700 research outputs found
Summary Report of FORGE WP4.1.2: verification of critical stress theory applied to repository concepts
This report outlines the major conclusions from an experimental study of 48 separate experiments with the primary aim to verify critical stress theory. Two main types of experiment were conducted: 1). Loading-unloading tests, where fracture flow was monitored at constant injection pressure as normal load was increased in steps to a given level and then reduced back to the starting stress state; 2). Gas breakthrough experiments, where gas injection pressure was increased in a pressure ramp at constant vertical load. These were conducted with and without active shear. It was found that critical stress theory is valid in predicting the preferential flow of gas in relation to the orientation of the fracture plane with respect to the maximum horizontal stress direction. However, loading unloading experiments showed that understanding the stress history of the rocks is of paramount importance and a mere knowledge of the current stress state is insufficient in accurately predicting the nature of fluid flow
Modelling the habitat of the endangered Carpentarian Grasswren (Amytornis dorotheae): The importance of spatio-temporal habitat availability in a fire prone landscape
Species distribution modelling (SDM), a tool increasingly adopted to quantify geographic range size, often predicts speciesâ distributions as static. However, habitat availability may exhibit spatial and temporal variation when dynamic processes, such as fire, determine suitability. Static SDM approaches may not satisfactorily represent this dynamic process. We investigated the potential use of SDM to quantify dynamic habitat availability by applying the MaxEnt SDM technique to model the habitat of the Carpentarian Grasswren (Amytornis dorotheae), an endangered Australian passerine dependent on long unburnt vegetation in a fire prone system. By adjusting a typical SDM approach to incorporate the dynamic nature of fire, we modelled the spatio-temporal variation of suitable habitat over 12 years and compared it to a static modelling approach. Incorporating fire as a dynamic process increased the importance of the fire variable to models (from 35% permutation importance) and improved model performance, as evaluated by the AUC using cross-validation. Our dynamic model revealed sizeable temporal variation in the area and spatial arrangement of suitable habitat that was not apparent in the static model. This result may partly solve the mystery of why the species occurs as widely separated populations despite the presence of seemingly suitable intervening habitat. In areas where the species is no longer found, habitat availability was less consistent due to frequent fire, and fire refugia was more limited and isolated, when compared to sites with recent records. These results demonstrate that, when compared to a static approach, a dynamic SDM approach can lead to improved understanding of dynamic ecological processes, and their impact on a species
Observational evidence confirms modelling of the long-term integrity of CO2-reservoir caprocks
Storage of anthropogenic CO2 in geological formations relies on a caprock as the primary seal preventing buoyant super-critical CO2 escaping. Although natural CO2 reservoirs demonstrate that CO2 may be stored safely for millions of years, uncertainty remains in predicting how caprocks will react with CO2-bearing brines. This uncertainty poses a significant challenge to the risk assessment of geological carbon storage. Here we describe mineral reaction fronts in a CO2 reservoir-caprock system exposed to CO2 over a timescale comparable with that needed for geological carbon storage. The propagation of the reaction front is retarded by redox-sensitive mineral dissolution reactions and carbonate precipitation, which reduces its penetration into the caprock to âŒ7âcm in âŒ105 years. This distance is an order-of-magnitude smaller than previous predictions. The results attest to the significance of transport-limited reactions to the long-term integrity of sealing behaviour in caprocks exposed to CO2.Funding was provided by NERC to the CRIUS consortium (NE/F004699/1), Shell Global Solutions, for GR as part of the Center for Nanoscale Controls on Geologic COâ (NCGC), an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES), under Award # DE-AC02-05CH11231, and DECC, which provided a CCS Innovation grant for completion of this work
Dengue in Madeira Island
This is a preprint of a paper whose final and definite form will be published in the volume
Mathematics of Planet Earth that initiates the book series CIM Series in Mathematical Sciences
(CIM-MS) published by Springer. Submitted Oct/2013; Revised 16/July/2014 and 20/Sept/2014;
Accepted 28/Sept/2014.Dengue is a vector-borne disease and 40% of world population is at risk.
