Design of Modular, Shape-transitioning Inlets for a Conical Hypersonic Vehicle

For a hypersonic vehicle, propelled by scramjet engines, integration of the engines and airframe is highly desirable. Thus, the forward capture shape of the engine inlet should conform to the vehicle body shape. Furthermore, the use of modular engines places a constraint on the shape of the inlet sidewalls. Finally, one may desire a combustor cross- section shape that is different from that of the inlet. These shape constraints for the inlet can be accommodated by employing a streamline-tracing and lofting technique. This design technique was developed by Smart for inlets with a rectangular-to-elliptical shape transition. In this paper, we generalise that technique to produce inlets that conform to arbitrary shape requirements. As an example, we show the design of a body-integrated hypersonic inlet on a winged-cone vehicle, typical of what might be used in a three-stage orbital launch system. The special challenge of inlet design for this conical vehicle at an angle-of-attack is also discussed. That challenge is that the bow shock sits relatively close to the vehicle body

Investigation of Vapor-Phase Lubrication in a Gas Turbine Engine,"

ABSTRACT The liquid oil lubrication system of current aircraft jet engines accounts for approximately 10-15% of the total weight of the engine. It has long been a koal of the aircraft gas turbine industry to reduce this weight. Vapor-Phase Lubrication (VPL) is a promising technology to eliminate liquid oil lubrication. The current investigation resulted in the first gas turbine to operate in the absence of conventional liquid lubrication. A phosphate ester, commercially known as DURAD 6208, was chosen for the test. Extensive research at Wright Laboratory demonstrated that this lubricant could reliably lubricate rolling element bearings in the gas turbine engine environment. The Allison T63 engine was selected as the test vehicle because of its small size and bearing configuration. Specifically, VPL was evaluated in the number eight bearing because it is located in a relatively hot environment, in line with the combustor discharge, and it can be isolated from the other bearings and the liquid lubrication system. The bearing was fully instrumented and its performance with standard oil lubrication was documented. Results of this baseline study were used to develop a thermodynamic model to predict the bearing temperature with VPL. The engine was then operated at a ground idle condition with VPL with the lubricant misted into the #8 bearing at 13 ml/hr. The bearing temperature stabilized at 283°C within 10 minutes. Engine operation was continued successfully for a total of one hour. No abnormal wear of the rolling contact surfaces was found when the bearing was later examined. Bearing temperatures after engine shutdown indicated the bearing had reached thermodynamic equilibrium with its surroundings during the test. After shutdown bearing temperatures steadily decreased without the soakback effect seen after shutdown in standard lubricated bearings. In contrast, the oil lubricated bearing ran at a considerably lower operating temperature (83°C) and was significantly heated by its surroundings after engine shutdown. In the baseline tests, the final bearing temperatures never reached that of the operating VPL system. NOMENCLATUR

Plasma Magnetohydrodynamics and Energy Conversion

Contains research objectives and reportsU. S. Air Force (Aeronautical Systems Division) under Contract AF33 (615)-1083 with the Air Force Aero Propulsion Laboratory, Wright-Patterson Air Force Base, OhioNational Science Foundation (Grant GK-57

Propuesta de virtualización de servidores con Hyper-V en el centro de datos de la Facultad de Ciencias Médicas de la UNAN-Managua

La importancia del crecimiento en la potencia de cómputo y la existencia de problemas relacionados con el uso del hardware, ha hecho de la virtualización la solución más idónea para resolver tales dificultades, dentro de sus propósitos se encuentran hacer uso eficiente de los recursos y disminuir el costo total asociado a los mismos. Este trabajo de investigación fue realizado con la finalidad de proponer una solución para la virtualización servidores. La virtualización es una tecnología que permite la creación de equipos, basados en software, que reproducen el ambiente de una máquina física en sus aspectos de CPU, memoria, almacenamiento y entrada y salida de dispositivos. Se limita a trabajar básicamente con Hyper-V con el fin de acotar y definir la solución de virtualización , debido a la numerosa cantidad de soluciones que existen actualmente, como lo son VMware, Cytrix, entre otros. El enfoque principal se encontrará relacionado principalmente a la virtualización de servidores, a la disposición de Hyper-V para trabajar en cluster y al tipo de cluster que se puede implementar. El objetivo general de este trabajo es entonces, proponer una solución para efectuar la virtualización ya manera explicativa se describe como trabaja un cluster de alta disponibilidad con Hyper-V para efectuar tareas de migración de maquinas virtuales, empleando técnicas propias que vienen incorporadas en el software, como Live Migration ó Quick Migration que facilitan de gran forma la gestión y administración del entorno virtual. También se describirá brevemente los detalles técnicos para la implementación del centro de datos, la disposición de las áreas funcionales, el diagrama de distribución y otros parámetros importantes a tenerse en cuenta para disponer de un centro de datos confiable

