during the application (spraying) of depollutant coatings on a wall.
(2) It was found a high release of particles above the background in several tasks as expected
due to the nature of the activities performed. The maximum concentration was measured
during drilling and during adding powder materials (mean total particle concentration up to
5.591E+04 particles/cm3 and 5.69E+04 particles/cm3). However, considering data on total
particle concentration released, no striking differences have been observed when tasks have
been performed using conventional materials in the sector (control) and when using materials
doped with nano-objects.European Commission's FP
Strategies, methods and tools for managing nanorisks in construction
This paper presents a general overview of the work carried out by European project SCAFFOLD (GA 280535) during its 30 months of life, with special emphasis on risk management component. The research conducted by SCAFFOLD is focused on the European construction sector and considers 5 types of nanomaterials (TiO2, SiO2, carbon nanofibres, cellulose nanofibers and nanoclays), 6 construction applications (Depollutant mortars, selfcompacting concretes, coatings, self-cleaning coatings, fire resistant panels and insulation materials) and 26 exposure scenarios, including lab, pilot and industrial scales. The document focuses on the structure, content and operation modes of the Risk Management Toolkit developed by the project to facilitate the implementation of "nano-management" in construction companies. The tool deploys and integrated approach OHSAS 18001 - ISO 31000 and is currently being validated on 5 industrial case studies.Research carried out by project SCAFFOLD was made possible thanks to funding from the European
Commission, through the Seventh Framework Programme (GA 280535
Registro Español de Trasplante Cardiaco. XXXI Informe Oficial de la Asociación de Insuficiencia Cardiaca de la Sociedad Española de Cardiología
Introducción y objetivos
Se presentan las características clínicas y los resultados de los trasplantes cardiacos realizados en España con la actualización correspondiente a 2019.
Métodos
Se describen las características clínicas y los resultados de los trasplantes cardiacos realizados en 2019, así como las tendencias de estos en el periodo 2010-2018.
Resultados
En 2019 se realizaron 300 trasplantes (8.794 desde 1984; 2.745 entre 2010 y 2019). Respecto a años previos, los cambios más llamativos son el descenso hasta el 38% de los trasplantes realizados en código urgente, y la consolidación en el cambio de asistencia circulatoria pretrasplante, con la práctica desaparición del balón de contrapulsación (0, 7%), la estabilización del uso del oxigenador extracorpóreo de membrana (9, 6%) y el aumento de los dispositivos de asistencia ventricular (29%). La supervivencia en el trienio 2016-2018 es similar a la del trienio 2013-2015 (p = 0, 34), y ambas mejores que la del trienio 2010-2012 (p = 0, 002 y p = 0, 01 respectivamente).
Conclusiones
Se mantienen estables tanto la actividad del trasplante cardiaco en España como los resultados en supervivencia en los últimos 2 trienios. Hay una tendencia a realizar menos trasplantes urgentes, la mayoría con dispositivos de asistencia ventricular.
Introduction and objectives: The present report describes the clinical characteristics and outcomes of heart transplants in Spain and updates the data to 2019.
Methods: We describe the clinical characteristics and outcomes of heart transplants performed in Spain in 2019, as well as trends in this procedure from 2010 to 2018.
Results: In 2019, 300 transplants were performed (8794 since 1984; 2745 between 2010 and 2019). Compared with previous years, the most notable findings were the decreasing rate of urgent transplants (38%), and the consolidation of the type of circulatory support prior to transplant, with an almost complete disappearance of counterpulsation balloon (0.7%), stabilization in the use of extracorporeal membrane oxygenation (9.6%), and an increase in the use of ventricular assist devices (29.0%). Survival from 2016 to 2018 was similar to that from 2013 to 2015 (P = .34). Survival in both these periods was better than that from 2010 to 2012 (P = .002 and P = .01, respectively).
Conclusions: Heart transplant activity has remained stable during the last few years, as have outcomes (in terms of survival). There has been a trend to a lower rate of urgent transplants and to a higher use of ventricular assist devices prior to transplant
Revista de Vertebrados de la Estación Biológica de Doñana
Tiempo y orden de aparición de las escamas en el salmón del Atlántico (Salmo salar)Estudios sobre el sapo corredor (Bufo calamita) en el sur de España.III. ReproducciónInfluencia de las carecterísticas del medio acuático sobre las poblaciones de larvas de anfibios en lala Reserva Biológica de Doñana(Huelva, EspañaDieta de la cigüeñuela (Himantopus himantopus) en las salinas del estuario del GuadianaOrientación y selección del lugar del nido en el gorrión moruno (Passer hispaniolensis)la avifauna de las Vegas Bajas del Guadianala reproducción de la malvasía (Oxyura leucocephala) en el sur de la provincia de Córdoba, España.La alimentación de la curruca cabecinegra (Sylvia melanocephala, Gmelin 1788) en olivares de la provincia de Jaén (otoño-invierno)Consideraciones sobre el efecto de los conejos y los grandes herbívoros en los pastizales de la Vera de DoñanaAnálisis factorial de las expresiones faciales del babuino sagrado (Papio hamadryas)Contaminación xenobiótica del Parque Nacionalde Doñana. II. Residuos de insecticidas organoclorados, bifenilos policlorados, (PGBs) y metales pesados en Falconiformes y StrigiformesTransferencia total y del y bioacumulación de mercurio y metilmercurio en ecosistemas del Parque Nacional de DoñanaNota sobre la alimentación de larvas de anfibios: I. Pleurodeles waltl en charcas temporaleNota sobre nuevas especies parasitada por el críalo (Clamator glandarius) en EspañaEstructura de la jerarquización en la predación de huevos y pichones en Spheniscus magellanicusPasser domesticus, nueva specie para Bolivia¿Están realmente subalimentados los cernícalos primilla en el valle del Guadalquivir durante el periodo no reproductor?.Nidificación del paiño común (Hydrobates pelagicus) en las Islas Canarias.Nuevos datos sobre la presencia del visón europeo (Mustela lutreola L.) en NavarraLa población de gamos del Parque Nacional de Doñana en 1979Puntualización a la nota "predacción de Falco peregrino y Falco subbuteo sobre quirópteros" de Aymerich y García de Castro aparecida en el vol. 9 de esta revista.Peer reviewe
Promoting the development of safe products based on nanotechnology: The NANOSEGUR project initiative (Basque Country-Spain)
Nanotechnology offers promising innovations and great benefits in many industrial sectors contributing to improve our quality of live. Nowadays, more than 800 consumer products in the market include engineered nanomaterials (ENM) in their formulations In agreement with other countries as USA or Japan, and the recommendation of several organizations with the development of new products for safety (innovation on safety) which will give answer to the potential safety issues. Specifically, the project will focus on three sectors: energy (new dry transformer with fire retardants insulators), food (new packing materials), and automotive industry (new materials for specific components). NANOSEGUR consortium is composed by six industrial partners (4 large companies and 2 SMEs) collaborating with four technological research organizations. The project approach is structured in two axis related to two main groups of activities. The first one is addressed to develop technical tasks to achieve the three mentioned nanotech products. On the other side, the second group of activities is focused on solutions to make the process/products safe, covering specific issues of the three potential target