Re-Source, une archive en temps réel pour la publication et la production

National audienceLafayette anticipation est une fondation d'art contemporain qui met l'accent sur la production et l'accompagnement des artistes. Le projet Lafayette ReSource , une archive sémantique en temps réel, a pour vocation de permettre le suivi de l'ensemble des activités qui contribuent à donner naissance à une oeuvre. Elle entend ainsi faciliter la compréhension du travail réalisé par la fondation en interne, donner au public des prise pour apprécier les oeuvres dans leur déploiement (l'art en train de se faire et non l'art déjà fait) et livrer du même coup aux artistes un nouveau matériau pour la création

Scattering by a cylinder covered with an arbitrary distribution of impedance and application to the optimization of a tramway noise abatement system

International audienceA semi-analytical solution for the two-dimensional scattering of a line source by a cylinder with an arbitrary distribution of surface impedance and its image with respect to a vertical baffle is derived. This description is used to model the shadowing due to a low-height semi-cylindrical noise barrier close to a tramway. After validation against the boundary element method, this solution is used in a gradient-based optimization approach of the admittance distribution to maximize the broadband insertion loss in a given receiver zone. First, a hypothetical but passive distribution is found, showing an improvement of more than 20 dB(A) with respect to a purely rigid barrier. Second, a feasible optimized surface treatment made of a porous layer and a micro-perforated resonant panel is proposed, with an improvement of 14 dB(A) with respect to an entirely rigid barrier and 8 dB(A) with respect to a uniform absorbent barrier. The optimization provides an automatic way of tuning the resonant panel so that the attenuation is enhanced in the frequency band where the source has the most spectral content. The benefit of using a non-uniform admittance distribution is evaluated in this idealized context to be about 8 dB(A)

Application of admittance optimization to the design of a low-height tramway noise barriers

International audienceAn urban low-height barrier meant to attenuate tramway noise emission for nearby walking pedestrians or cyclists is studied. A numerical method coupling the two dimensional BEM and a gradient-based optimization algorithm is proposed to optimize the admittance distribution on the barrier in order to enhance the broadband insertion loss in the shadowing zone. The gradient of the broadband attenuation is calculated e ciently using the adjoint state approach which makes it possible to use a large number of parameters without significant increase of computation time and to consider a barrier of arbitrary shape. A few admittance designs coupling porous layers and micro-perforated resonant panels covering barriers of classical shapes are proposed, all showing an improvement of several dB(A) compared to more simple admittance distributions

Scattering of a cylinder covered with an arbitrary distribution of admittance and application to the design of a tramway noise abatement system

International audienceAn urban low-height barrier meant to attenuate tramway noise emission for nearby walking pedestrians or cyclists is studied. A semi-analytical solution for the two-dimensional scattering of a line source by a cylinder covered by an arbitrary distribution of impedance and its image with respect to a vertical baffle is derived. This description is used to model the shadowing due to a semi-cylindrical noise barrier close to a tramway. This solution is used in a gradient-based optimization approach of the admittance distribution to maximize the broadband insertion loss in a given receiver zone. A feasible optimized surface treatment made of a porous layer and a micro-perforated resonant panel is proposed, with an improvement of 14 dB(A) with respect to an entirely rigid barrier. The optimization gain with respect to a uniform absorbent admittance is about 8 dB(A). Extra tests with the boundary element method show that this gain is reduced but still significant if more realistic conditions are considered

Sensivity-based shape optimization of a rigid tramway low-height noise barrier

International audienceAn urban low-height barrier meant to attenuate tramway noise for nearby walking pedestrians or cyclists is considered. The efficiency of this type of device is known to depend on the shape of the cross section and the acoustic properties of the surface treatment. Some sort of absorptive material is often required to enhance the performance by preventing the multi-reflection phenomenon, however such materials can be costly compared to acoustically rigid materials such as concrete. In this study, a rigid barrier is assumed but its shape is optimized using a sensitivity-based shape optimization algorithm coupled to the two dimensional BEM. The shape is here described in a very general fashion by mesh nodes coordinates, which can involve a large number of variables. Sensitivities with respect to all coordinates are calculated efficiently using the adjoint state approach, without significant increase of computation time. Numerical results show that optimized shapes tend to be quite irregular but provide a significant improvement compared to simpler shapes, especially in the mid and high frequency range. Intensity calculations seem to suggest that this improvement is due to scattering of the incident acoustic energy in the upwards direction, therefore reducing the diffracted energy which reaches the shadow zone. Extra calculations show that the benefit of the optimized shapes can still be significant even in more realistic situations

A defective Krab-domain zinc-finger transcription factor contributes to altered myogenesis in myotonic dystrophy type 1

Myotonic dystrophy type 1 (DM1) is an RNA-mediated disorder caused by a non-coding CTG repeat expansion that, in particular, provokes functional alteration of CUG-binding proteins. As a consequence, several genes with misregulated alternative splicing have been linked to clinical symptoms. In our search for additional molecular mechanisms that would trigger functional defects in DM1, we took advantage of mutant gene-carrying human embryonic stem cell lines to identify differentially expressed genes. Among the different genes found to be misregulated by DM1 mutation, one strongly downregulated gene encodes a transcription factor, ZNF37A. In this paper, we show that this defect in expression, which derives from a loss of RNA stability, is controlled by the RNA-binding protein, CUGBP1, and is associated with impaired myogenesis—a functional defect reminiscent of that observed in DM1. Loss of the ZNF37A protein results in changes in the expression of the subunit α1 of the receptor for the interleukin 13. This suggests that the pathological molecular mechanisms linking ZNF37A and myogenesis may involve the signaling pathway that is known to promote myoblast recruitment during development and regeneratio

Altimetry for the future: Building on 25 years of progress

In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the ‘‘Green” Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments’ development and satellite missions’ evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged).Comment: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editin

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory. Athena is a versatile observatory designed to address the Hot and Energetic Universe science theme, as selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), X-IFU aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over a hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR (i.e. in the course of its preliminary definition phase, so-called B1), browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters, such as the instrument efficiency, spectral resolution, energy scale knowledge, count rate capability, non X-ray background and target of opportunity efficiency. Finally, we briefly discuss the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, touch on communication and outreach activities, the consortium organisation and the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with ESA member state contributions from Belgium, Czech Republic, Finland, Germany, Poland, Spain, Switzerland, with additional contributions from the United States and Japan.The French contribution to X-IFU is funded by CNES, CNRS and CEA. This work has been also supported by ASI (Italian Space Agency) through the Contract 2019-27-HH.0, and by the ESA (European Space Agency) Core Technology Program (CTP) Contract No. 4000114932/15/NL/BW and the AREMBES - ESA CTP No.4000116655/16/NL/BW. This publication is part of grant RTI2018-096686-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This publication is part of grant RTI2018-096686-B-C21 and PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033

Biodiversity recovery of Neotropical secondary forests

Old-growth tropical forests harbor an immense diversity of tree species but are rapidly being cleared, while secondary forests that regrow on abandoned agricultural lands increase in extent. We assess how tree species richness and composition recover during secondary succession across gradients in environmental conditions and anthropogenic disturbance in an unprecedented multisite analysis for the Neotropics. Secondary forests recover remarkably fast in species richness but slowly in species composition. Secondary forests take a median time of five decades to recover the species richness of old-growth forest (80% recovery after 20 years) based on rarefaction analysis. Full recovery of species composition takes centuries (only 34% recovery after 20 years). A dual strategy that maintains both old-growth forests and species-rich secondary forests is therefore crucial for biodiversity conservation in human-modified tropical landscapes. Copyright © 2019 The Authors, some rights reserved