New SPB stars in the field of the young open cluster NGC 2244 discovered by the MOST photometric satellite

During two weeks of nearly continuous optical photometry of the young open cluster NGC 2244 obtained by the MOST satellite, we discovered two new SPB stars, GSC 00154-00785 and GSC 00154-01871. We present frequency analyses of the MOST light curves of these stars, which reveal two oscillation frequencies (0.61 and 0.71 c/d) in GSC 00154-00785 and two (0.40 and 0.51 c/d) in GSC 00154-01871. These frequency ranges are consistent with g-modes of $\ell \leq 2$ excited in models of main-sequence or pre-main-sequence (PMS) stars of masses 4.5 - 5 $M_{\odot}$ and solar composition $(X, Z)= (0.7, 0.02)$. Published proper motion measurements and radial velocities are insufficient to establish unambiguously cluster membership for these two stars. However, the PMS models which fit best their eigenspectra have ages consistent with NGC 2244. If cluster membership can be confirmed, these would be the first known PMS SPB stars, and would open a new window on testing asteroseismically the interior structures of PMS stars.Comment: accepted for publication in MNRA

What, if anything, are hybrids: enduring truths and challenges associated with population structure and gene flow

Hybridization is a potent evolutionary process that can affect the origin, maintenance, and loss of biodiversity. Because of its ecological and evolutionary consequences, an understanding of hybridization is important for basic and applied sciences, including conservation biology and agriculture. Herein, we review and discuss ideas that are relevant to the recognition of hybrids and hybridization. We supplement this discussion with simulations. The ideas we present have a long history, particularly in botany, and clarifying them should have practical consequences for managing hybridization and gene flow in plants. One of our primary goals is to illustrate what we can and cannot infer about hybrids and hybridization from molecular data; in other words, we ask when genetic analyses commonly used to study hybridization might mislead us about the history or nature of gene flow and selection. We focus on patterns of variation when hybridization is recent and populations are polymorphic, which are particularly informative for applied issues, such as contemporary hybridization following recent ecological change. We show that hybridization is not a singular process, but instead a collection of related processes with variable outcomes and consequences. Thus, it will often be inappropriate to generalize about the threats or benefits of hybridization from individual studies, and at minimum, it will be important to avoid categorical thinking about what hybridization and hybrids are. We recommend potential sampling and analytical approaches that should help us confront these complexities of hybridization

Determinants of response to a parent questionnaire about development and behaviour in 3 year olds: European multicentre study of congenital toxoplasmosis.

Background: We aimed to determine how response to a parent-completed postal questionnaire measuring development, behaviour, impairment, and parental concerns and anxiety, varies in different European centres. Methods: Prospective cohort study of 3 year old children, with and without congenital toxoplasmosis, who were identified by prenatal or neonatal screening for toxoplasmosis in 11 centres in 7 countries. Parents were mailed a questionnaire that comprised all or part of existing validated tools. We determined the effect of characteristics of the centre and child on response, age at questionnaire completion, and response to child drawing tasks. Results: The questionnaire took 21 minutes to complete on average. 67% (714/1058) of parents responded. Few parents (60/1058) refused to participate. The strongest determinants of response were the score for organisational attributes of the study centre (such as direct involvement in follow up and access to an address register), and infection with congenital toxoplasmosis. Age at completion was associated with study centre, presence of neurological abnormalities in early infancy, and duration of prenatal treatment. Completion rates for individual questions exceeded 92% except for child completed drawings of a man (70%), which were completed more by girls, older children, and in certain centres. Conclusion: Differences in response across European centres were predominantly related to the organisation of follow up and access to correct addresses. The questionnaire was acceptable in all six countries and offers a low cost tool for assessing development, behaviour, and parental concerns and anxiety, in multinational studies

Plasma Magnetohydrodynamics and Energy Conversion

Contains research objectives and reports on six research projects.U. S. Air Force (Aeronautical Systems Division) under Contract AF33 (615)-1083Air Force Aero Propulsion Laboratory, Wright-Patterson Air Force Base, OhioNational Science Foundation (Grant G-24073)National Institutes of Health (Grant No. 5 TI HE 5550-02

Plasmas and Controlled Nuclear Fusion

Contains research objectives and reports on four research projects.National Science Foundation (Grant GK-614)National Science Foundation (Grant GK-57

Plasma Magnetohydrodynamics and Energy Conversion

Contains research objectives and reports on four research projects.U.S. Air Force (Aeronautical Systems Division) under Contract AF33(616)-7624 with the Aeronautical Accessories Laboratory, Wright-Patterson Air Force Base, OhioNational Science Foundation under Grant G-24073National Institutes of Health (Grant HTS-5550