Dengue transcends international borders and can be found in tropical and subtropical
regions around the world, predominantly in urban and semi-urban areas. A
model for dengue disease transmission, composed by mutually-exclusive compartments
representing the human and vector dynamics, is presented in this study. The
data is from Madeira, a Portuguese island, where an unprecedented outbreak was
detected on October 2012. The aim of this work is to simulate the repercussions of
the control measures in the fight of the disease
Measurement of the p-pbar -> Wgamma + X cross section at sqrt(s) = 1.96 TeV and WWgamma anomalous coupling limits
The WWgamma triple gauge boson coupling parameters are studied using p-pbar
-> l nu gamma + X (l = e,mu) events at sqrt(s) = 1.96 TeV. The data were
collected with the DO detector from an integrated luminosity of 162 pb^{-1}
delivered by the Fermilab Tevatron Collider. The cross section times branching
fraction for p-pbar -> W(gamma) + X -> l nu gamma + X with E_T^{gamma} > 8 GeV
and Delta R_{l gamma} > 0.7 is 14.8 +/- 1.6 (stat) +/- 1.0 (syst) +/- 1.0 (lum)
pb. The one-dimensional 95% confidence level limits on anomalous couplings are
-0.88 < Delta kappa_{gamma} < 0.96 and -0.20 < lambda_{gamma} < 0.20.Comment: Submitted to Phys. Rev. D Rapid Communication
Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt{s} = 1.96 TeV using Kinematic Characteristics of Lepton + Jets Events
We present a measurement of the top quark pair ttbar production cross section
in ppbar collisions at a center-of-mass energy of 1.96 TeV using 230 pb**{-1}
of data collected by the DO detector at the Fermilab Tevatron Collider. We
select events with one charged lepton (electron or muon), large missing
transverse energy, and at least four jets, and extract the ttbar content of the
sample based on the kinematic characteristics of the events. For a top quark
mass of 175 GeV, we measure sigma(ttbar) = 6.7 {+1.4-1.3} (stat) {+1.6- 1.1}
(syst) +/-0.4 (lumi) pb, in good agreement with the standard model prediction.Comment: submitted to Phys.Rev.Let
Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt(s)=1.96 TeV using Lepton + Jets Events with Lifetime b-tagging
We present a measurement of the top quark pair () production cross
section () in collisions at TeV
using 230 pb of data collected by the D0 experiment at the Fermilab
Tevatron Collider. We select events with one charged lepton (electron or muon),
missing transverse energy, and jets in the final state. We employ
lifetime-based b-jet identification techniques to further enhance the
purity of the selected sample. For a top quark mass of 175 GeV, we
measure pb, in
agreement with the standard model expectation.Comment: 7 pages, 2 figures, 3 tables Submitted to Phys.Rev.Let
Search for W' bosons decaying to an electron and a neutrino with the D0 detector
This Letter describes the search for a new heavy charged gauge boson W'
decaying into an electron and a neutrino. The data were collected with the D0
detector at the Fermilab Tevatron proton-antiproton Collider at a
center-of-mass energy of 1.96 TeV, and correspond to an integrated luminosity
of about 1 inverse femtobarn. Lacking any significant excess in the data in
comparison with known processes, an upper limit is set on the production cross
section times branching fraction, and a W' boson with mass below 1.00 TeV can
be excluded at the 95% C.L., assuming standard-model-like couplings to
fermions. This result significantly improves upon previous limits, and is the
most stringent to date.Comment: submitted to Phys. Rev. Let
Measurement of the ratios of the Z/G* + >= n jet production cross sections to the total inclusive Z/G* cross section in ppbar collisions at sqrt(s) = 1.96 TeV
We present a study of events with Z bosons and jets produced at the Fermilab
Tevatron Collider in ppbar collisions at a center of mass energy of 1.96 TeV.
The data sample consists of nearly 14,000 Z/G* -> e+e- candidates corresponding
to the integrated luminosity of 0.4 fb-1 collected using the D0 detector.
Ratios of the Z/G* + >= n jet cross sections to the total inclusive Z/G* cross
section have been measured for n = 1 to 4 jet events. Our measurements are
found to be in good agreement with a next-to-leading order QCD calculation and
with a tree-level QCD prediction with parton shower simulation and
hadronization.Comment: 7 pages, 2 figures, slightly modified, submitted to Phys. Lett.
Measurement of the Isolated Photon Cross Section in p-pbar Collisions at sqrt{s}=1.96 TeV
The cross section for the inclusive production of isolated photons has been
measured in p anti-p collisions at sqrt{s}=1.96 TeV with the D0 detector at the
Fermilab Tevatron Collider. The photons span transverse momenta 23 to 300 GeV
and have pseudorapidity |eta|<0.9. The cross section is compared with the
results from two next-to-leading order perturbative QCD calculations. The
theoretical predictions agree with the measurement within uncertainties.Comment: 7 pages, 5 figures, submitted to Phys.Lett.
- âŠ